← previous next →
Pages: 1 [2] 3 4 5

Author Topic: tkcjabber or Gaim  (Read 17581 times)

offroadgeek

  • Administrator
  • Hero Member
  • *****
  • Posts: 1419
    • View Profile
    • https://www.oesf.org
tkcjabber or Gaim
« Reply #15 on: December 11, 2003, 10:26:21 pm »
Quote
Can any of you see the icons on the buttons with Gaim?  I did an install this past weekend and I can chat but I have no pictures on the buttons.  I looked at the bug reports on sourceforge and found a reply that gave an extra library to install and some symlinks but that didn\'t seem to work for me.

I installed qpe-gaim v.4 on my 760 with cacko rom and I got the same as you, no icons/graphics in the gui.  I submitted a bug via the qpe-gaim bug page, but it hasn\'t been looked at.  I think there\'s only one developer (chipx86?) working on qpe-gaim, so it might be a bit before the bugs are fixed.

funny, v.2 worked just fine on my 760 before... I still have the files for that version (somewhere on my cf)... maybe I\'ll just go back to that version  
Logged
Search the OESF Wiki
C1000 w/Cacko 1.23 beta (from Streamline) / 760 pdaxrom rc9 / 6000L (thanks Santa's elf!) / 5500 - OZ 3.3.5 / SIMpad SL4
1GB, 256mb SanDisk CF / 2x 1GB, 512mb, 256mb, 128mb SanDisk SD
Ambicom WL100C-CF wifi / Socket 56k CF modem / AmbiCom BT2000-CF (x2)
Pocketop keyboard, Piel Frama case (1000 & 5500), PDAir case (760 & 1000)
sip:536093@fwd.pulver.com
| OESF | ELSI | Zaurus User Group | ZaurusThemes |

tumnus

  • Hero Member
  • *****
  • Posts: 1176
    • View Profile
    • http://www.cpinkney.org.uk
tkcjabber or Gaim
« Reply #16 on: December 12, 2003, 08:17:19 am »
Strange. Maybe there is a bug in the v0.4 packages. I still have icons, but I upgraded from v0.3.
Logged
# Search the Zaurus Howtos ## Search the Zaurus FAQs ## Find Z software at ELSI #
--------------------
UK SL5500 with Sharp ROM 3.13, SL5600 with Sharp ROM 1.32 - SuSE 9.0 Pro, Windows XP Home
Qualendar for Calendar and Todo
Socket Bluetooth CF Card (Rev F), Kingmax 512MB MMC Card, Palm Tungsten T Stylus,
Pretec CF->Smartmedia Adapter, Semsons Universal Battery Extender

tawalker

  • Jr. Member
  • **
  • Posts: 82
    • View Profile
    • http://
tkcjabber or Gaim
« Reply #17 on: December 12, 2003, 11:50:03 am »
Good news: tumnus, your reinstallation tip worked, so the Z is back as it was before (i.e. working!). Thanks again!

Bad news: I\'ve got the same problem as offroadgeek and others - finally got gaim to run, but there are no GUI features at all (buttons, etc.). I had to install libpng, as starting gaim from the terminal gave me the \"where\'s libpng?\" message; once I installed that, I tried running gaim (again, from the terminal), and got a whole slew of error messages before the program started.

AFAICS, the program is unusable in this state - does anyone have a fix, or will we have to wait for a new package from the qpe-gaim team?

At least I have a functional Z again...  

Thanks,
Tim
Logged
---
Tim Walker - UK
Sharp Zaurus SL-5500 - OZ 3.3.5
"A.N.Other" 128Mb MMC - Buffalo CF WiFi
---

offroadgeek

  • Administrator
  • Hero Member
  • *****
  • Posts: 1419
    • View Profile
    • https://www.oesf.org
tkcjabber or Gaim
« Reply #18 on: December 12, 2003, 02:02:18 pm »
Quote
Good news: tumnus, your reinstallation tip worked, so the Z is back as it was before (i.e. working!). Thanks again!

Bad news: I\'ve got the same problem as offroadgeek and others - finally got gaim to run, but there are no GUI features at all (buttons, etc.). I had to install libpng, as starting gaim from the terminal gave me the \"where\'s libpng?\" message; once I installed that, I tried running gaim (again, from the terminal), and got a whole slew of error messages before the program started.

AFAICS, the program is unusable in this state - does anyone have a fix, or will we have to wait for a new package from the qpe-gaim team?

At least I have a functional Z again...  :D  

Thanks,
Tim

I just grabbed the older v.2 files from my CF and put them in the ZUG downloads... you can grab a zip of them here.

This version worked for me on my 760 with the cacko rom... it may at least get you a working version in the mean time.
Logged
Search the OESF Wiki
C1000 w/Cacko 1.23 beta (from Streamline) / 760 pdaxrom rc9 / 6000L (thanks Santa's elf!) / 5500 - OZ 3.3.5 / SIMpad SL4
1GB, 256mb SanDisk CF / 2x 1GB, 512mb, 256mb, 128mb SanDisk SD
Ambicom WL100C-CF wifi / Socket 56k CF modem / AmbiCom BT2000-CF (x2)
Pocketop keyboard, Piel Frama case (1000 & 5500), PDAir case (760 & 1000)
sip:536093@fwd.pulver.com
| OESF | ELSI | Zaurus User Group | ZaurusThemes |

tumnus

  • Hero Member
  • *****
  • Posts: 1176
    • View Profile
    • http://www.cpinkney.org.uk
tkcjabber or Gaim
« Reply #19 on: December 12, 2003, 02:45:46 pm »
Quote
I had to install libpng, as starting gaim from the terminal gave me the \"where\'s libpng?\" message; once I installed that, I tried running gaim (again, from the terminal), and got a whole slew of error messages before the program started.
I keep forgetting about all the little tricks I did to get Opie apps working on the Sharp ROM. Perhaps I should write a Howto.

Anyway, I didn\'t install libpng as there\'s a little cheat you can do. libpng has been compiled into the Sharp version of libqte, so all you have to do to get libpng is run this command as root:

ln -s /home/QtPalmtop/lib/libqte.so.2.3.2 /usr/lib/libpng12.so.0

I can\'t think of anything else I did though. What are the other errors you get?
Logged
# Search the Zaurus Howtos ## Search the Zaurus FAQs ## Find Z software at ELSI #
--------------------
UK SL5500 with Sharp ROM 3.13, SL5600 with Sharp ROM 1.32 - SuSE 9.0 Pro, Windows XP Home
Qualendar for Calendar and Todo
Socket Bluetooth CF Card (Rev F), Kingmax 512MB MMC Card, Palm Tungsten T Stylus,
Pretec CF->Smartmedia Adapter, Semsons Universal Battery Extender

mk500

  • Jr. Member
  • **
  • Posts: 50
    • View Profile
    • http://www.markandjo.com/markblog
tkcjabber or Gaim
« Reply #20 on: December 12, 2003, 04:21:08 pm »
I just un-installed libpng, and ran tumnus\' link command as root instead. This fixed my Gaim! Thanks tumnus!

It was wild. The second I created the link, the icons appeared in Gaim (it had been running while I worked in terminal).

Quote
Quote
I had to install libpng, as starting gaim from the terminal gave me the \"where\'s libpng?\" message; once I installed that, I tried running gaim (again, from the terminal), and got a whole slew of error messages before the program started.
I keep forgetting about all the little tricks I did to get Opie apps working on the Sharp ROM. Perhaps I should write a Howto.

Anyway, I didn\'t install libpng as there\'s a little cheat you can do. libpng has been compiled into the Sharp version of libqte, so all you have to do to get libpng is run this command as root:

ln -s /home/QtPalmtop/lib/libqte.so.2.3.2 /usr/lib/libpng12.so.0

I can\'t think of anything else I did though. What are the other errors you get?
Logged
SL-C760, PNY 256SD, Viking 1G CF, Socket CF WiFi, Socket CF Bluetooth, Cacko ROM 1.23
Nokia 770, Sandisk 1GB RS-MMC
my homepage: http://www.markandjo.com/markblog

Tehas

  • Full Member
  • ***
  • Posts: 157
    • View Profile
    • http://users.adelphia.net/~stonerrl/rick/
tkcjabber or Gaim
« Reply #21 on: December 12, 2003, 05:36:57 pm »
Ditto here, worked like a champ!  Thanks tumnus.
Logged
+SL-5600 v1.32 ROM (Special pre-emptive kernel with overclock)  +Viking 256CF  +SimpleTech 256CF  +Viking 128SD (as ext2)  +AmbiCom WL1100C +Micro Innovations KB  +Hawking Ethernet CF  
+SL6000L +Lexar 1GB SD (as ext2)  +Windows 98/Me/Nt/XP  +Mandrake 8.1 My Zaurus Page[img]http://users.adelphia.net/~stonerrl/rick/rls_userbar.gif\" border=\"0\" class=\"linked-sig-image\" /]

tawalker

  • Jr. Member
  • **
  • Posts: 82
    • View Profile
    • http://
tkcjabber or Gaim
« Reply #22 on: December 16, 2003, 10:39:58 am »
Worked for me too - thanks tumnus!
Logged
---
Tim Walker - UK
Sharp Zaurus SL-5500 - OZ 3.3.5
"A.N.Other" 128Mb MMC - Buffalo CF WiFi
---

tumnus

  • Hero Member
  • *****
  • Posts: 1176
    • View Profile
    • http://www.cpinkney.org.uk
tkcjabber or Gaim
« Reply #23 on: December 16, 2003, 11:31:51 am »
You\'re welcome
Logged
# Search the Zaurus Howtos ## Search the Zaurus FAQs ## Find Z software at ELSI #
--------------------
UK SL5500 with Sharp ROM 3.13, SL5600 with Sharp ROM 1.32 - SuSE 9.0 Pro, Windows XP Home
Qualendar for Calendar and Todo
Socket Bluetooth CF Card (Rev F), Kingmax 512MB MMC Card, Palm Tungsten T Stylus,
Pretec CF->Smartmedia Adapter, Semsons Universal Battery Extender

tawalker

  • Jr. Member
  • **
  • Posts: 82
    • View Profile
    • http://
tkcjabber or Gaim
« Reply #24 on: December 16, 2003, 11:59:31 am »
Slightly OT, but not too far:

Being completely new to IM (I\'m experimenting with it to communicate with two old friends in the town I recently moved away from), I don\'t know what\'s involved with getting IM clients working through a NAT firewall. At home, I have a broadband connection going through an SMC Barricade router, with a wireless access point for our laptop and my Zaurus.

Basically, I have two questions to help me get started with qpe-gaim:

(1) Can IM clients work behind a firewall, without needing to set up any port forwarding?
(2) If the answer is no (as I suspect), please could someone point me to some information on which ports to open?

Many thanks!

Tim
Logged
---
Tim Walker - UK
Sharp Zaurus SL-5500 - OZ 3.3.5
"A.N.Other" 128Mb MMC - Buffalo CF WiFi
---

Anonymous

  • Guest
tkcjabber or Gaim
« Reply #25 on: December 16, 2003, 03:21:18 pm »
hell, I haven\'t even tried it et.. but I *still* thank you.
and, yes, a howto would be lovely. :-)
(ScottYelich)
Logged

Tehas

  • Full Member
  • ***
  • Posts: 157
    • View Profile
    • http://users.adelphia.net/~stonerrl/rick/
tkcjabber or Gaim
« Reply #26 on: December 16, 2003, 08:15:57 pm »
AFAIK there is no problem being behind NAT or a firewall for that matter.  They work for me.  AIM and others are server based so you log in to the server and messages are passed back and forth by way of the server.   The only time that I think that you\'d have problem is if you tried a peer-to-peer model or possibly a brokered service but all the ones that I use are server based.
Logged
+SL-5600 v1.32 ROM (Special pre-emptive kernel with overclock)  +Viking 256CF  +SimpleTech 256CF  +Viking 128SD (as ext2)  +AmbiCom WL1100C +Micro Innovations KB  +Hawking Ethernet CF  
+SL6000L +Lexar 1GB SD (as ext2)  +Windows 98/Me/Nt/XP  +Mandrake 8.1 My Zaurus Page[img]http://users.adelphia.net/~stonerrl/rick/rls_userbar.gif\" border=\"0\" class=\"linked-sig-image\" /]

Tehas

  • Full Member
  • ***
  • Posts: 157
    • View Profile
    • http://users.adelphia.net/~stonerrl/rick/
tkcjabber or Gaim
« Reply #27 on: December 16, 2003, 09:34:09 pm »
Hey Tumnus, would you also happen to have any magic that would make the sounds work?
Logged
+SL-5600 v1.32 ROM (Special pre-emptive kernel with overclock)  +Viking 256CF  +SimpleTech 256CF  +Viking 128SD (as ext2)  +AmbiCom WL1100C +Micro Innovations KB  +Hawking Ethernet CF  
+SL6000L +Lexar 1GB SD (as ext2)  +Windows 98/Me/Nt/XP  +Mandrake 8.1 My Zaurus Page[img]http://users.adelphia.net/~stonerrl/rick/rls_userbar.gif\" border=\"0\" class=\"linked-sig-image\" /]

Anonymous

  • Guest
tkcjabber or Gaim
« Reply #28 on: December 16, 2003, 09:47:46 pm »
I use gaim behind a firewall without port forwarding. gaim uses these local ports:
----------------------
port state protocol
----------------------
3028 ESTABLISHED TCP
3029 LISTEN UDP
3030 LISTEN UDP
3031 LISTEN UDP
3032 LISTEN UDP
Logged

Anonymous

  • Guest
tkcjabber or Gaim
« Reply #29 on: December 19, 2003, 01:14:17 pm »
hi, i used tumnus\'s command but it gave me permission denied? how do i force it to make link? sorry really new to linux
Logged
Pages: 1 [2] 3 4 5
← previous next →