Author Topic: Zaurus 5500 with openzaurus flash problem (Read 2524 times)

mmc · « **on:** June 09, 2004, 04:08:54 pm »

When I ues my CF card to flash it, everything works until I try the first boot. All I get is the sharp Logo and a little blinking dot at the bottom, no words, numbers or anything appears. I let it continue but It eventually shuts off. I tried OZ 3.2 and 3.3.5, both resulted in this. I have a 128mb dane-elect CF card, never formatted the zimage is 32/32

lardman · « **Reply #1 on:** June 09, 2004, 04:29:55 pm »

This means the kernel hasn\'t flashed correctly.

Check the md5sums. Then try reformatting the card if they are okay.

kand77 · « **Reply #2 on:** June 10, 2004, 04:23:54 pm »

Hi!

I have the same problem... but it didnÂ´t works anything I tryed.
--] I used different kernels and different OZ... nothing just the Sharp-Logo and the blinking dot...

What can I do else???

(Sorry for my [maybe] bad english!)

kand

Mickeyl · « **Reply #3 on:** June 10, 2004, 05:28:35 pm »

Sharp Logo means you didn\'t flash the kernel. Probably your windows hides an extension or so. It has to be zImage, not zimage.foo nor zimage.bar.

News:

Author Topic: Zaurus 5500 with openzaurus flash problem (Read 2524 times)