Jumbo Xqt Package

[perseus]

Thanks again Meanie.

Yes it shows error messages like you said.

I will remove, and reinstall the debian file from the web. Perhaps with the heavy traffic I
was unable to download completely. I tried lots of times this morning before I finally was able to download.

Could I also download from somewhere else? Or should I continue to download it from the site on this thread?

Thanks.

[chuckster]

Thanks for your help meanie.
I removed as above and reinstalled.
This is the transcript:

ash-2.05$ su
bash-2.05# cd /mnt/cf
bash-2.05# ls -a
.                                   xqt-debian-install.sh
..                                  zaurus-debian-doc-v18-1.tar.gz
Documents                           zaurus-debian-jumbo-v18-b01.tar.gz
QtPalmtop                           zaurus-debian-openoffice114.tar.gz
bash-2.05# su
bash-2.05# ./xqt-debian-install.sh /hdd3/debroot

Debian PocketWorkstation for Zaurus Installer...

Installing PocketWorkstation to /hdd3/debroot
generating ext2 loop filesystem /hdd3/pocketworkstation
512+0 records in
512+0 records out
mke2fs 1.35 (28-Feb-2004)
/hdd3/pocketworkstation is not a block special device.
Proceed anyway? (y,n) Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
131072 inodes, 524288 blocks
26214 blocks (5.00%) reserved for the super user
First data block=1
64 block groups
8192 blocks per group, 8192 fragments per group
2048 inodes per group
Superblock backups stored on blocks:
        8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409

Writing inode tables: done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 33 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
/hdd3/pocketworkstation created
/hdd3/pocketworkstation mounted
Extracting Debian binaries. This will take a while ...
 
zcat: zaurus-debian-jumbo-v18-b01.tar.gz: unexpected end of file
tar: Unexpected EOF in archive
tar: Error exit delayed from previous errors
Debian files extracted.
Extracting OpenOffice binaries
OpenOffice files extracted.
preparing your network
Your /etc/hosts and /etc/resolv.conf under /hdd3/debroot have been updated.Please update them manually if your network settings or status changes.
 
Debian has been installed.
You can launch Debian from the Qt desktop via its icon or use:
xlauncher debian
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88979\"][{POST_SNAPBACK}][/a][/div]

It looks like your zaurus-debian-jumbo-v18-b01.tar.gz is only a partial file.
you can check by running

# zcat zaurus-debian-jumbo-v18-b01.tar.gz | tar tvf -

it should list all the files without error messages
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88981\"][{POST_SNAPBACK}][/a][/div]

You can also do a

Code: [Select]

gunzip -test zaurus-debian-jumbo-v18-b01.tar.gz
I think I'll try to add MD5 sums to the page so everyone can check the files that way...

[perseus]

Ok, downloaded debian file again and reinstalled.

Worked perfectly. Thanks meanie for all your hardwork. It looks awesome. I payed around with your instructions before the jumbo pack and I know how much time it takes to install and reinstall - and still not get it to work. So thanks again, you have done all of us newbies a GREAT HELP.

Thanks chuckster for your fast reply as well.

[Cresho]

....never mind  

but i do have one thing...it asks to install a file that i dont know which one i need.

missing lib or something. fresh install on c1000

[Meanie]

hi guys

i installed xqt and it installed flawlessley but when i look into the xlauncher file in the bin, it says to look for files in hdd3 but i am force installing into the card which is the /mnt/card

is there anything wrong with this picture?  i am a c1000 user.

when in installed the debian, the first time, it could not create simlink so i edited the installer sh file and replaced all /hdd3 with /mnt/card and it installed flawlessly with no errors but i still cant launch it from xlauncher or anything.  any ideas?

one last thing

after installing the xqt, it was reffering to a file which i did not have and asked me to please install them.  this is on a zaurus c1000 fresh.  nothing installed.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88987\"][{POST_SNAPBACK}][/a][/div]

there is a post earlier describing the change required for xlauncher.
this is going to be fixed with an updated install script as well.

what file did it refer to?

[Cresho]

lib something .so

i cant remember and i cant replicate it.

here we go..

i launched xlauncher and typed abiword

it asks for shared libraries libconv.so.2

[Meanie]

lib something .so

i cant remember and i cant replicate it.

here we go..

i launched xlauncher and typed abiword

it asks for shared libraries libconv.so.2
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88992\"][{POST_SNAPBACK}][/a][/div]

you need to install libiconv_1.8-2_arm.ipk

[Meanie]

An updated debian install script (version 0.3.5) is available now from
http://www.users.on.net/~hluc/myZaurus/jum...ian-install.zip

this one will allow you to install to other location (without needing you to edit the script and it will also update xlauncher)

[ArchiMark]

This is great, Meanie!

Also, thanks to Chuckster for hosting the files!

However, first time I downloaded the 'debian-jumbo-v18-b01' file it was 149MB in size. Then redownloaded it and it is 166MB in size. Did the check on the file and got some error messages..  

Would be great to know how large the downloaded file should be?

Thanks,

Mark

[tekwizard]

lib something .so

i cant remember and i cant replicate it.

here we go..

i launched xlauncher and typed abiword

it asks for shared libraries libconv.so.2
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88992\"][{POST_SNAPBACK}][/a][/div]

you need to install libiconv_1.8-2_arm.ipk
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88994\"][{POST_SNAPBACK}][/a][/div]

Hello,

I'm getting lots of error while starting Abiword, all related to xpm support or gtkiconfactory, for instance:

"(abiword:433) GdkPixbuf-Warning **: Can not open pixbuf loader module file
'/opt/QtPalmtop/etc/gtk-2.0/gdk-pixbuf.loaders': no such file or dir

Error loading XPM image loader imagetype 'xpm' is not supported"

Any clue whats going wrong and how to fix?

Thanks in advance,

Sebastian

[Meanie]

lib something .so

i cant remember and i cant replicate it.

here we go..

i launched xlauncher and typed abiword

it asks for shared libraries libconv.so.2
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88992\"][{POST_SNAPBACK}][/a][/div]

you need to install libiconv_1.8-2_arm.ipk
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88994\"][{POST_SNAPBACK}][/a][/div]

Hello,

I'm getting lots of error while starting Abiword, all related to xpm support or gtkiconfactory, for instance:

"(abiword:433) GdkPixbuf-Warning **: Can not open pixbuf loader module file
'/opt/QtPalmtop/etc/gtk-2.0/gdk-pixbuf.loaders': no such file or dir

Error loading XPM image loader imagetype 'xpm' is not supported"

Any clue whats going wrong and how to fix?

Thanks in advance,

Sebastian
[div align=\"right\"][a href=\"index.php?act=findpost&pid=89031\"][{POST_SNAPBACK}][/a][/div]

run

gdk-pixbuf-query-loaders > /opt/QtPalmtop/etc/gtk-2.0/gdk-pixbuf.loaders

[chuckster]

This is great, Meanie!

Also, thanks to Chuckster for hosting the files!

However, first time I downloaded the 'debian-jumbo-v18-b01' file it was 149MB in size. Then redownloaded it and it is 166MB in size. Did the check on the file and got some error messages..   

Would be great to know how large the downloaded file should be?

Thanks,

Mark
[div align=\"right\"][a href=\"index.php?act=findpost&pid=89028\"][{POST_SNAPBACK}][/a][/div]

The page does have the sizes of the packages (just to the right of the download link.) Here they are for reference:

xqt-gtk-jumbopack_0.4.3-0.6_arm.zip 14.8Mb
xqt-debian-install.zip 2.2K
zaurus-debian-doc-v18.tar.gz 13.1Mb
zaurus-debian-jumbo-v18-b01.tar.gz 94.5Mb
zaurus-debian-openoffice114.tar.gz 77.7Mb
firefox_0.9-2_arm.zip 7.1Mb

It sounds like your browser was trying to uncompress the file as it downloaded since you got more than 94.5Mb.  You might try using "wget" (either from Linux or the Cygwin version for Windows) to download the files. I've had more success in the past downloading large files with it than using a browser...

[ArchiMark]

Thanks for the info, chuckster!

Actually, I went ahead and downloaded debian-jumbo file again this morning. This time it downloaded as a 94.5MB file!... go figure....  

FWIW, I'm using Safari as browser on my desktop Mac....

Thanks again for hosting files!

Mark

The page does have the sizes of the packages (just to the right of the download link.) Here they are for reference:

xqt-gtk-jumbopack_0.4.3-0.6_arm.zip 14.8Mb
xqt-debian-install.zip 2.2K
zaurus-debian-doc-v18.tar.gz 13.1Mb
zaurus-debian-jumbo-v18-b01.tar.gz 94.5Mb
zaurus-debian-openoffice114.tar.gz 77.7Mb
firefox_0.9-2_arm.zip 7.1Mb

It sounds like your browser was trying to uncompress the file as it downloaded since you got more than 94.5Mb.  You might try using "wget" (either from Linux or the Cygwin version for Windows) to download the files. I've had more success in the past downloading large files with it than using a browser...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=89038\"][{POST_SNAPBACK}][/a][/div]

[perseus]

Ok, I have another minor problem.

The / key prints a letter d on the terminal window. If I do shift plus / it closes the terminal.

How do I fix this?

Thanks again/

[grog]

I'm trying to install this onto my poodle (5600), so I don't know if it's even possible. I've successfully installed & configred the package, but I get the following errors:

Code: [Select]

[zaurus@grond]<~/Install_Files/watapon/xqt>$ sudo ipkg -d card install xqt-gtk-jumbopack_0.4.3-0.6_arm.ipk
Unpacking xqt-gtk-jumbopack...Done.
Configuring xqt-gtk-jumbopack.../mnt/card1/packages/usr/lib/ipkg/info/xqt-gtk-jumbopack.postinst: /opt/QtPalmtop/share/
loading libraries ...
generating pango.modules ...
/mnt/card1/packages/usr/lib/ipkg/info/xqt-gtk-jumbopack.postinst: cannot create /etc/pango/pango.modules: directory non
generating gdk-pixbuf.loaders ...
/mnt/card1/packages/usr/lib/ipkg/info/xqt-gtk-jumbopack.postinst: cannot create /etc/gtk-2.0/gdk-pixbuf.loaders: direct
/mnt/card1/packages/usr/lib/ipkg/info/xqt-gtk-jumbopack.postinst: /opt/QtPalmtop/share/bin/mozhomefix: not found
X/Qt installed sucessfully.
Done.After using ipkg-link successfully & restarting qtopia, I have the tab & all the icons, but nothing happens when I hit the startx icon, so I started some command line testing & edited the startx-wrapper, replacing the hdd3 references to point to the ext2 partition of my sd card (where the package is installed). It still failed after running the startx script.

So I edited the startx script to properly assign the hostname (the hostname command is linked to busybox in my rom which doesn't recognoze the '-f' switch). Finally it got the the end but failed finding librarys:

Code: [Select]

[...snip...]
+ xauth list :0
+ grep ':0 '
xauth: error while loading shared libraries: libXmuu.so.1: cannot load shared object file: No such file or directory
+ xauth
xauth: error while loading shared libraries: libXmuu.so.1: cannot load shared object file: No such file or directory
+ removelist=:0
+ xauth list grond:0
xauth: error while loading shared libraries: libXmuu.so.1: cannot load shared object file: No such file or directory
+ grep 'grond:0 '
+ xauth
xauth: error while loading shared libraries: libXmuu.so.1: cannot load shared object file: No such file or directory
+ removelist=grond:0 :0
+ xinit /home/zaurus/.xinitrc -- /home/zaurus/.xserverrc
xinit: error while loading shared libraries: libXmuu.so.1: cannot load shared object file: No such file or directory
+ '[' 'xgrond:0 :0 ' '!=' x ']'
+ xauth remove grond:0 :0
xauth: error while loading shared libraries: libXmuu.so.1: cannot load shared object file: No such file or directory
+ command -v deallocvt
+ deallocvtI found a libXmuu.so.1.0 library linked under /opt/QtPalmtop/libs, so I linked that to ibXmuu.so.1, but still the same error. I'm not a unix programmer, so I'm not sure where xinit & xauth are looking for libs, but all the other *X* libs are in that same directory, so I can't be far off .

Any helpful tips? Am I just missing a package?
Thanks in advance