Author Topic: Install Oz To Internal Cf Card? (Read 4767 times)

evade · « **on:** July 07, 2006, 02:01:32 pm »

I have an 8gb CF card installed internally in my Zaurus SL-C3100 and have been unable to install OZ successfully onto my Z. I installed rc2 before I replaced the microdrive.

The install process seems to go fine: Formating, extracting, reboot.

After that I get the OZ logo and below it: "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)"

Is something in the kernel looking at the drive's ident? What can I change in the tarball?

Hrw · « **Reply #1 on:** July 08, 2006, 04:52:45 pm »

Anyone who EXCHANGED internal microdrive with OTHER storage card NEED to provide 'cardctl ident' output to us so we could add it into ide-cs so kernel will know that yout 'umbaumba' cf card is ide.

evade · « **Reply #2 on:** July 09, 2006, 11:17:03 am »

My Ridata 8GB Pro 150X Compact Flash Card provides the following cardctl ident:

Socket 1:
product info: "SMI VENDOR", "SMI PRODUCT", ""
manfid: 0x000a, 0x0000
function: 4 (fixed disk)

Should this be a bug report?

All that has to be rebuilt is the kernel, correct?

I don't want my flash card to be mounted with a journal. After the install will changing fstab be enough to make the partition mount as ext2?

Hrw · « **Reply #3 on:** July 10, 2006, 06:15:51 pm »

added proper patch into kernel - will rebuild them and replace OZ 3.5.4.1 ones with it.

evade · « **Reply #4 on:** July 10, 2006, 06:37:44 pm »

Thank you very much.

Please let me know when to re-download.

Hrw · « **Reply #5 on:** July 11, 2006, 05:06:35 am »

http://ewi546.ewi.utwente.nl/mirror/www.op...ges/spitz/misc/ contain zImage.bin for you - check and confirm does it work.

evade · « **Reply #6 on:** July 11, 2006, 09:28:15 am »

It works.

Again, thank you. You do your users a great service by developing and supporting!

evade · « **Reply #7 on:** July 11, 2006, 11:42:57 am »

I am now trying to remove the journal on /dev/hda1 making it ext2 not ext3. But I cannot remount / readonly even when booted without a gui.

Does this have something to do with the pivot_root?

What can I do?

ikl · « **Reply #8 on:** July 16, 2006, 07:16:13 am »

Quote

http://ewi546.ewi.utwente.nl/mirror/www.op...ges/spitz/misc/ contain zImage.bin for you - check and confirm does it work.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=134655\"][{POST_SNAPBACK}][/a][/div]

Hrw,
my internal CF returns the following info :
product info: "M-Systems", "CF500", ""
manfid: 0x000a, 0x0000
function: 4 (fixed disk)

I would have thought that your updated kernel (above) would have worked, given it's the same manfidm but I get the same error as before. Any chance you could have a look?

Thanks very much!

I.

News:

Author Topic: Install Oz To Internal Cf Card? (Read 4767 times)