← previous next →
Pages: [1]

Author Topic: Linksys Usb200m & Usb Hub  (Read 5816 times)

dinozaurz

  • Newbie
  • *
  • Posts: 3
    • View Profile
Linksys Usb200m & Usb Hub
« on: February 13, 2008, 02:47:34 am »
Hi.

Does USB200M work with C3200 without an USB hub? If no, is there any Ethernet USB dongles which does not require an USB hub?

Thanks
« Last Edit: February 13, 2008, 03:45:21 am by dinozaurz »
Logged

sidmoraes

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • http://
Linksys Usb200m & Usb Hub
« Reply #1 on: February 13, 2008, 05:12:25 am »
Hi,

Ethernet dongles? Yes, I have a generic one, and works great. I don't know about USB200M.

Wifi dongles requires powered usb hub.
Logged
SL-C1000 ( Cacko-Rom 1.23 ) + SL-C3100 ( Cacko-Rom 1.23 )
2Gb SD, usb host cable made by myself, CF modem Xircom,
CF wifi Zonet, Hawking CF 10/100 ethernet,
 USB net, USB CD-Writer Sony CRX10U, CF to PCMCIA adapter,
PCMCIA 2G disk Toshiba, USB charger self-made,
USB BLuetooth,
RH2 ( Wired control for Z ) made by myself,
Serial cable, also made ...

dinozaurz

  • Newbie
  • *
  • Posts: 3
    • View Profile
Linksys Usb200m & Usb Hub
« Reply #2 on: February 13, 2008, 07:27:38 am »
Quote from: sidmoraes
Hi,

Ethernet dongles? Yes, I have a generic one, and works great. I don't know about USB200M.

Wifi dongles requires powered usb hub.

Great!

Could you tell us model of your dongle exactly?
Logged

Jon_J

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
    • http://
Linksys Usb200m & Usb Hub
« Reply #3 on: February 13, 2008, 02:23:59 pm »
If it's the one in the first pic below, the driver has to be backported from 2.6 kernel.
https://www.oesf.org/forum/index.php?showtopic=24903
The backside shows:
Model No. USB200M ver 2.1

As far as I know, there are not any usb ethernet dongles that require a powered hub. (this means the "wired" type of ethernet dongle).
USB WiFi dongles require a powered hub because these dongles draw more power than the Zaurus USB 1.1 supplies.

I have the Belkin - F5D5050 USB 1.1 10/100 Ethernet Adapter that works out of the box in pdaxii13.
It required some tweaking to make it work in Cacko.
I got it at RadioShack, it's shown in second pic.
« Last Edit: February 13, 2008, 02:37:44 pm by Jon_J »
Logged
C3100 Multiboot-->Angstrom 2007.12-r18 | Cacko 1.23 | ArchLinuxARM
C3200 pdaxii13v2-5.5-alpha4 Akita on NAND
Ambicom WL1100C-CF Wifi - Ambicom CF modem - Ambicom CF GPS - Belkin-F5D5050 USB LAN
Socket CF Bluetooth rev K - Iogear 4 port USB micro hub - pocket CF card reader
Targus mini USB optical mouse - 2 Targus SD card readers

jpmatrix

  • Hero Member
  • *****
  • Posts: 1014
    • View Profile
    • http://matrixmen.free.fr
Linksys Usb200m & Usb Hub
« Reply #4 on: February 13, 2008, 02:42:23 pm »
i've just tried my asus wl167g wifi dongle and it is recognized (kernel 2.6.24) !
however it apparently needs the ra2500 driver :
http://home.bb-zone.com/index.php/Ralink_RT2500_Linux_Howto
i'll try to compile it

EDITED: i cannot compile it because i need 2.6.24-yonggun kernel sources ....
« Last Edit: February 13, 2008, 02:50:59 pm by jpmatrix »
Logged
**Fujitsu U1010 !!!  
**ex-Zaurus SL-C3000 owner with Debian kernel 2.6.24-yonggun

dinozaurz

  • Newbie
  • *
  • Posts: 3
    • View Profile
Linksys Usb200m & Usb Hub
« Reply #5 on: February 14, 2008, 01:31:00 am »
Thanks, it gives me hope. But not all of them can work without a hub:( I have got Dlink DUB-E100, it works with powered hub only.
Logged
Pages: [1]
← previous next →