← previous next →
Pages: [1]

Author Topic: Boot Problems?  (Read 11901 times)

A5DF

  • Jr. Member
  • **
  • Posts: 53
    • View Profile
    • http://
Boot Problems?
« on: June 08, 2007, 06:44:10 pm »
Hi guys, it's been a long time since I was on here last. Sharprom, to OZ, and now to OpenBSD/zaurus.

When I installed I went the [d] method since OZ didn't like the module under 2.6. I'm an old hand with installing OpenBSD, no surprises here. After first boot I still seem to have the OZ startup screen, and it kernel panics?

How did I boot you ask? [d] method again, insmod zbsdmod.o, and this time I "cp bsd > /proc/zboot", so obviously I want to fix the boot so I don't need to do this any longer. How?

Thanks for the help guys, and it's nice to be back.
Logged

jpmatrix

  • Hero Member
  • *****
  • Posts: 1014
    • View Profile
    • http://matrixmen.free.fr
Boot Problems?
« Reply #1 on: June 09, 2007, 03:00:22 am »
Quote
Hi guys, it's been a long time since I was on here last. Sharprom, to OZ, and now to OpenBSD/zaurus.

When I installed I went the [d] method since OZ didn't like the module under 2.6. I'm an old hand with installing OpenBSD, no surprises here. After first boot I still seem to have the OZ startup screen, and it kernel panics?

How did I boot you ask? [d] method again, insmod zbsdmod.o, and this time I "cp bsd > /proc/zboot", so obviously I want to fix the boot so I don't need to do this any longer. How?

Thanks for the help guys, and it's nice to be back.
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

what is your zaurus?
anyway, have a look here [a href=\"http://exit3.i-55.com/~xikon/openbsdzaurus.html]http://exit3.i-55.com/~xikon/openbsdzaurus.html[/url]
and try to follow the full install instructions :
http://exit3.i-55.com/%7Exikon/openbsdfullinstall.tar.gz
Logged
**Fujitsu U1010 !!!  
**ex-Zaurus SL-C3000 owner with Debian kernel 2.6.24-yonggun

A5DF

  • Jr. Member
  • **
  • Posts: 53
    • View Profile
    • http://
Boot Problems?
« Reply #2 on: June 09, 2007, 11:30:57 am »
SL-3100, been there, but I'll reread everything.

update:

Nope, and I still have OZ's boot screen? No OpenBSD boot up? It did something it seems very low profile that needs to be undone?
« Last Edit: June 09, 2007, 11:54:59 am by A5DF »
Logged

ZDevil

  • Hero Member
  • *****
  • Posts: 1998
    • View Profile
    • http://
Boot Problems?
« Reply #3 on: June 09, 2007, 10:14:53 pm »
I guess it is necessary to flash back to Sharp rom first and then install OBSD either using the openbsd bootloader installer ipk, or copying the files manually following the instructions PDF in openbsdfullinstall.tar.gz (but it seems the last step of copying the config file is no longer necessary.).
Logged

Life is too precious for hacking *too much*
Visit my Z screencap gallery[/color]
My EeePC 701 Black = Debian (Lenny) on IceRocks + Transcend SDHC Class6 8GB + 2GB RAM
My Zaurus SL-C3200 = Debian EABI (kernel 2.6.24.3-yonggun) on a swapped internal Sandisk Extreme III CF 16gb
My Debian EABI feed: http://matrixmen.free.fr/zaurus/debian/
My OpenBSD/Zaurus feeds:  Link1, Link2 [/i][/font][/color][/size]

A5DF

  • Jr. Member
  • **
  • Posts: 53
    • View Profile
    • http://
Boot Problems?
« Reply #4 on: June 09, 2007, 11:10:12 pm »
"I guess it is necessary to flash back to Sharp rom first."

how?
Logged

adf

  • Hero Member
  • *****
  • Posts: 2807
    • View Profile
    • http://
Boot Problems?
« Reply #5 on: June 09, 2007, 11:23:56 pm »
Quote
"I guess it is necessary to flash back to Sharp rom first."

how?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=162923\"][{POST_SNAPBACK}][/a][/div]
the usual way is to get the restore image (from trisoft's site)  and do a nand restore.
Logged
**3100 Zubuntu Jaunty,(working on Cacko dualboot), 16G A-Data internal CF, 4G SD, Ambicom WL-1100C Cf, linksys usb ethernet,  BelkinF8T020 BT card, Belkin F8U1500-E Ir kbd, mini targus usb mouse, rechargeble AC/DC powered USB hub, psp cables and battery extenders.

**6000l  Tetsuized Sharprom, installed on internal flash only 1G sd, 2G cf

A5DF

  • Jr. Member
  • **
  • Posts: 53
    • View Profile
    • http://
Boot Problems?
« Reply #6 on: June 09, 2007, 11:47:22 pm »
http://www.trisoft.de/en_c3100howto.htm

Got two of these, one since my disc has been partitioned. Will someone walk me through this? The instructions are not quite clear? Found this too.

http://www.figlabs.com/catalog/ug-return-to-box-state.php

update:

Well I put the file on SD, and it says it's not there? Now I can't boot, can't [D] , and I can only get anything from [D] [M]. Went from this is messy, to almost a brick? Seems OZ really ^%$#'ed my Z? I search these forums, and find almost no comprehensive information? Only bits, and bobs scattered all about? Not to sound redundant, but help? Please?
« Last Edit: June 10, 2007, 03:40:14 pm by A5DF »
Logged

A5DF

  • Jr. Member
  • **
  • Posts: 53
    • View Profile
    • http://
Boot Problems?
« Reply #7 on: July 01, 2007, 03:25:42 pm »
Well, I'm back again. I got rid of that pesky OZ boot info, and I reinstalled OpenBSD/zaurus. I'm not sure what to do to fix my new problem?

"When trying to mound hda1, it fails and gives me a "HDD1 error!!"."

I get this same error? I have the old hd0a, hd0b setup.
Logged

jpmatrix

  • Hero Member
  • *****
  • Posts: 1014
    • View Profile
    • http://matrixmen.free.fr
Boot Problems?
« Reply #8 on: July 02, 2007, 06:34:30 am »
Quote
Well, I'm back again. I got rid of that pesky OZ boot info, and I reinstalled OpenBSD/zaurus. I'm not sure what to do to fix my new problem?

"When trying to mound hda1, it fails and gives me a "HDD1 error!!"."

I get this same error? I have the old hd0a, hd0b setup.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=164108\"][{POST_SNAPBACK}][/a][/div]

i don't understand when you actually have your problem :
is it on openbsd boot  ? have you successfully follow all openbsd install process ?
did you reinstall stock Sharp rom before going to openbsd ?
Logged
**Fujitsu U1010 !!!  
**ex-Zaurus SL-C3000 owner with Debian kernel 2.6.24-yonggun

A5DF

  • Jr. Member
  • **
  • Posts: 53
    • View Profile
    • http://
Boot Problems?
« Reply #9 on: July 02, 2007, 11:03:28 am »
Ok, yes. I reflashed with trisoft's rom.Then I reinstalled OpenBSD again. Now I get "SHARP" boot up, and then the error.
Logged

mathemajikian

  • Sr. Member
  • ****
  • Posts: 301
    • View Profile
    • http://exit3.i-55.com/~xikon/openbsdzaurus.html
Boot Problems?
« Reply #10 on: August 05, 2007, 08:12:16 pm »
Quote
Ok, yes. I reflashed with trisoft's rom.Then I reinstalled OpenBSD again. Now I get "SHARP" boot up, and then the error.
Did you ever get OpenBSD installed on your SL-C3100?
Logged

A5DF

  • Jr. Member
  • **
  • Posts: 53
    • View Profile
    • http://
Boot Problems?
« Reply #11 on: August 19, 2007, 09:03:00 pm »
Quote
Quote
Ok, yes. I reflashed with trisoft's rom.Then I reinstalled OpenBSD again. Now I get "SHARP" boot up, and then the error.
Did you ever get OpenBSD installed on your SL-C3100?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=165816\"][{POST_SNAPBACK}][/a][/div]

No. I had to leave state to train again. I just got back yesterday. Sometime soon I may get back to this again. I'm partly stalled up again by the idea I'm not gonna be able to port maemo, or qtopia. Also I'm looking hard at openmoko, and its UI once it's released. I'm not gonna work on porting phoneme until I'm happy on some UI. Let's say I'm under one big "undecided" atm.
Logged
Pages: [1]
← previous next →