Author Topic: Snes9x Blank Screen  (Read 2703 times)

alan

  • Full Member
  • ***
  • Posts: 221
    • View Profile
Snes9x Blank Screen
« on: May 08, 2005, 04:37:50 pm »
hi all !

snes9x doesn't work here on my c750 oz 3.5.3 opie. The sound works but the screen is blank. sdl is up to date (and instalation is checked). Any idea ?

alan

  • Full Member
  • ***
  • Posts: 221
    • View Profile
Snes9x Blank Screen
« Reply #1 on: May 09, 2005, 07:30:26 am »
Xora told me it comes from sdl that doesn't work properly on 2.6 kernels...

let's wait for updates !!

Lurker

  • Jr. Member
  • **
  • Posts: 74
    • View Profile
Snes9x Blank Screen
« Reply #2 on: September 23, 2005, 01:04:58 pm »
Snes9x on OZ 3.5.3 for the C3000, which uses the 2.4.20 kernel, exhibits exactly the same behavior. This is using the Snes9x from the 3.5.3 Opie feed: http://www.openzaurus.org/official/unstabl...1.39-r1_arm.ipk
The only obvious error message is "Can't detect machine defaulting to SL5000D detected machine is 'Sharp SL-5000D'"
« Last Edit: September 23, 2005, 01:08:51 pm by Lurker »
Zaurus SL-C3000
Zonet 802.11g USB (ZEW2501) --> Zydas ZD1211
IOGear Bluetooth USB (GBU211) --> Broadcom BCM2035
OpenZaurus 3.5.4.1 / GPE 2.7

Lurker

  • Jr. Member
  • **
  • Posts: 74
    • View Profile
Snes9x Blank Screen
« Reply #3 on: September 23, 2005, 01:05:59 pm »
root@spitz:~# snes9x /media/card/snes/Mega\ Man\ X\ \(E\).zip
Rate: 22050, Buffer size: 4096, 16-bit: yes, Stereo: yes, Encoded: no
QT_GetMachine: /proc/cpuinfo is Processor       : XScale-PXA270 rev 4 (v5l)
BogoMIPS        : 415.33
Features        : swp half thumb fastmult edsp
CPU implementor : 0x69
CPU architecture: 5TE
CPU variant     : 0x0
CPU part        : 0x411
CPU revision    : 4
Cache type      : undefined 5
Cache clean     : undefined 5
Cache lockdown  : undefined 5
Cache unified   : harvard
I size          : 32768
I assoc         : 32
I line length   : 32
I sets          : 32
D size          : 32768
D assoc         : 32
D line length   : 32
D sets          : 32
 
Hardware        : SHARP Spitz
Revision        : 0000
Serial          : 0000000000000000
 
Can't detect machine defaulting to SL5000D detected machine is 'Sharp SL-5000D'
QT_GetRotation: Read spec from '/tmp/qtembedded-root/QtEmbedded-0.spec'
 Rot=0, Qvga=0
QT_SetVideoMode: argSize=480x640
QT_SetVideoMode: qteSize=640x480
QT_SetVideoMode: fbSize=640x480
QT_SetVideoMode: qteRotation=0
QT_SetVideoMode: userRotation=-1
QT_SetVideoMode: sdlRotation=1
QT_SetVideoMode: qteKeyRotation=0
QT_SetVideoMode: sdlKeyRotation=1
Found ROM file header (and ignored it).
"MEGAMAN X" [checksum ok] LoROM, 16Mbits, Type: ROM only, Mode: 20, TV: PAL, S-RAM: 0Kb, ROMId: ???? Company:
 
root@spitz:~#
Zaurus SL-C3000
Zonet 802.11g USB (ZEW2501) --> Zydas ZD1211
IOGear Bluetooth USB (GBU211) --> Broadcom BCM2035
OpenZaurus 3.5.4.1 / GPE 2.7