Author Topic: C3000 Won't Turn On (Read 3958 times)

totsubo · « **on:** April 12, 2005, 03:58:01 am »

I had my Z C3000 with me at the office today and was using it fine. When I came back home I tried but couldn't turn it on. At first I though the battery was dead so I plugged in the charger but still I can't turn it on. The charging light is one so I dunno what's up.

I tried removing the battery for a few seconds and putting it back in but that didn't help.

Any ideas?

mulveyr · « **Reply #1 on:** April 12, 2005, 09:07:07 am »

Quote

I had my Z C3000 with me at the office today and was using it fine. When I came back home I tried but couldn't turn it on. At first I though the battery was dead so I plugged in the charger but still I can't turn it on. The charging light is one so I dunno what's up.

I tried removing the battery for a few seconds and putting it back in but that didn't help.

Any ideas?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=74720\"][{POST_SNAPBACK}][/a][/div]

Did you try a reset?

totsubo · « **Reply #2 on:** April 12, 2005, 09:46:14 am »

Reset by pushing the reset button and lose my data? No.

My Z is up and working now. I guess there must be a minimum level the battery must be at, even with the charger plugged in, for the Z to come up. After letting it charge for an hour it booted up fine.

nilch · « **Reply #3 on:** April 12, 2005, 09:55:25 am »

You are not going to lose data by resetting - thats the beauty of the Zaurus (the recent ones).

Yes it takes a considerable charge to fire it up again.

bluedevils · « **Reply #4 on:** April 12, 2005, 11:20:13 am »

Yes Lithium Ion batteries have circuitry to prevent over charging. If there is not enough power for that circuitry, the Z won't power on.

totsubo · « **Reply #5 on:** April 12, 2005, 08:24:30 pm »

I didn't check but I thought resetting would undo revert the Z back to factory settings, no?

Thanks for the info on the battery! Makes it a bit annoying though when your battery runs out ... even though the Z is plugged into the wall it won't start

bluedevils · « **Reply #6 on:** April 12, 2005, 10:31:54 pm »

no, the newer Zs are more like a normal computer (especially the 3000 with a HDD). The information is not wiped out with loss of power (unless you are in the middle of editting something).

AndyTiedye · « **Reply #7 on:** April 13, 2005, 03:20:41 am »

Quote

I didn't check but I thought resetting would undo revert the Z back to factory settings, no?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=74859\"][{POST_SNAPBACK}][/a][/div]

That's a different "reset" involving navigating some menus in Japanese.

Just pulling the battery and pressing the reset button won't revert to factory settings.

News:

Author Topic: C3000 Won't Turn On (Read 3958 times)