← previous next →
Pages: 1 ... 13 14 [15] 16 17 ... 20

Author Topic: Cacko3k Feedback  (Read 225919 times)

sriley

  • Full Member
  • ***
  • Posts: 155
    • View Profile
    • http://
Cacko3k Feedback
« Reply #210 on: May 06, 2005, 03:20:23 pm »
Quote
I'll gladly test it to death for you

So will I.  Add the new tetsu kernel and we can call it C3KB1A1(CEFRnR)  
Logged

ArchiMark

  • Administrator
  • Hero Member
  • *****
  • Posts: 1830
    • View Profile
Cacko3k Feedback
« Reply #211 on: May 06, 2005, 11:00:01 pm »
Not sure if my WiFi card problem relates to Cacko beta or not or other problem, but here we go....

Have Ambicom WL1100C-CF compact flash WiFi card. Was working OK before installing Cacko beta. Now doesn't connect...

I CAN connect to my home network, if put in my compact flash Socket ethernet lan card.

After trying to connect, I did the following in Konsole:
Code: [Select]
#iwconfig
lo    no wireless extensions.
Warning: Driver for device wlan0 has been compiled with version 14 of Wireless Extension. While this program is using version 13.

wlan0  IEEE 902.11-b  mode: Auto Access Point: 00:00:00:00:00:00
Encryption key: off
Is there something else I should check?
Logged
Silicon Valley Digerati - * Please see my Mini Laptops For Sale Listing *
Cosmo Communicator / One-Netbook One Mix Yoga 3S (Win 10/Manjaro 18)
Banana Pi Zero UMPC/Armbian
MacBookPro
Sold: C3200/N900/OQO/N5/Dell Mini9/Netwalker/UMID M1/

kahm

  • Hero Member
  • *****
  • Posts: 657
    • View Profile
Cacko3k Feedback
« Reply #212 on: May 07, 2005, 12:28:56 am »
Anyone got a VNC server working on the Cacko3kb1? I tried using the zaurus-fbvncserver_0.3-slc700-0.4-2_arm.ipk from the Cacko Feed, but it crashed Qtopia every few minutes, and wouldn't accept input from the VNC client.  Once Qtopia crashed it wouldn't start properly again - it seemed to get stuck in a loop after I canceled the "set time" applet.
Logged
Fujitsu U8240 "Stormtrooper" -  Zaurus Supplement
Libretto U100 | Sony Librie, Sony Reader
SL-C3100: Sharp 1.11JP (Kanji Dictionary/Translator) - LCD Top swap with C1000.
SL-C3000: pdaXii13 5.4.7, SL-C3000 5.4.9 - microdrive replaced with 8gb Sandisk
SL-C1000: PDAXRom Beta3 | SL-6000L: Sharp 1.12 | SL-5500: Cacko, 64-0 kernel | SL-5000D: OZ-Opie
Linksys WCF12; Sharp CE-AG06, CE-RH2, CE-170TS; iRiver USB OTG Host cable; Socket BT rev.E CF; Hitachi 6gb Microdrive

iamasmith

  • Hero Member
  • *****
  • Posts: 1248
    • View Profile
Cacko3k Feedback
« Reply #213 on: May 07, 2005, 06:26:03 am »
Quote
Not sure if my WiFi card problem relates to Cacko beta or not or other problem, but here we go....

Have Ambicom WL1100C-CF compact flash WiFi card. Was working OK before installing Cacko beta. Now doesn't connect...

I CAN connect to my home network, if put in my compact flash Socket ethernet lan card.

After trying to connect, I did the following in Konsole:
Code: [Select]
#iwconfig
lo    no wireless extensions.
Warning: Driver for device wlan0 has been compiled with version 14 of Wireless Extension. While this program is using version 13.

wlan0  IEEE 902.11-b  mode: Auto Access Point: 00:00:00:00:00:00
Encryption key: off
Is there something else I should check?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=78649\"][{POST_SNAPBACK}][/a][/div]

Are you :-

1. Using the same profile in the Network applet to connect? If different please compare all settings.

2. Using DHCP at all? If so what type of DHCP server.?

3. Seeing the connection status appear on any logs on your AP device, then disappear.?

- Andy
Logged
OpenBSD 4.2 -current on full 4Gb of SL-C3000
Microdrive replaced with 4Gb SanDisk Extreme III card

russell

  • Newbie
  • *
  • Posts: 32
    • View Profile
    • http://www.brittanycottage.org
Cacko3k Feedback
« Reply #214 on: May 07, 2005, 12:41:25 pm »
Hi,
I've just installad the Cacko ROM and have also found that my AmbiCom WL1100C-CF has stopped working. I only have the one profile so there's no confusing there, I am connecting to a DHCP server which works with all other machines without a problem.

I'm unclear to what the Cacko ROM would have changed to stop the card from operating correctly.

Has anyone got an Ambicom working correctly? When I insert the card it is recognised as a Z-Com XI300, is that correct or is that the problem?

Russell  
Logged
[span style=\'font-size:8pt;line-height:100%\']Dynamism Sharp SL-C3000
Cacko 1.23 beta1 ROM - Although WLAN not functioning still!
Ambicom WL1100C Wireless Card
Kingston 256MB SD Card[/span]

ArchiMark

  • Administrator
  • Hero Member
  • *****
  • Posts: 1830
    • View Profile
Cacko3k Feedback
« Reply #215 on: May 07, 2005, 02:33:04 pm »
Forgot to mention in my previous post about my Ambicom card that like Russel's card, mine too is recognized when I insert it as a Z-Com XI300 card....

Again, my WiFi card worked great before Cacko....have checked all the setup items in Network....

I can connect to my network with my Socket 10/100 ethernet card easily with no problems.

Just remembered one thing that's now missing from the Network app by Sharp....
when you click on the Wizard button, it says that "Internet Wizard has not been installed".....

HTH,

Mark

Quote
Hi,
I've just installad the Cacko ROM and have also found that my AmbiCom WL1100C-CF has stopped working. I only have the one profile so there's no confusing there, I am connecting to a DHCP server which works with all other machines without a problem.

I'm unclear to what the Cacko ROM would have changed to stop the card from operating correctly.

Has anyone got an Ambicom working correctly? When I insert the card it is recognised as a Z-Com XI300, is that correct or is that the problem?

Russell  
[div align=\"right\"][a href=\"index.php?act=findpost&pid=78685\"][{POST_SNAPBACK}][/a][/div]
« Last Edit: May 07, 2005, 03:07:16 pm by ArchiMark »
Logged
Silicon Valley Digerati - * Please see my Mini Laptops For Sale Listing *
Cosmo Communicator / One-Netbook One Mix Yoga 3S (Win 10/Manjaro 18)
Banana Pi Zero UMPC/Armbian
MacBookPro
Sold: C3200/N900/OQO/N5/Dell Mini9/Netwalker/UMID M1/

mulveyr

  • Newbie
  • *
  • Posts: 27
    • View Profile
Cacko3k Feedback
« Reply #216 on: May 07, 2005, 05:47:08 pm »
Quote
Forgot to mention in my previous post about my Ambicom card that like Russel's card, mine too is recognized when I insert it as a Z-Com XI300 card....

Again, my WiFi card worked great before Cacko....have checked all the setup items in Network....

I can connect to my network with my Socket 10/100 ethernet card easily with no problems.

Just remembered one thing that's now missing from the Network app by Sharp....
when you click on the Wizard button, it says that "Internet Wizard has not been installed".....

HTH,

Mark

Quote
Hi,
I've just installad the Cacko ROM and have also found that my AmbiCom WL1100C-CF has stopped working. I only have the one profile so there's no confusing there, I am connecting to a DHCP server which works with all other machines without a problem.

I'm unclear to what the Cacko ROM would have changed to stop the card from operating correctly.

Has anyone got an Ambicom working correctly? When I insert the card it is recognised as a Z-Com XI300, is that correct or is that the problem?

Russell   
[div align=\"right\"][a href=\"index.php?act=findpost&pid=78685\"][{POST_SNAPBACK}][/a][/div]
[div align=\"right\"][a href=\"index.php?act=findpost&pid=78690\"][{POST_SNAPBACK}][/a][/div]


And just to confuse the issue.... I have the same card, and it gets recognized as the Z-COM card - but the Ambicom works perfectly fine, connecting to my Linksys AP, using WEP.  No problems with my work AP's either.
Logged

mulveyr

  • Newbie
  • *
  • Posts: 27
    • View Profile
Cacko3k Feedback
« Reply #217 on: May 07, 2005, 05:49:57 pm »
Quote
Quote
Forgot to mention in my previous post about my Ambicom card that like Russel's card, mine too is recognized when I insert it as a Z-Com XI300 card....

Again, my WiFi card worked great before Cacko....have checked all the setup items in Network....

I can connect to my network with my Socket 10/100 ethernet card easily with no problems.

Just remembered one thing that's now missing from the Network app by Sharp....
when you click on the Wizard button, it says that "Internet Wizard has not been installed".....

HTH,

Mark

Quote
Hi,
I've just installad the Cacko ROM and have also found that my AmbiCom WL1100C-CF has stopped working. I only have the one profile so there's no confusing there, I am connecting to a DHCP server which works with all other machines without a problem.

I'm unclear to what the Cacko ROM would have changed to stop the card from operating correctly.

Has anyone got an Ambicom working correctly? When I insert the card it is recognised as a Z-Com XI300, is that correct or is that the problem?

Russell   
[div align=\"right\"][a href=\"index.php?act=findpost&pid=78685\"][{POST_SNAPBACK}][/a][/div]
[div align=\"right\"][a href=\"index.php?act=findpost&pid=78690\"][{POST_SNAPBACK}][/a][/div]


And just to confuse the issue.... I have the same card, and it gets recognized as the Z-COM card - but the Ambicom works perfectly fine, connecting to my Linksys AP, using WEP.  No problems with my work AP's either.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=78709\"][{POST_SNAPBACK}][/a][/div]


Though, I just noticed....

I set up a PPP connection for use with my mobile phone.  But, the only connections I can use are WIFI - the network applet only shows the WiFi connections, and even when I go into the Network application and select the PPP devices - it won't connect to any PPP configuration.  When I click on Connect, it brings up the Network applet and shows only the wifi configurations!

Is this Cacko related?

- Rich
Logged

russell

  • Newbie
  • *
  • Posts: 32
    • View Profile
    • http://www.brittanycottage.org
Cacko3k Feedback
« Reply #218 on: May 08, 2005, 04:43:32 am »
I've been investigating a bit further, my AmbiCom will connect ok using Ad-Hoc, from which I can use Wellenreiter and view my Intel AP; but it is still not possible to connect to it.
I have a separate Cisco router which acts as the DHCP server, perhaps having a separate wireless AP and Cisco router is something to do with it. Although it has always worked perfectly in the past, before installing Cacko.

If DHCP is disabled in the Cisco router and on the Zaurus, it will connect for about 10seconds then announces:

'No Connection detected. Check your WEP Key settings and/or TCP/IP settings.'

Any ideas?

Russell
Logged
[span style=\'font-size:8pt;line-height:100%\']Dynamism Sharp SL-C3000
Cacko 1.23 beta1 ROM - Although WLAN not functioning still!
Ambicom WL1100C Wireless Card
Kingston 256MB SD Card[/span]

iamasmith

  • Hero Member
  • *****
  • Posts: 1248
    • View Profile
Cacko3k Feedback
« Reply #219 on: May 08, 2005, 05:14:00 am »
Quote
I've been investigating a bit further, my AmbiCom will connect ok using Ad-Hoc, from which I can use Wellenreiter and view my Intel AP; but it is still not possible to connect to it.
I have a separate Cisco router which acts as the DHCP server, perhaps having a separate wireless AP and Cisco router is something to do with it. Although it has always worked perfectly in the past, before installing Cacko.

If DHCP is disabled in the Cisco router and on the Zaurus, it will connect for about 10seconds then announces:

'No Connection detected. Check your WEP Key settings and/or TCP/IP settings.'

Any ideas?

Russell
[div align=\"right\"][a href=\"index.php?act=findpost&pid=78739\"][{POST_SNAPBACK}][/a][/div]

If a gateway is specified in the DHCP options it must be pingable, the Zaurus uses this as a comms check and displays that messsage as a general failure sort of message.

- Andy
Logged
OpenBSD 4.2 -current on full 4Gb of SL-C3000
Microdrive replaced with 4Gb SanDisk Extreme III card

slackwaresupport

  • Jr. Member
  • **
  • Posts: 91
    • View Profile
Cacko3k Feedback
« Reply #220 on: May 08, 2005, 09:17:29 pm »
anyone not able to sniff wireless, im getting not able to set monitor mode.  is the kernel not patched?
Logged

kahm

  • Hero Member
  • *****
  • Posts: 657
    • View Profile
Cacko3k Feedback
« Reply #221 on: May 08, 2005, 09:53:24 pm »
I don't think the kernel is patched. I was talking to iamasmith about it, and he said the kernel patches were the next thing to work on.

Speaking of which, do we have a status update of how things are going, and what needs to be done next? It's been a bit since the beta release, but things seem to be pretty quiet right now.
Logged
Fujitsu U8240 "Stormtrooper" -  Zaurus Supplement
Libretto U100 | Sony Librie, Sony Reader
SL-C3100: Sharp 1.11JP (Kanji Dictionary/Translator) - LCD Top swap with C1000.
SL-C3000: pdaXii13 5.4.7, SL-C3000 5.4.9 - microdrive replaced with 8gb Sandisk
SL-C1000: PDAXRom Beta3 | SL-6000L: Sharp 1.12 | SL-5500: Cacko, 64-0 kernel | SL-5000D: OZ-Opie
Linksys WCF12; Sharp CE-AG06, CE-RH2, CE-170TS; iRiver USB OTG Host cable; Socket BT rev.E CF; Hitachi 6gb Microdrive

slackwaresupport

  • Jr. Member
  • **
  • Posts: 91
    • View Profile
Cacko3k Feedback
« Reply #222 on: May 08, 2005, 11:09:55 pm »
k, thanks.  i have a few options that would be real great.
1.  in a network setup, a wireless network finder to show available networks.
2.  syncing.  
3.  and i guess a final release  :>
Logged

slackwaresupport

  • Jr. Member
  • **
  • Posts: 91
    • View Profile
Cacko3k Feedback
« Reply #223 on: May 08, 2005, 11:11:41 pm »
i tried the openzaurus rom.. its pretty good, good features, but i had data loose multiple times.  go to reboot and nothing be on the harddrive, then once come out from a suspend, had to reset, and everything was gone.
Logged

FRH

  • Newbie
  • *
  • Posts: 6
    • View Profile
Cacko3k Feedback
« Reply #224 on: May 09, 2005, 09:01:50 am »
Hi there

Nice Work. The installation is very simple, just follow the "readme".

I've tested my linksys WCF12. I have to inserted it 2 times in order to be taken by the Z.

It works ok with WEP (it's not that secure these days, but...)

Thanks for the good job

F.
Logged
Pages: 1 ... 13 14 [15] 16 17 ... 20
← previous next →