Author Topic: Installing To Sd - Double Slash Problem?  (Read 2190 times)

gepeto

  • Newbie
  • *
  • Posts: 28
    • View Profile
Installing To Sd - Double Slash Problem?
« on: May 03, 2006, 08:59:55 am »
So the setup is:

I have a SD card (2gig) in a c700. Had to put the latest rc of OZ to get the 2gig card working, works like a charm now!

Partition 1 = 64meg swap
Partition 2 = ext3, rest of the space, mounted in /media/card...

When I try to install a package in the package manager to a destiation I created and called "SD", pointing to /media/card, it downloads the package, installs it, but when trying to make the links, it fails, apparently because there is a double slash at the beginning of the path of the link..

Any idea ?

I haven't tried this in 3.5.4 as my 2gig card didn't seem to work...so I can't be 100% sure this is a release candidate bug, which is why I haven't posted in the main testing thread..

Thanks!

radioz

  • Full Member
  • ***
  • Posts: 102
    • View Profile
Installing To Sd - Double Slash Problem?
« Reply #1 on: May 03, 2006, 12:43:49 pm »
In 3.5.3 I had a similar problem with an SD card that had 2 partitions. The problem then was that the /etc/sdcontrol (I think; I don't have it in front of me) script was not very smart about which partition to use. I think it has to do with which partition is mounted to /media/card vs /media/card1.

Do a 'df' to see if both partitions got mounted. Maybe you could change ipkg.conf so that the 'SD' specifier pointed to the correct partition.

good luck,
radioz
5600 PXA-255
Hentges OZ 3.5.4.2
PQI 1G SD
PQI 256M SD
Socket LP 10/100 Ethernet
Ambicom WL1100C Wifi

gepeto

  • Newbie
  • *
  • Posts: 28
    • View Profile
Installing To Sd - Double Slash Problem?
« Reply #2 on: May 03, 2006, 01:27:44 pm »
Quote
In 3.5.3 I had a similar problem with an SD card that had 2 partitions. The problem then was that the /etc/sdcontrol (I think; I don't have it in front of me) script was not very smart about which partition to use. I think it has to do with which partition is mounted to /media/card vs /media/card1.

Do a 'df' to see if both partitions got mounted. Maybe you could change ipkg.conf so that the 'SD' specifier pointed to the correct partition.

good luck,
radioz
[div align=\"right\"][a href=\"index.php?act=findpost&pid=125574\"][{POST_SNAPBACK}][/a][/div]

Partitions are mounted and files get installed properly...

In ipkg.conf I have
dest SD /media/card

(which is the right place where I want the stuff to be )

I do not have a sdcontrol file in etc..

I have no means of transferring the log file at work (Wifi not fully setup yet) but basically it goes like...Downloading file...configuring package...2nd package...then

Linking packages installed in : SD

Error linking /media/card/opt/QtPalmtop/blablabla to "//opt"QtPalmtop...blah"

I think the problem is the "//" before opt ?