Messages

1

General Discussion / Help with networking

« on: June 18, 2017, 08:33:29 am »

Have you checked what's dmesg output?

Varti

Here it is Varti.

# dmesg
frame buffer device
keyboard initialized.
pty: 256 Unix98 ptys configured
SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS0 at iomem 0xf8100000 (irq = 14) is a PXA UART
ttyS1 at iomem 0xf8700000 (irq = 12) is a PXA UART
ttyS2 at iomem 0xf8200000 (irq = 13) is a PXA UART
rs_init: IRDA H/W initializaion
sharpled_init: done.
corgi remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
loop: loaded (max 8 devices)
PPP generic driver version 2.4.1
PPP BSD Compression module registered
ide_cs.c 1.26 1999/11/16 02:10:49 (David Hinds)
Corgi audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00120000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0xec, Chip ID: 0x79 (Samsung K9D1G08V0M) Creating 3 MTD partitions on "Samsung K9D1G08V0M":
0x00000000-0x00700000 : "smf"
0x00700000-0x02700000 : "root"
0x02700000-0x08000000 : "home"
Linux Kernel Card Services 3.1.22
  options:  [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.22)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
Backlight Driver Initialized.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 381
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 132K
block_size: 512
write_block_size: 512
block_count: 3862528
total_size: 1931264KB
SDHC=0
[SD]-clustsize = 8000
Partition check:
 mmcda: mmcda1
SD Driver Initialized.
sharp_mmcsd 0.21 27 Sep 2002
VFS: Disk change detected on device mmcd(60,1)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
 mmcda: mmcda1
MSDOS FS: IO charset utf8
BlueZ Core ver 2.4 Copyright © 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
Adding Swap: 8188k swap-space (priority -1)
ttyS03 at port 0xf60003f8 (irq = 39) is a 16C950/954
BlueZ Core ver 2.4 Copyright © 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
BlueZ HCI UART driver ver 2.1 Copyright © 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
BlueZ L2CAP ver 2.3 Copyright © 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
BlueZ RFCOMM ver 1.1
Copyright © 2002 Maxim Krasnyansky <maxk@qualcomm.com>
Copyright © 2002 Marcel Holtmann <marcel@holtmann.org>
usbdm: usbd_monitor 0.3 035 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
storage_fd: storage_fd 0.1 035 2002-06-12 20:00 (OUT=64,IN=64)
storage_fd: vendorID: 4dd productID: 9050
pxa_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
monitor_modinit: finished
BlueZ HIDP ver 1.0
Copyright © 2003-2004 Marcel Holtmann <marcel@holtmann.org>
BlueZ BNEP ver 1.2
Copyright © 2001,2002 Inventel Systemes
Written 2001,2002 by Clement Moreau <clement.moreau@inventel.fr>
Written 2001,2002 by David Libault <david.libault@inventel.fr>
Copyright © 2002 Maxim Krasnyanskiy <maxk@qualcomm.com>
#
# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.12.0    *               255.255.255.0   U     0      0
0 bnep0
^[[B^[[Bdefault         192.168.12.10   0.0.0.0         UG    0      0        0 bnep0
# route

keef

2

General Discussion / Help with networking

« on: June 11, 2017, 07:21:33 am »

Hi and welcome back!

What ROM/distro are you running on you Zaurus?

Varti

Hi Varti,

I am using the Cacko rom. 1.23

cheers,

keef

3

General Discussion / Help with networking

« on: June 11, 2017, 06:44:10 am »

Hi all,

Good to see the forum back up.
Wonder if anyone can help.
I am trying to share my iPhone connection to the z via bluetooth.
It pairs and connects fine and the blue highlight shows on the iPhone
to say that a shared connection is active.

I have created a new connection to bnep0 and added
route add default gw.

Still cannot connect using the mail app or web browser.
If I try and ping a connection the console just stalls.

I have tried all combinations of using the network application
and connection via console or the bluetooth guy with exactly the same
result.

It would be great to get this working as it would mean i could use my
zaurus again.

thanks in advance
keef

4

C1000/3x00 Hardware / Alive?

« on: April 06, 2015, 05:44:57 am »

Thanks for sharing this Jon_J.

keef

5

C1000/3x00 Hardware / Alive?

« on: March 23, 2015, 07:38:38 pm »

Anyone still alive here?  I got my zaurus back out and I finally got wpa working on cacko 1.23 lite on my SL-C3000 so it will hopefully have some new utility.  I can't believe that zaurus has less attention and support these days than my 25 year old Atari computers

Hi ,

love to know how you got wpa working.Any info?


keef

6

General Discussion / Happy New Year

« on: January 05, 2014, 05:12:37 pm »

Hi and Happy New year

Unfortunately it will not be  happy new year as no one posts  anymore.

Also most of the links above now no longer work.

Is there anyone there?


keef

7

Security and Networking / Bluetooth Internet

« on: December 26, 2012, 03:53:18 pm »

Hi,

I dont know if there is anyone to answer this as it is very quiet around here.

Have been struggling with this for ages. I can no longer use my wireless card

as most systems seem to be using wpa and I do not have a card for this.

Thinking that i could use bluetooth sharing from my iMac I have tried to set this

up using the various instructions available i.e. Bluetooth PAN setup.  I can connect fine

and set up a gateway to the mac and config bnep0. Sometimes I can even ping mac and

vice versa. I can even see from the Mac console that Internet sharing is fired up when I

connect. What I can't achieve however is to browse the internet from the Z ( c860)Cacko.

Have tried every version of ip and gateway I can think of and am now stuck.

If there is anyone out there with some info I would appreciate any suggestions.

Many Thanks,

keef

8

General Discussion / Nasty Blip In Audio

« on: August 19, 2011, 02:38:53 pm »

[quote name='Jon_J' date='Aug 19 2011, 06:23 AM' post='195738']
The blip may be recorded in the tracks. Copy a few tracks to your desktop computer and open one mp3 with an audio editor program that lets you edit the waveform.
There is probably a "spike" at the end of the audio file. Just use the option to fade to silence, or just manually silence the "spike". I had to do this to a lot of my karaoke mp3 files.

Hi,

I have tried your suggestion but cannot see any spike in the tracks - hey are all straight from commercial cd or itunes.
Thanks for the reply.


keef

9

General Discussion / Want To Use My Sl-c1000, Any Ideas?

« on: August 19, 2011, 02:24:25 pm »

My typical use would be as an e-book reader (PDFs mostly), movies, and web browsing.  However, something I would really like to use it for is to manage a home control, monitoring, and security systems.  Would be a nice device to control lighting, temp, and access security cameras.  Really would like to get back into tinkering around again.

My suggestion is that you would install some broader distro, Debian or Zubuntu for example. I have Debian on my 3100,
more than 29 000 programs to choose from. Then just do some googling, linux home automation.

I use my Z as a gps device, calculator(!), take  notes, music player and when travelling, as web surfing platform, and whatever
possible with tiny display and keyboard. That is a lot  :rolleyes:

Openbox makes X quite responsive, other light dm:s are available too. Many pdf readers also, xpdf lightweight.

Hi- How do you use your z as a Gps device?

keef

10

General Discussion / Nasty Blip In Audio

« on: August 18, 2011, 07:46:10 am »

Hi all,

I am using my Z to play mp3 tracks which it does reasonably well.
only problem is that at the end of each track there is an audio
blip where it stops playing and then starts the next track.
Just wondered if anyone else had encountered this and knew
of a solution. I am using the stock audio  player, kino and
Quasar media player all seem to do the same.


Cheers,

keef

c860 with cacko

11

Security and Networking / Network Password

« on: May 19, 2011, 07:10:39 pm »

ok thanks

Hi All,

I would like to improve the security of my Z when on a wireless network.
I find that the Z appears on the desktop of Mac computers on the
same network just as any ordinary disk. Is there a way to password protect
the files? I.e. to make a secure login from other computers.

thanks

keef


c860 running Cacko 1.23

 I think you'll find it is to do with samba. Do a forum search and you'll find the info. From a good many years back...

12

Security and Networking / Network Password

« on: May 12, 2011, 05:25:21 am »

Hi All,

I would like to improve the security of my Z when on a wireless network.
I find that the Z appears on the desktop of Mac computers on the
same network just as any ordinary disk. Is there a way to password protect
the files? I.e. to make a secure login from other computers.

thanks

keef


c860 running Cacko 1.23

13

General Discussion / Larger Sdhc Cards On Sharp Rom

« on: May 15, 2010, 03:16:11 pm »

Here the module wanted by the patch.

hey that's great.

many, many thanks


keef

14

General Discussion / Larger Sdhc Cards On Sharp Rom

« on: May 15, 2010, 11:33:32 am »

"md5sum /lib/modules.rom/2.4.18-rmk7-pxa3-embedix/kernel/drivers/block/sharp_mmcsd_m.o" will give you the md5 of your module.

Hi,

Ok it is different: aa56b369c30228a49ddc3dd29eed6b6f  

looks like I will have to follow advise from cybersphinx and reflash and try and grab the module.

I got the impression from various threads that this driver would install ok under cacko but maybe not.

15

General Discussion / Larger Sdhc Cards On Sharp Rom

« on: May 14, 2010, 07:58:10 pm »

Hi, just checked system info and this is the same module I have installed and yet the new update will still not install.

I have never known system info to give an md5 of the modules. Same name does not mean it is the same module. Did you verify that your module has the same md5?

It looks like the ipk for this module on the cxx0 Zaurus needs to actually compile and link the driver when it is installed whereas on the cxx00 it just has a precompiled module and installs just that. Kind of strange.

Hi, not sure what an Md5 is!

Here is the info:

filename: /lib/modules.rom/2.4.18-rmk7-pxa3-embedix/kernel/drivers/block/sharp_mmcsd_m.o
description: "Sharp PDA MMC/SD driver"
author: "Sharp and Lineo and HTC"

keef