← previous next →
Pages: [1] 2

Author Topic: Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100  (Read 5076 times)

WJMoore

  • Newbie
  • *
  • Posts: 25
    • View Profile
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« on: April 26, 2006, 07:32:56 am »
I just installed RC1 of 3.5.4.1 on my c3100, on top of alpha 2. The system boots ok but when it gets to starting OPIE in 5 seconds, it clears the screen and hangs with the cursor in the top left of the screen. If I press a key during the 5 second pause and prevent OPIE trying to start all seems well. Has anyone else has any success with this configuration? If no one has anything else to add I'll just file a bug, although I'm hesitant to do that given it seems like a problem only related to RC1 and there is no specific choice for this configuration in the bug tracker.
Logged
SL-C3100 - Cacko 1.23

Hrw

  • Hero Member
  • *****
  • Posts: 1366
    • View Profile
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« Reply #1 on: April 26, 2006, 08:02:55 am »
3.5.4.x is for all 3.5.4.x related (released, alpha, rc etc)

Strange thing... I booted OPIE on my c760 and it works.
Logged
OpenZaurus 3.5.4x Release Manager
OpenEmbedded, Ångström, Poky developer
My website

Misc embedded hardware.

WJMoore

  • Newbie
  • *
  • Posts: 25
    • View Profile
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« Reply #2 on: April 26, 2006, 08:17:18 am »
It actually doesn't seem to be a hardware lockup because if I press the power button the hard disk light flashes a few times but nothing happens. No other keys get a response. Is it possible to start opie manually from the command line and view any output or is there anything of relevance logged anywhere?
Logged
SL-C3100 - Cacko 1.23

Hrw

  • Hero Member
  • *****
  • Posts: 1366
    • View Profile
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« Reply #3 on: April 26, 2006, 09:05:00 am »
"/etc/init.d/opie start" is one way

the other is:

export QTDIR=/opt/QtPalmtop/
export OPIEDIR=/opt/QtPalmtop/
/opt/QtPalmtop/bin/qpe -nodaemon
Logged
OpenZaurus 3.5.4x Release Manager
OpenEmbedded, Ångström, Poky developer
My website

Misc embedded hardware.

WJMoore

  • Newbie
  • *
  • Posts: 25
    • View Profile
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« Reply #4 on: April 27, 2006, 06:12:03 am »
Ahh that was useful (did the latter). The following is the result of /opt/QtPalmtop/bin/qpe -nodaemon > log.txt 2>&1. Note that that the output from stdout has just ended up at the end of the file so I've included a pic of what it looks like on screen. Any thoughts on what might be causing the segfault?

Code: [Select]
ODevice() - found 'Hardware    : SHARP Borzoi'
Zaurus::init()
Zaurus::init() - Hinge Sensor Initialization successfully completed
Zaurus::rotation()
OInputSystem::OInputSystem()
OInputSystem::synchronize()
OInputSystem::synchronize() - checking if '/dev/input/event0' is a valid input system node... 'yes' [(ok)]
OInputDevice::OInputDevice( '/dev/input/event0' )
OInputSystem::synchronize() - checking if '/dev/input/event1' is a valid input system node... 'yes' [(ok)]
OInputDevice::OInputDevice( '/dev/input/event1' )
OInputSystem::synchronize() - checking if '/dev/input/event2' is a valid input system node... 'yes' [(ok)]
OInputDevice::OInputDevice( '/dev/input/event2' )
OInputSystem::synchronize() - checking if '/dev/input/uinput' is a valid input system node... 'no' [Invalid argument]
OInputSystem::synchronize() done
Zaurus::rotation() - hinge sensor = 0
Zaurus::rotation() - returning '3'
Zaurus::init() - Using the 2.6 OpenZaurus HAL on a Zaurus SL-C3100
Zaurus::rotation()
Zaurus::rotation() - hinge sensor = 0
Zaurus::rotation() - returning '3'
OGlobal::creating global configuration instance.
OConfig::OConfig()
: ODevice reports transformation to be 3
Zaurus::rotation()
Zaurus::rotation() - hinge sensor = 0
Zaurus::rotation() - returning '3'
: setting QWS_DISPLAY to 'Transformed:Rot270:0'
QWSApplication::qt_init() - current terminal specified.
Could not read calibration: /etc/pointercal
: adding a preferred keyboard filter handler
: libopie2 OResource: can't find image devicebuttons/z_hinge1
: libopie2 OResource: can't find image devicebuttons/z_hinge2
: libopie2 OResource: can't find image devicebuttons/z_hinge3
: DocumentList::DocumentList() : scanDocs = true
: WARNING: preferred keyboard is Multikey
: Setting up QCop to QPE/System
Segmentation fault.
Doing slow search for /opt/QtPalmtop/bin/qpe devicebuttons/z_hinge1
Doing slow search for /opt/QtPalmtop/bin/qpe devicebuttons/z_hinge2
Doing slow search for /opt/QtPalmtop/bin/qpe devicebuttons/z_hinge3
Doing slow search for /opt/QtPalmtop/bin/qpe launcher/firstuse
[img]http://www.wezm.net/forums/IMG_6603.jpg\" border=\"0\" class=\"linked-image\" /]
Logged
SL-C3100 - Cacko 1.23

T595

  • Newbie
  • *
  • Posts: 1
    • View Profile
    • http://
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« Reply #5 on: April 27, 2006, 09:08:23 am »
Same Problem & LOG on my Akita with OZ 3.5.4.1 RC1

Code: [Select]
ODevice() - found 'Hardware    : SHARP Akita'
Zaurus::init()
Zaurus::init() - Hinge Sensor Initialization successfully completed
Zaurus::rotation()
OInputSystem::OInputSystem()
OInputSystem::synchronize()
OInputSystem::synchronize() - checking if '/dev/input/event0' is a valid input system node... 'yes' [(ok)]
OInputDevice::OInputDevice( '/dev/input/event0' )
OInputSystem::synchronize() - checking if '/dev/input/event1' is a valid input system node... 'yes' [(ok)]
OInputDevice::OInputDevice( '/dev/input/event1' )
OInputSystem::synchronize() - checking if '/dev/input/event2' is a valid input system node... 'yes' [(ok)]
OInputDevice::OInputDevice( '/dev/input/event2' )
OInputSystem::synchronize() - checking if '/dev/input/uinput' is a valid input system node... 'no' [Invalid argument]
OInputSystem::synchronize() done
Zaurus::rotation() - hinge sensor = 0
Zaurus::rotation() - returning '3'
Zaurus::init() - Using the 2.6 OpenZaurus HAL on a Zaurus SL-C1000
Zaurus::rotation()
Zaurus::rotation() - hinge sensor = 0
Zaurus::rotation() - returning '3'
OGlobal::creating global configuration instance.
OConfig::OConfig()
: ODevice reports transformation to be 3
Zaurus::rotation()
Zaurus::rotation() - hinge sensor = 0
Zaurus::rotation() - returning '3'
: setting QWS_DISPLAY to 'Transformed:Rot270:0'
QWSApplication::qt_init() - current terminal specified.
Could not read calibration: /etc/pointercal
: adding a preferred keyboard filter handler
: libopie2 OResource: can't find image devicebuttons/z_hinge1
: libopie2 OResource: can't find image devicebuttons/z_hinge2
: libopie2 OResource: can't find image devicebuttons/z_hinge3
: DocumentList::DocumentList() : scanDocs = true
: WARNING: preferred keyboard is Multikey
: Setting up QCop to QPE/System
Segmentation fault.
Doing slow search for /opt/QtPalmtop/bin/qpe devicebuttons/z_hinge1
Doing slow search for /opt/QtPalmtop/bin/qpe devicebuttons/z_hinge2
Doing slow search for /opt/QtPalmtop/bin/qpe devicebuttons/z_hinge3
Doing slow search for /opt/QtPalmtop/bin/qpe launcher/firstuse
Logged
SL-C1000 - OZ 3.5.4.1 Alpha2 - DLink DCF-660W

WJMoore

  • Newbie
  • *
  • Posts: 25
    • View Profile
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« Reply #6 on: April 27, 2006, 09:41:55 am »
Ahh that's kind of good, means that it isn't just an issue with my Z.
Logged
SL-C3100 - Cacko 1.23

Tron

  • Newbie
  • *
  • Posts: 47
    • View Profile
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« Reply #7 on: April 27, 2006, 09:49:14 am »
Just to give a success note: I flashed the rc1-kernel on top of my alpha2-install (borzoi) and opie booted right up.
Logged
YT,
Tron

WJMoore

  • Newbie
  • *
  • Posts: 25
    • View Profile
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« Reply #8 on: April 27, 2006, 10:08:45 am »
Now that does complicate things since I did the exactly the same install. When you say kernel, I assume you did the hdimage as well (just double checking).
Logged
SL-C3100 - Cacko 1.23

daufoo

  • Newbie
  • *
  • Posts: 14
    • View Profile
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« Reply #9 on: April 28, 2006, 07:23:23 pm »
Same thing happened to my SL-C3200, it will not boot into OPIE.
Logged

wylbur

  • Newbie
  • *
  • Posts: 26
    • View Profile
    • http://
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« Reply #10 on: May 01, 2006, 01:48:54 am »
I can confirm the same problem with my terrier, and the same solution as Tron.
Logged
SL-C3200 running Cacko 1.23 (today, at least)
Hitachi 6G microdisk replaced with SanDisk 133x 4G CF
socketcom.com CF ethernet adapter
Ambicom WL1100C-CF WiFi
Corsair 1G SD card

WJMoore

  • Newbie
  • *
  • Posts: 25
    • View Profile
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« Reply #11 on: May 01, 2006, 04:00:54 am »
What solution would that be?
Logged
SL-C3100 - Cacko 1.23

Hrw

  • Hero Member
  • *****
  • Posts: 1366
    • View Profile
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« Reply #12 on: May 01, 2006, 05:22:36 am »
I rebuilt 3.5.4.1-rc during night - can provide images for testing (does not want to release RC without testing and I can't test it myself - no cxx00).
Logged
OpenZaurus 3.5.4x Release Manager
OpenEmbedded, Ångström, Poky developer
My website

Misc embedded hardware.

WJMoore

  • Newbie
  • *
  • Posts: 25
    • View Profile
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« Reply #13 on: May 01, 2006, 06:05:15 am »
I'm happy to try it out. PM me with a link or a request for my e-mail address.
Logged
SL-C3100 - Cacko 1.23

RuBeS

  • Jr. Member
  • **
  • Posts: 69
    • View Profile
Opie Hangs At Boot 3.5.4.1-rc1 On Sl-c3100
« Reply #14 on: May 01, 2006, 07:12:34 am »
Thanks HRW ! Can anyone bring me a link or send me in a tar compressed ? please !
Logged
Zaurus C3k (spitz)
Running: Cacko 1.23
Kernel: 2.4.20-custom (with hostap driver and tetsu patches)
Dev~: Doing gentoo usable in zaurus and adapting portage for daily use.
Pages: [1] 2
← previous next →