← previous next →
Pages: 1 ... 3 4 [5] 6 7 ... 11

Author Topic: Lots Of Questions...  (Read 44456 times)

nilch

  • Hero Member
  • *****
  • Posts: 668
    • View Profile
    • http://
Lots Of Questions...
« Reply #60 on: October 03, 2006, 12:21:21 pm »
Quote
I was hoping to install some camera software so I could connect my camera to the Zaurus while we are visiting family this weekend. 

But, I won't be able to get a SD card by then. 

Is there another way to get files back and forth without using internet?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=142952\"][{POST_SNAPBACK}][/a][/div]
Yes only the SD card (formatted at FAT) and CF acrd will show up as storage when you change PC LInk to storage mode. The internal flash does not show as storage on Windows.

The ony 2 other ways would be
1) get a Mini USB cable which accepts USB for the Zaurus and then you can plug in a USB stick (if you have one) and move files to/from the Zaurus and Windows computer

2) Load the Zaurus desktop software (there are version compatibility issues and it works only with Sharp ROM maybe) and then internal flash can be accessed also thru the Desktop software to transfer files. Of course you need to install drivers first.
(But it seems this method is not working for you because of driver issues)
« Last Edit: October 03, 2006, 12:25:16 pm by nilch »
Logged
New no more-C1000 / 5000D (sold my 6000 and 750) | Cacko ROM 1.23 on C1000 | 256 MB CF | 2GB PNY SD card | Socket Networker WiFi CF Card | USB Host cable from StreamlineCPUS | Mini Microphone (for voice recording) |

fishcube

  • Jr. Member
  • **
  • Posts: 95
    • View Profile
    • http://www.pbase.com/fishcube/sharpzaurus
Lots Of Questions...
« Reply #61 on: October 03, 2006, 12:41:38 pm »
Formatted at FAT?   Will the usb host cable work to hook zaurus to usb stick?

---

Ok, I ordered a 1GB SD card from Outpost.com and will get it tomorrow.  I hope I can now transfer files back and forth.
« Last Edit: October 03, 2006, 01:06:55 pm by fishcube »
Logged
SK
---
W: Sony UX50

nilch

  • Hero Member
  • *****
  • Posts: 668
    • View Profile
    • http://
Lots Of Questions...
« Reply #62 on: October 03, 2006, 01:05:35 pm »
Quote
Formatted at FAT?   Will the usb host cable work to hook zaurus to usb stick?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=142959\"][{POST_SNAPBACK}][/a][/div]

I meant formatted as FAT (not ext3).

Of cousre the Zaurus will mount most USB sticks via the USB host cable.
I do that all the time, where most big files ar on my USB stick (and not on the CF or SD).

But with USB stick, you have to mount the USB stick explicitly. It wont be auto-detected and mounted like a CF or SD card on the zaurus.

Pretty simple really
first make a directory for the USB stick to show up as
mkdir /mnt/usbstick

then mount as
mount -t vfat /dev/sdaX  /mnt/usbstick


Edit : Sorry, just tried on my Zaurus with my Memorex 1 GB stick, and on Cacko ROM, it DOES auto-mount. I dont need to mount is with commandas as I suggested.
Don't know about Sharp ROM though. (its been a long time back since I used Sharp ROM).
« Last Edit: October 03, 2006, 01:08:20 pm by nilch »
Logged
New no more-C1000 / 5000D (sold my 6000 and 750) | Cacko ROM 1.23 on C1000 | 256 MB CF | 2GB PNY SD card | Socket Networker WiFi CF Card | USB Host cable from StreamlineCPUS | Mini Microphone (for voice recording) |

fishcube

  • Jr. Member
  • **
  • Posts: 95
    • View Profile
    • http://www.pbase.com/fishcube/sharpzaurus
Lots Of Questions...
« Reply #63 on: October 03, 2006, 01:08:39 pm »
I don't know how to format as FAT?   I ordered a 1GB SD card from outpost.com.

---

Can I move files onto SD card while its in PC, then take it directly and place in Zaurus and have it read the files correctly?   Is it any different then using PC link?
« Last Edit: October 03, 2006, 01:14:26 pm by fishcube »
Logged
SK
---
W: Sony UX50

harvell

  • Full Member
  • ***
  • Posts: 241
    • View Profile
    • http://
Lots Of Questions...
« Reply #64 on: October 03, 2006, 01:23:31 pm »
Seriously Fishcube look at the connectivity part of the wiki.  It gives step by step instructions on how to do TCP/IP over USB.  When you connect the Zaurus to the PC the pc will treat the usb connection as a network adapter.  If you give this adapter an ip address of 192.168.129.2 then you will get connectivity to the Z.  With that you can browse to the z through your pc by going to start>run> type in "\\192.168.1.201\"

This will allow you to browse the Z through samba.  As well as ssh, VNC, KO/PI syncing, and more.  The wiki is all knowing..... the wiki is very powerful..... the wiki will make you happy..... the wiki......wiiiiikkkiiiiiiii.  

https://www.oesf.org
Logged
C1000 w/...  Cacko Lite (When I use the Z alot for business)... pdaXrom (when I see something cool and want to try it.  Best way for me to learn shell commands)
Eee PC for Mrs. Harvell  
4G SD

fishcube

  • Jr. Member
  • **
  • Posts: 95
    • View Profile
    • http://www.pbase.com/fishcube/sharpzaurus
Lots Of Questions...
« Reply #65 on: October 03, 2006, 01:29:55 pm »
I don't know anything about linux or the Run commands.  or Samba etc.

I need simple way to connect to PC.  Looks like going through SD card will be the simplest.
Logged
SK
---
W: Sony UX50

harvell

  • Full Member
  • ***
  • Posts: 241
    • View Profile
    • http://
Lots Of Questions...
« Reply #66 on: October 03, 2006, 01:53:42 pm »
Quote
I don't know anything about linux or the Run commands.  or Samba etc.

I need simple way to connect to PC.  Looks like going through SD card will be the simplest.
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]


I know I was in the same boat a couple of years ago  .  But this way is actually more simple than what you are trying right now.  Do the steps on this link

[a href=\"https://www.oesf.org/index.php?title=Network_connection_for_Windows]https://www.oesf.org/index.php?title=Networ...ion_for_Windows[/url]

(half you already done with loading the drivers)

Then on your windows pc go to start on the lower left corner >  go to "run"> then type in the IP address to browse "\\192.168.129.201\."   The concepts here are networking basics and will actually help you with basic concepts of TCP/IP.  Have fun....  
Logged
C1000 w/...  Cacko Lite (When I use the Z alot for business)... pdaXrom (when I see something cool and want to try it.  Best way for me to learn shell commands)
Eee PC for Mrs. Harvell  
4G SD

fishcube

  • Jr. Member
  • **
  • Posts: 95
    • View Profile
    • http://www.pbase.com/fishcube/sharpzaurus
Lots Of Questions...
« Reply #67 on: October 03, 2006, 02:14:18 pm »
Quote
Quote
I don't know anything about linux or the Run commands.  or Samba etc.

I need simple way to connect to PC.  Looks like going through SD card will be the simplest.
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]


I know I was in the same boat a couple of years ago  .  But this way is actually more simple than what you are trying right now.  Do the steps on this link

[a href=\"https://www.oesf.org/index.php?title=Network_connection_for_Windows]https://www.oesf.org/index.php?title=Networ...ion_for_Windows[/url]

(half you already done with loading the drivers)

Then on your windows pc go to start on the lower left corner >  go to "run"> then type in the IP address to browse "\\192.168.129.201\."   The concepts here are networking basics and will actually help you with basic concepts of TCP/IP.  Have fun....  
[div align=\"right\"][a href=\"index.php?act=findpost&pid=142976\"][{POST_SNAPBACK}][/a][/div]

When I click on PC start/run, I get box that says to browse drives/files??   IT asks for me to type the name of file/program/documents and windows will open for you.
« Last Edit: October 03, 2006, 02:28:20 pm by fishcube »
Logged
SK
---
W: Sony UX50

harvell

  • Full Member
  • ***
  • Posts: 241
    • View Profile
    • http://
Lots Of Questions...
« Reply #68 on: October 03, 2006, 02:19:21 pm »
in that window type in the ip address of the Z.  Should be
\\192.168.129.201\
Logged
C1000 w/...  Cacko Lite (When I use the Z alot for business)... pdaXrom (when I see something cool and want to try it.  Best way for me to learn shell commands)
Eee PC for Mrs. Harvell  
4G SD

harvell

  • Full Member
  • ***
  • Posts: 241
    • View Profile
    • http://
Lots Of Questions...
« Reply #69 on: October 03, 2006, 02:19:46 pm »
make sure to type in the backslahes
Logged
C1000 w/...  Cacko Lite (When I use the Z alot for business)... pdaXrom (when I see something cool and want to try it.  Best way for me to learn shell commands)
Eee PC for Mrs. Harvell  
4G SD

fishcube

  • Jr. Member
  • **
  • Posts: 95
    • View Profile
    • http://www.pbase.com/fishcube/sharpzaurus
Lots Of Questions...
« Reply #70 on: October 03, 2006, 02:22:57 pm »
Says, network path was not found ??
Logged
SK
---
W: Sony UX50

fishcube

  • Jr. Member
  • **
  • Posts: 95
    • View Profile
    • http://www.pbase.com/fishcube/sharpzaurus
Lots Of Questions...
« Reply #71 on: October 03, 2006, 02:31:43 pm »
about drivers, do I need serial or Network?  I'm back to WDM serial I believe.  I need to get the NDIS one back.  Not sure how to?

I take it I need network.  But, for some reason I can only find SL series Ver3 (WDM) ??

This is what it searches for when I plug in the Zaurus to PC.
« Last Edit: October 03, 2006, 02:56:33 pm by fishcube »
Logged
SK
---
W: Sony UX50

fishcube

  • Jr. Member
  • **
  • Posts: 95
    • View Profile
    • http://www.pbase.com/fishcube/sharpzaurus
Lots Of Questions...
« Reply #72 on: October 03, 2006, 03:00:05 pm »
Ok, think Ive got the NDIS network installed.  and will try the Run path again.
-----

It works!!!  thx so much.  I've got photos on there now, and also put some software on there.  Will try and install them soon.
« Last Edit: October 03, 2006, 03:25:47 pm by fishcube »
Logged
SK
---
W: Sony UX50

fishcube

  • Jr. Member
  • **
  • Posts: 95
    • View Profile
    • http://www.pbase.com/fishcube/sharpzaurus
Lots Of Questions...
« Reply #73 on: October 03, 2006, 03:32:39 pm »
I've got some music files that are in .cda format.  How do I get them in mp3 format or wma?  so I can transfer to Zaurus?

---

How do I check memory space used and available on the C1000?

---

Can I move icons?  or remove icons from main screen?
« Last Edit: October 03, 2006, 03:43:49 pm by fishcube »
Logged
SK
---
W: Sony UX50

InSearchOf

  • Administrator
  • Hero Member
  • *****
  • Posts: 1144
    • View Profile
    • http://
Lots Of Questions...
« Reply #74 on: October 03, 2006, 03:43:48 pm »
ROM "Disk" Space
# df -h

RAM "Memory"
# free

Late
Logged
Sharp Zaurus SL-C3100 and SL-6000L
pdaXrom Developer
Please visit pdaXrom.org for updates
My Blog
IRC #pdaxrom @ FreeNode
Pages: 1 ... 3 4 [5] 6 7 ... 11
← previous next →