Cackp 1.23 On C3100 And Wifi Gw-cf11x Problem

[DaemonsGR]

Hello.
I used this card with no problem for the first ~5 times but now has stoped working with an error in dmesg "no PRI firmware"
I read smthnk about new firmware flushing but i have done this only on pcmcia prism2 on linux.

Any help?

thnx,
tasos

[DaemonsGR]

Some more from dmesg:

nesis_sreset: original COR 41
Readback test failed, HCR 0x1f write 00 e1 a1 ff read 00 ce a1 ce
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test succeeded, HCR 0x0f
prism2_pccard_genesis_sreset: original COR 41
wifi0: registered netdevice wlan0
prism2_download: dl_cmd=4 start_addr=0x003f0000 num_areas=3
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test succeeded, HCR 0x0f
prism2_pccard_genesis_sreset: original COR 41
prism2_hw_init: initialized in 40 ms
wifi0: NIC: id=0x8000 v0.0.1
wifi0: PRI: id=0x15 v1.1.2
Could not get RID for component STA
wifi0: Failed to read STA f/w version - only Primary f/w present
prism2_download: dl_cmd=6 start_addr=0x003f0000 num_areas=3
wifi0: test Genesis mode with HCR 0x0f
prism2_pccard_cor_sreset: original COR 41
prism2_pccard_genesis_sreset: original COR 41
Readback test succeeded, HCR 0x0f
prism2_pccard_genesis_sreset: original COR 41
prism2_hw_init: initialized in 80 ms
wifi0: NIC: id=0x801d v1.0.0
wifi0: PRI: id=0x15 v1.1.2
Could not get RID for component STA
wifi0: Failed to read STA f/w version - only Primary f/w present
prism2_download: dl_cmd=5 start_addr=0x003f0c01 num_areas=3
prism2_hw_init: initialized in 60 ms
wifi0: NIC: id=0x801d v1.0.0
wifi0: PRI: id=0x15 v1.1.2
wifi0: STA: id=0x1f v1.8.4
prism2: wlan0: operating mode changed 3 -> 2
hostap_cs: CS_EVENT_PM_SUSPEND
hostap_cs: CS_EVENT_RESET_PHYSICAL
pxa_pcmcia_suspend(0)
wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi0: hfa384x_cmd_issue - timeout - reg=0x8888
wifi0: hfa384x_cmd: entry still in list? (entry=c3a8d560, type=0, res=-1)
wifi0: hfa384x_cmd: interrupted; err=-110
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6)
wifi0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wifi0: hfa384x_cmd_issue - timeout - reg=0x8888
wifi0: hfa384x_cmd: entry still in list? (entry=c3a8d560, type=0, res=-1)
....
......
.........