Author Topic: Hentges 3.5.4.1 For Collie (Read 38339 times)

CoreDump · « **Reply #15 on:** April 12, 2006, 05:09:00 am »

Quote

I am confused.

I found the feed. I am currently running Hentges 3.5.3 T3. That was releases as a system 'package'. This release appears to be back to a module by module format?

That said, I did not see the zImage or initrd releases for 3.4.5.1? Where are they?

Thanks - Dan
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122816\"][{POST_SNAPBACK}][/a][/div]

Check the subdirectories again. The header-text should make it clear what's inside.

For an old-style collie install you'd download the initrd.bin (collie/hentges-*-image*)
and one cardfs file (collie/cardfs/*)

arniel · « **Reply #16 on:** April 12, 2006, 07:49:38 am »

Quote

Quote
I am confused.

I found the feed. I am currently running Hentges 3.5.3 T3. That was releases as a system 'package'. This release appears to be back to a module by module format?

That said, I did not see the zImage or initrd releases for 3.4.5.1? Where are they?

Thanks - Dan
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122816\"][{POST_SNAPBACK}][/a][/div]

Check the subdirectories again. The header-text should make it clear what's inside.

For an old-style collie install you'd download the initrd.bin (collie/hentges-*-image*)
and one cardfs file (collie/cardfs/*)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122819\"][{POST_SNAPBACK}][/a][/div]

Unless I'm mistaken, I can only see German files. Are the English versions about to be uploaded?

CoreDump · « **Reply #17 on:** April 12, 2006, 08:14:59 am »

Quote

Quote
Quote
I am confused.

I found the feed. I am currently running Hentges 3.5.3 T3. That was releases as a system 'package'. This release appears to be back to a module by module format?

That said, I did not see the zImage or initrd releases for 3.4.5.1? Where are they?

Thanks - Dan
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122816\"][{POST_SNAPBACK}][/a][/div]

Check the subdirectories again. The header-text should make it clear what's inside.

For an old-style collie install you'd download the initrd.bin (collie/hentges-*-image*)
and one cardfs file (collie/cardfs/*)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122819\"][{POST_SNAPBACK}][/a][/div]

Unless I'm mistaken, I can only see German files. Are the English versions about to be uploaded?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122833\"][{POST_SNAPBACK}][/a][/div]

Ahem, oops. Well, for the time beeing just select the english language at opies configuration wizzard during first-boot.

h2gofast · « **Reply #18 on:** April 12, 2006, 08:28:48 am »

mucho thanks coredump, the hentges roms have made using the zaurus easier for a non-developer type like myself to get everything up and running.

dansawyer · « **Reply #19 on:** April 12, 2006, 09:52:41 am »

I can not find either a initrd.bin or a cardfs file in this path:

http://oz.hentges.net/hentges-feeds/3.5.4.1/machines/collie/

Am I looking in the right place?

Thanks - Dan

arniel · « **Reply #20 on:** April 12, 2006, 09:57:02 am »

Now I have an error that I'm running the wrong kernel. Kernel from http://hentges.net/tmp/do_not_use/collie/k...60409201626.bin and initrd.bin from http://hentges.net/tmp/do_not_use/collie/h...e_T1-RC4.tar.gz

CoreDump · « **Reply #21 on:** April 12, 2006, 09:57:57 am »

Quote

I can not find either a initrd.bin or a cardfs file in this path:

http://oz.hentges.net/hentges-feeds/3.5.4.1/machines/collie/

Am I looking in the right place?

Thanks - Dan
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

You might want to get your eyes checked
[a href=\"http://hentges.net/tmp/do_not_use/collie/cardfs/]http://hentges.net/tmp/do_not_use/collie/cardfs/[/url]

and the initrd.bin is in one of the hentges-*-image files, just like in any previous release.

dansawyer · « **Reply #22 on:** April 12, 2006, 10:31:37 am »

Thanks - It was the /tmp/do_not_use/ that did it.

I currently have an old cardfs image installed. That implies the SD directories exist and are in use. Will a re-install work with these?

How is an upgrade from a previous version performed?

Thanks again - Dan

CoreDump · « **Reply #23 on:** April 12, 2006, 12:12:31 pm »

Quote

Thanks - It was the /tmp/do_not_use/ that did it.

I currently have an old cardfs image installed. That implies the SD directories exist and are in use. Will a re-install work with these?

How is an upgrade from a previous version performed?

Thanks again - Dan
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122856\"][{POST_SNAPBACK}][/a][/div]

The cardfs installer will allow you to remove the old files.

reclusivemonkey · « **Reply #24 on:** April 12, 2006, 03:05:10 pm »

Hi CoreDump,

I'm not having much luck with the latest version either. When I flash, the lights only come on for about thirty seconds, then go out. When I reboot, I get the error message about the wrong kernel. It seems to find zImage fine, and flash that, but not initrd.bin.

dansawyer · « **Reply #25 on:** April 12, 2006, 10:47:42 pm »

Attempts to tar -zxvf hentges-opie-image-de-collie_T1-RC4-3.5.4.1-alpha2-collie.rootfs.ext2.gz
do nothing.

It unziped without error but ended up a 150 MB file.

Is this a tar file? Why does tar -zxvf not work?

Thanks - Dan

Storm · « **Reply #26 on:** April 12, 2006, 11:29:43 pm »

Quote

Attempts to tar -zxvf hentges-opie-image-de-collie_T1-RC4-3.5.4.1-alpha2-collie.rootfs.ext2.gz
do nothing.

It unziped without error but ended up a 150 MB file.

Is this a tar file? Why does tar -zxvf not work?

Thanks - Dan
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122941\"][{POST_SNAPBACK}][/a][/div]

Er, because its not a tar file. Its a gzipped ext2 image. Tarballs are usually denoted by either .tar.gz, .tgz or .tar.bz2 appended to the filename.

--Storm

CoreDump · « **Reply #27 on:** April 13, 2006, 03:19:05 am »

Quote

Hi CoreDump,

I'm not having much luck with the latest version either. When I flash, the lights only come on for about thirty seconds, then go out. When I reboot, I get the error message about the wrong kernel. It seems to find zImage fine, and flash that, but not initrd.bin.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122905\"][{POST_SNAPBACK}][/a][/div]

Well, check the naming of initrd.bin then

CoreDump · « **Reply #28 on:** April 13, 2006, 03:20:26 am »

Quote

Attempts to tar -zxvf hentges-opie-image-de-collie_T1-RC4-3.5.4.1-alpha2-collie.rootfs.ext2.gz
do nothing.

It unziped without error but ended up a 150 MB file.

Is this a tar file? Why does tar -zxvf not work?

Thanks - Dan
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

Please read the header text of the directory you got that file from:
[a href=\"http://hentges.net/tmp/do_not_use/collie/ext2/]http://hentges.net/tmp/do_not_use/collie/ext2/[/url]

It points to a FAQ which explains what an .ext2 file is and what it is good for.

veekoo · « **Reply #29 on:** April 13, 2006, 03:37:39 am »

Quote

Quote
Hi CoreDump,

I'm not having much luck with the latest version either. When I flash, the lights only come on for about thirty seconds, then go out. When I reboot, I get the error message about the wrong kernel. It seems to find zImage fine, and flash that, but not initrd.bin.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122905\"][{POST_SNAPBACK}][/a][/div]

Well, check the naming of initrd.bin then
[div align=\"right\"][a href=\"index.php?act=findpost&pid=122962\"][{POST_SNAPBACK}][/a][/div]

I have exactly same problems. I can easily flash OZ 3.5.4 distribution, but old-style hentges installation fails. Lights come on for 10 seconds, and that's it. I'm using zImage-collie-64-0-20060409201626.bin renamed as zImage and initrd.bin extracted from hentges-opie-image-de-collie_T1-RC4.tar.gz.

And yes, I have double-checked naming of initrd.bin.

Veekoo

News:

Author Topic: Hentges 3.5.4.1 For Collie (Read 38339 times)