Try to start syslog (/etc/rc.d/init.d/syslog start) and see what messages appear (tail -f /var/log/messages) when you insert your USB stick.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=65956\"][{POST_SNAPBACK}][/a][/div]
Hi maslovsky,
I use Cacko 1.22 Lite and have the same problem with the with the RATOC CFU1-Card and a USB stick. I found the following in /var/log/messages:
Feb 7 20:03:07 zaurus daemon.info cardmgr[164]: initializing socket 0
Feb 7 20:03:07 zaurus daemon.info cardmgr[164]: socket 0: RATOC USB HOST CF+ Card
Feb 7 20:03:07 zaurus daemon.info cardmgr[164]: executing: 'modprobe usbcore'
Feb 7 20:03:07 zaurus syslog.info klogd: usb.c: registered new driver usbdevfs
Feb 7 20:03:07 zaurus syslog.info klogd: usb.c: registered new driver hub
Feb 7 20:03:07 zaurus daemon.info cardmgr[164]: executing: 'modprobe hc_sl811'
Feb 7 20:03:07 zaurus daemon.info cardmgr[164]: executing: 'modprobe sl811_cs'
Feb 7 20:03:07 zaurus syslog.info klogd: cf_usb0: index 0x04: Vcc 3.3, irq 39, io 0xf6000000-0xf6000007
Feb 7 20:03:07 zaurus syslog.info klogd: usb.c: new USB bus registered, assigned bus number 1
Feb 7 20:03:07 zaurus syslog.info klogd: hc_sl811.c: USB SL811 at f6000000,f6000001, IRQ 39
Feb 7 20:03:07 zaurus syslog.info klogd: hub.c: USB hub found
Feb 7 20:03:07 zaurus syslog.info klogd: hub.c: 1 port detected
Feb 7 20:03:08 zaurus daemon.info cardmgr[164]: executing: './usb-host start cf_usb0'
Feb 7 20:03:08 zaurus user.notice /etc/hotplug/usb.agent: Setup for USB product 0/0/0
Feb 7 20:03:13 zaurus syslog.info klogd: hub.c: USB new device connect on bus1/1, assigned device number 2
Feb 7 20:03:13 zaurus syslog.info klogd: hub.c: USB hub found
Feb 7 20:03:13 zaurus syslog.info klogd: hub.c: 1 port detected
Feb 7 20:03:13 zaurus syslog.info klogd: hub.c: USB new device connect on bus1/1/1, assigned device number 3
Feb 7 20:03:13 zaurus syslog.warn klogd: usb.c: USB device 3 (vend/prod 0x67b/0x2517) is not claimed by any active driver.
Feb 7 20:03:14 zaurus user.notice /etc/hotplug/usb.agent: Setup for USB product 67b/2515/100
Feb 7 20:03:14 zaurus user.notice /etc/hotplug/usb.agent: Setup for USB product 67b/2517/100
On /proc there is no scsi file or directory.
I hope also, this will help.
Lutz