← previous next →
Pages: [1] 2

Author Topic: Removing Pdaxrom  (Read 6045 times)

zbeckerd

  • Newbie
  • *
  • Posts: 27
    • View Profile
    • http://beckerconsulting.net
Removing Pdaxrom
« on: November 29, 2006, 12:51:20 pm »
Just bought a C1000 on ebay and it has pdaXrom installed (Kathrin).  I wanted to look at putting it back to the origional state, but cannot get pdaXrom to stop.  

Used the standard shutdown now -h, Removed battery, hit reset, and no matter what when I put the battery back in it starts booting into pdaXrom.  
The power button sends it into suspend, but not shutdown.  
"Shutdown now -h" powers down the system, but it reboots in about 3 seconds.

Anyone else experienced this and found a solution?


PS. As a side note I downloaded the pdaXrom Live X86.iso to learn more about pdaXrom on my laptop.  I had the same problem getting it to quit.  Had to hold the power button down and when I started back up had some HD corruption... interesting
Logged
SL-5500 Sharp 3.10  SL-C1000 zubuntu jaunty
Zonet WF
Haicom CF 303 GPS
Treo 680 - UTC 6700

InSearchOf

  • Administrator
  • Hero Member
  • *****
  • Posts: 1144
    • View Profile
    • http://
Removing Pdaxrom
« Reply #1 on: November 29, 2006, 02:08:20 pm »
Wait wait wait... you want the Orignal Sharp Rom (Factory) to boot?

There is no Hard encoded version of the Sharp rom that can be restored by taking battery out... the ROM inside of the Z is non-volatile... meaning it doesnt need a charge to retain its data...

To accomplish what you are looking to do you will need a CF or SD card... let me know first if you have one of these before I go on ranting about how to go about doing a NAND restore :-)

Late
« Last Edit: November 29, 2006, 02:08:57 pm by InSearchOf »
Logged
Sharp Zaurus SL-C3100 and SL-6000L
pdaXrom Developer
Please visit pdaXrom.org for updates
My Blog
IRC #pdaxrom @ FreeNode

Cresho

  • Hero Member
  • *****
  • Posts: 1609
    • View Profile
    • http://home.earthlink.net/~cresho/
Removing Pdaxrom
« Reply #2 on: November 29, 2006, 03:00:05 pm »
yup..exactly.  get an sd or cf preferably 1gb
Logged
Zaurus C-3200 (internal 8gb seagate drive) with buuf icon theme, cacko 1.23 full,  and also Meanie's pdaxqtrom-Debian/Open Office
Zaurus SL-5500 Sharp Rom 3.13 with steel theme
pretec pocket pc wi fi
ambicom bt2000-cf bluetooth-made in taiwan
simpletech 1gb cf
pny 1gb sd
patriot 2gb
ocz or patriot 4gb sd(failed after 2 weeks)only on z
creative csw-5300 speakers in stereo
DigiLife DDV-1000 for video, Audio, Picture recording playable on the zaurus
Mustek DV4500-video recorder, pictures, voice record on sd for z

zaurusthemes.biz | ZaurusVideo | Zaurus Software

zbeckerd

  • Newbie
  • *
  • Posts: 27
    • View Profile
    • http://beckerconsulting.net
Removing Pdaxrom
« Reply #3 on: November 29, 2006, 03:23:06 pm »
I think I understand...
I do know how to do a Nand Restore.  What I was attempting was to load Cacko which I had on my SD card.  I also thought about re-loading pdaXrom as the one that came loaded had some broken parts ( usb tool).  But as I cannot get pdaXrom to completely shutdown I can see now that Nand Restore is my only option.

I have the file "c1000-2005-03-24-16-00.zip" and a 1 gig SD card.  And the directions from the TriSoft Quickstart guide.

I basically wanted to see how everything works stock as to get my networking stuff to work I had to test everything through the shell and never did get online (my last hangup is it did not like my wep key in the wlan0.up script.  Just want to play with my new toy without doing everything from the shell.

Thanks for you quick response... and help.
Logged
SL-5500 Sharp 3.10  SL-C1000 zubuntu jaunty
Zonet WF
Haicom CF 303 GPS
Treo 680 - UTC 6700

Capn_Fish

  • Hero Member
  • *****
  • Posts: 2342
    • View Profile
    • http://
Removing Pdaxrom
« Reply #4 on: November 29, 2006, 04:42:43 pm »
Quote
I think I understand...
I do know how to do a Nand Restore.  What I was attempting was to load Cacko which I had on my SD card.  I also thought about re-loading pdaXrom as the one that came loaded had some broken parts ( usb tool).  But as I cannot get pdaXrom to completely shutdown I can see now that Nand Restore is my only option.

I have the file "c1000-2005-03-24-16-00.zip" and a 1 gig SD card.  And the directions from the TriSoft Quickstart guide.

I basically wanted to see how everything works stock as to get my networking stuff to work I had to test everything through the shell and never did get online (my last hangup is it did not like my wep key in the wlan0.up script.  Just want to play with my new toy without doing everything from the shell.

Thanks for you quick response... and help.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=147536\"][{POST_SNAPBACK}][/a][/div]

If you like pdaXrom, I'd recommend trying Beta 3 instead of r121, as it works much better out of the box. The GUI networking and other config stuff works in Beta 3 as well.

You may want to note that in order to do the restore you probably need to rename the backup file SYSC100.dbk.
Logged
SL-C750- pdaXrom beta 1 (mostly unused)
Current distro: Gentoo

InSearchOf

  • Administrator
  • Hero Member
  • *****
  • Posts: 1144
    • View Profile
    • http://
Removing Pdaxrom
« Reply #5 on: November 29, 2006, 04:59:15 pm »
Quote
You may want to note that in order to do the restore you probably need to rename the backup file SYSC100.dbk.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=147545\"][{POST_SNAPBACK}][/a][/div]

If you have to rename the file you may have the wrong Nand for a different device...

Conics and TriSoft have the correct filename when the zip is extracted

But like Capn said... if you want to start off with pdaxrom and get your feet wet... try beta3 first

Late
Logged
Sharp Zaurus SL-C3100 and SL-6000L
pdaXrom Developer
Please visit pdaXrom.org for updates
My Blog
IRC #pdaxrom @ FreeNode

Capn_Fish

  • Hero Member
  • *****
  • Posts: 2342
    • View Profile
    • http://
Removing Pdaxrom
« Reply #6 on: November 29, 2006, 05:15:39 pm »
Quote
Quote
You may want to note that in order to do the restore you probably need to rename the backup file SYSC100.dbk.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=147545\"][{POST_SNAPBACK}][/a][/div]

If you have to rename the file you may have the wrong Nand for a different device...

Conics and TriSoft have the correct filename when the zip is extracted

But like Capn said... if you want to start off with pdaxrom and get your feet wet... try beta3 first

Late
[div align=\"right\"][a href=\"index.php?act=findpost&pid=147548\"][{POST_SNAPBACK}][/a][/div]

Oops...I thought the .zip was .dbk!  
Logged
SL-C750- pdaXrom beta 1 (mostly unused)
Current distro: Gentoo

zbeckerd

  • Newbie
  • *
  • Posts: 27
    • View Profile
    • http://beckerconsulting.net
Removing Pdaxrom
« Reply #7 on: November 29, 2006, 06:20:44 pm »
Quote from: Capn_Fish,Nov 29 2006, 09:42 PM

If you like pdaXrom, I'd recommend trying Beta 3 instead of r121, as it works much better out of the box. The GUI networking and other config stuff works in Beta 3 as well.

Ok all,
I have downloaded the 1.1.0beta3...
Everything is there, however I am not sure about uBoot.  I did not find it on the pdaX org site.   Did find Das U-boot-1.1.6. source on sourceforge.  Where is this hiding?

Thanks
Logged
SL-5500 Sharp 3.10  SL-C1000 zubuntu jaunty
Zonet WF
Haicom CF 303 GPS
Treo 680 - UTC 6700

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Removing Pdaxrom
« Reply #8 on: November 29, 2006, 06:29:13 pm »
Quote from: zbeckerd,Nov 30 2006, 09:20 AM
Quote from: Capn_Fish,Nov 29 2006, 09:42 PM

If you like pdaXrom, I'd recommend trying Beta 3 instead of r121, as it works much better out of the box. The GUI networking and other config stuff works in Beta 3 as well.

Ok all,
I have downloaded the 1.1.0beta3...
Everything is there, however I am not sure about uBoot.  I did not find it on the pdaX org site.   Did find Das U-boot-1.1.6. source on sourceforge.  Where is this hiding?

Thanks
[div align=\"right\"][a href=\"index.php?act=findpost&pid=147552\"][{POST_SNAPBACK}][/a][/div]

no u-boot hassle required for beta3
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

InSearchOf

  • Administrator
  • Hero Member
  • *****
  • Posts: 1144
    • View Profile
    • http://
Removing Pdaxrom
« Reply #9 on: November 29, 2006, 07:25:01 pm »
Quote
no u-boot hassle required for beta3
[div align=\"right\"][a href=\"index.php?act=findpost&pid=147554\"][{POST_SNAPBACK}][/a][/div]

Hassle??? U-Boot is like the coolest thing since sliced bread... :-)

Yea like Meanie said, Beta3 utilizes the factory Sharp boot loader

Late
Logged
Sharp Zaurus SL-C3100 and SL-6000L
pdaXrom Developer
Please visit pdaXrom.org for updates
My Blog
IRC #pdaxrom @ FreeNode

Capn_Fish

  • Hero Member
  • *****
  • Posts: 2342
    • View Profile
    • http://
Removing Pdaxrom
« Reply #10 on: November 29, 2006, 07:40:58 pm »
Quote
Quote
no u-boot hassle required for beta3
[div align=\"right\"][a href=\"index.php?act=findpost&pid=147554\"][{POST_SNAPBACK}][/a][/div]

Hassle??? U-Boot is like the coolest thing since sliced bread... :-)

Yea like Meanie said, Beta3 utilizes the factory Sharp boot loader

Late
[div align=\"right\"][a href=\"index.php?act=findpost&pid=147559\"][{POST_SNAPBACK}][/a][/div]

I would assume that the "hassle" is installing, as people seem to have had trouble with it. I have had no problems with it myself, however.
Logged
SL-C750- pdaXrom beta 1 (mostly unused)
Current distro: Gentoo

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Removing Pdaxrom
« Reply #11 on: November 29, 2006, 07:58:59 pm »
Quote
Quote
Quote
no u-boot hassle required for beta3
[div align=\"right\"][a href=\"index.php?act=findpost&pid=147554\"][{POST_SNAPBACK}][/a][/div]

Hassle??? U-Boot is like the coolest thing since sliced bread... :-)

Yea like Meanie said, Beta3 utilizes the factory Sharp boot loader

Late
[div align=\"right\"][a href=\"index.php?act=findpost&pid=147559\"][{POST_SNAPBACK}][/a][/div]

I would assume that the "hassle" is installing, as people seem to have had trouble with it. I have had no problems with it myself, however.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=147560\"][{POST_SNAPBACK}][/a][/div]

try to install it on a C3000
anyway, I do intend to make it work on the C3000 eventually and whack kexec into it as well somewhere along the lines.... so I will be able to dual boot beta3 (stable system) and r121 (beta testing and dev)
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

InSearchOf

  • Administrator
  • Hero Member
  • *****
  • Posts: 1144
    • View Profile
    • http://
Removing Pdaxrom
« Reply #12 on: November 29, 2006, 08:05:09 pm »
Quote
try to install it on a C3000
anyway, I do intend to make it work on the C3000 eventually and whack kexec into it as well somewhere along the lines.... so I will be able to dual boot beta3 (stable system) and r121 (beta testing and dev)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=147562\"][{POST_SNAPBACK}][/a][/div]

Thats the spirit Meanie!

Late
Logged
Sharp Zaurus SL-C3100 and SL-6000L
pdaXrom Developer
Please visit pdaXrom.org for updates
My Blog
IRC #pdaxrom @ FreeNode

zbeckerd

  • Newbie
  • *
  • Posts: 27
    • View Profile
    • http://beckerconsulting.net
Removing Pdaxrom
« Reply #13 on: November 30, 2006, 11:20:40 am »
Well, back to the beginning.
How does one get pdaXrom to shutdown completely.

I loaded the beta3 files on a fat format sd card

The OK key has no effect on the startup. pdaXrom boots

I left the battery out all night, the moment I put the battery in pdaXrom starts booting.

Things I have tried...
Hold the C+D before putting the battery in- this gives me a blinking power light and nothing else seems to happen no matter what button or key I hold down

Hold the Fn and C+D before putting the battery in- pdaXrom does not boot, but nothing else seems to happen, no matter what button or key.  It just does not power up until I hard reset and then pdaXrom boots before I can even turn the Z over.

I not sure if I can even nand restore, but that may be the next attempt.

Ideas?
Logged
SL-5500 Sharp 3.10  SL-C1000 zubuntu jaunty
Zonet WF
Haicom CF 303 GPS
Treo 680 - UTC 6700

InSearchOf

  • Administrator
  • Hero Member
  • *****
  • Posts: 1144
    • View Profile
    • http://
Removing Pdaxrom
« Reply #14 on: November 30, 2006, 11:33:50 am »
ok... do this... hold down OK... put the battery in...

If that doesnt work... boot into pdaxrom... do a reboot... but hold down ok once it says rebooting... it will prolly start scrolling a whole bunch of repeating characters... ignore it... then the screen goes black it will bring up the maintance menu...

Late
Logged
Sharp Zaurus SL-C3100 and SL-6000L
pdaXrom Developer
Please visit pdaXrom.org for updates
My Blog
IRC #pdaxrom @ FreeNode
Pages: [1] 2
← previous next →