Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - LukeLuke

Pages: [1] 2 3 ... 12
1
Italy / Alimentatore
« on: December 11, 2006, 12:05:16 pm »
lo puoi alimentare con un cavo usb per alimentare la psp.....hanno lo stesso attacco e voltaggio!


Bye

2
Zaurus - pdaXrom / Can I Set A Latency On The Power On Buttons.....
« on: December 01, 2006, 11:06:21 am »
Hello, i have a problem, when i put my Z in the bag, the Z power on because something for error push the power on button.......

Can i set that the Z start only when i press the power button and hold it for 5 seconds ?

THANKS

Bye

3
Sharp ROMs / Problem To Install Cacko
« on: November 08, 2006, 11:25:40 am »
Quote
You can try like this:

reflash your zaurus with a NAND-roginal-backup, you can find the files here.

after try to install cacko.

I don't know but I think that cacko need files of the original sharp-rom....maybe..
[div align=\"right\"][a href=\"index.php?act=findpost&pid=145732\"][{POST_SNAPBACK}][/a][/div]

I try to do so...but nothing...

When start appear the SHARP logo and nothing.....

THANKS

Bye

4
Cxx0 Hardware / Nand Flash Memory -> Bad Block Num=4
« on: October 20, 2006, 10:06:50 am »
Quote
I think no one is answering because you didnt search... and also...

You posted @
Oct 18 2006, 05:06 PM
Oct 18 2006, 05:16 PM
Oct 18 2006, 05:27 PM

asking the same question and getting frustrated because no one is answering...

Late
[div align=\"right\"][a href=\"index.php?act=findpost&pid=144396\"][{POST_SNAPBACK}][/a][/div]

IMHO, this isn't the metod for help the people........

I'm frustrated because have a Z that not work and nobody that help me ..........

I would want to understand if the Z is broken or the card that isn't compatible.

THANKS

Bye

5
Cxx0 Hardware / Nand Flash Memory -> Bad Block Num=4
« on: October 20, 2006, 02:21:31 am »
This is a for of Zaurus ?

Why nothing answer to me ?

My question is so difficult ?

Bye

6
Sharp ROMs / Problem To Install Cacko
« on: October 19, 2006, 04:08:33 am »
I try so say this post:
https://www.oesf.org/forums/index.php?showt...ndpost&p=114915

BUT DON'T WORK !

7
Cxx0 Hardware / Nand Flash Memory -> Bad Block Num=4
« on: October 18, 2006, 05:27:14 pm »
if buy this http://cgi.ebay.it/ws/eBayISAPI.dll?ViewIt...mMakeTrack=true

Do you think that this work ?

THANKS

Bye

8
Cxx0 Hardware / Nand Flash Memory -> Bad Block Num=4
« on: October 18, 2006, 05:16:05 pm »
i want to buy a card that i can sure that work................

Which ?????

9
Cxx0 Hardware / Nand Flash Memory -> Bad Block Num=4
« on: October 18, 2006, 05:06:20 pm »
I don't know what do .....

Everething i do, don' t work....

NAND Flash erase and try to install r121, but nothing when i press on it don't start....

What can i do ?

Which can you use for install the ROM ? Wich card you suggest me ? (i have this http://i23.ebayimg.com/02/i/08/2f/65/bf_2.JPG )

THANKS

Bye

10
OpenBSD / How To Install Openbsd On C1000 ?
« on: October 18, 2006, 09:40:00 am »
Hello, i have a sharp rom on my C1000, i have one card SD 1gb Kingston and a CF card Wi-fi XI-825.

How can i install openBSD ?
Wich are the file ?

What i must do ?

THANKS

Bye  

11
Cxx0 Hardware / Nand Flash Memory -> Bad Block Num=4
« on: October 14, 2006, 11:50:54 am »
Quote
Hi LuckyLuke,
Quote
can anyone help me ?
what's the problem ? What doesn't work ?
Having some bad blocks reported in the Diag is normal.
Even brand new units have some bad blocks. NAND chips
have mostly some defective areas and the controller will
handle this, so it's no reason to be worried.

Why are you trying to format the flash area ? Are you stuck
after a "went-wrong-Rom-installation" ?
Please give us some more informations.

Marc
[div align=\"right\"][a href=\"index.php?act=findpost&pid=143908\"][{POST_SNAPBACK}][/a][/div]

All the installation that i can do, don't work well  (see the other post).

I try Cacko, but when start, i see only the Sharp logo and do nothing...... (see the post)
I try Beta 3 and the system don't found many file ..... (see the post)
I try Beta r121, the installation is ok, but when i press on button the Z don't start......

WHAT CAN I DO ?

If i use your NAND Backup the Z work well..........

THANKS

Bye

12
Cxx0 Hardware / Nand Flash Memory -> Bad Block Num=4
« on: October 14, 2006, 11:46:21 am »
Quote
Tried erase NAND, before install new ROM?
Have you tried w/ another SD/CF card?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=143958\"][{POST_SNAPBACK}][/a][/div]

Yes i try to erase before and i try CF Sandisk 32M / CF Sandisk 64M / CF Sandisk 512M / SD Kingston 1GB....... but the result is the same!

What do you mean ?

THANKS

Bye

13
Cxx0 Hardware / Nand Flash Memory -> Bad Block Num=4
« on: October 13, 2006, 03:33:31 am »
can anyone help me ?

THANKS

Bye

14
Cxx0 Hardware / Nand Flash Memory -> Bad Block Num=4
« on: October 12, 2006, 08:48:18 am »
I try to make:

SUM MENU -->
NAND Bad Count+Sum -->

[CODE]
NAND Bad Count

Blk   Init   After   Total
-------------------------------------
 1       4       0         4
 2       0       0          0
.......................
.............
.........
-------------------------------------
Total Bad Block = 4

15
Cxx0 Hardware / Nand Flash Memory -> Bad Block Num=4
« on: October 12, 2006, 08:42:34 am »
I was tring to install various ROM and none works right.....

Cacko    https://www.oesf.org/forums/index.php?showtopic=21601&hl=
Beta 3    https://www.oesf.org/forums/index.php?showtopic=21089&hl=

only pdaxrom beta4 works, so i try to make:

 Extra MENU -->
 Zaurus Test -->
 NAND Flash (Full) -->

The result is:

Bad Block Num = 4

Can do this the problem ?

What can i do ?

THANKS

Bye

Pages: [1] 2 3 ... 12