Failed To Install Cacko 1.23 On Sl-7500c

[wrc4]

(I tried to post this in the pdaXrom forum because I thought this has something to do with flashing to pdaXrom, but then I realize it's a general problem on my SL-7500C)

The original post can be found here:
https://www.oesf.org/forums/index.php?showt...&st=0&p=134497&

Here is a simplified version:

I have problem flashing my SL-7500C to Cacko 1.23 from any other ROMs (including the SHARP ROM that comes with the Zaurus). The ROM I'm using is SL-C750-Qtopia-1.23-1029311005.zip

I carefully followed the steps in Cacko's release note: Enter OK mode; resize root (tried 32, 40 and 46); Re-enter OK mode, choose Upgrade. The process succeeded without any problem. But after I flipped the battery and rebooted, my Z was still booting the old system BEFORE flashing! (Of cause with a lot of files broken and end up with a dead system)

I tried to flash from a working SHARP ROM, pdaXrom and OZ/GPE ROM environment, but the results were same.

Has anyone tried Cacko 1.23 on 7500 and perhaps know what the problem is?

[Meanie]

(I tried to post this in the pdaXrom forum because I thought this has something to do with flashing to pdaXrom, but then I realize it's a general problem on my SL-7500C)

The original post can be found here:
https://www.oesf.org/forums/index.php?showt...&st=0&p=134497&

Here is a simplified version:

I have problem flashing my SL-7500C to Cacko 1.23 from any other ROMs (including the SHARP ROM that comes with the Zaurus). The ROM I'm using is SL-C750-Qtopia-1.23-1029311005.zip

I carefully followed the steps in Cacko's release note: Enter OK mode; resize root (tried 32, 40 and 46); Re-enter OK mode, choose Upgrade. The process succeeded without any problem. But after I flipped the battery and rebooted, my Z was still booting the old system BEFORE flashing! (Of cause with a lot of files broken and end up with a dead system)

I tried to flash from a working SHARP ROM, pdaXrom and OZ/GPE ROM environment, but the results were same.

Has anyone tried Cacko 1.23 on 7500 and perhaps know what the problem is?

you might have better luck asking on http://forum.zaurus.cn since there would be a greater chance of people having a 7500C over there

[wrc4]

(I tried to post this in the pdaXrom forum because I thought this has something to do with flashing to pdaXrom, but then I realize it's a general problem on my SL-7500C)

The original post can be found here:
https://www.oesf.org/forums/index.php?showt...&st=0&p=134497&

Here is a simplified version:

I have problem flashing my SL-7500C to Cacko 1.23 from any other ROMs (including the SHARP ROM that comes with the Zaurus). The ROM I'm using is SL-C750-Qtopia-1.23-1029311005.zip

I carefully followed the steps in Cacko's release note: Enter OK mode; resize root (tried 32, 40 and 46); Re-enter OK mode, choose Upgrade. The process succeeded without any problem. But after I flipped the battery and rebooted, my Z was still booting the old system BEFORE flashing! (Of cause with a lot of files broken and end up with a dead system)

I tried to flash from a working SHARP ROM, pdaXrom and OZ/GPE ROM environment, but the results were same.

Has anyone tried Cacko 1.23 on 7500 and perhaps know what the problem is?

you might have better luck asking on http://forum.zaurus.cn since there would be a greater chance of people having a 7500C over there

Thanks for the hint!