← previous next →
Pages: 1 2 [3] 4

Author Topic: Where Is The Newbie Guide?  (Read 37293 times)

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Where Is The Newbie Guide?
« Reply #30 on: July 08, 2005, 04:58:29 pm »
Quote
T:\nivv\OZ\simpad>serload.exe blupdater.img
Ready to download file "blupdater.img". Press RESET!

PBL V2.4 20.07.2001
Booting...
================================================
Siemens Switzerland Bootloader V2.5.3 10.06.2003
Running @206Mhz Processor ID 0x6901b118
Press ESC for monitor
Occupied Memory: [0x00004000-0x00008000],[0x00008014-0x0007500c]
Flash Id 0x00000018 at virt adr 0x05000000 Size 0x01000000
No 32Bit Flash detected 0x00000000
FlashImage Checksum 0x05040014-0x05059f11=0x8912ac03 Bootloader Image OK
Fabdata Flash @0x05059f18 Ram @0x00021f18 FABDATA:
MQ200 - Revision ID=2 ...
Initialise PCMCIA Interface... done.
Codec UCB1200 ID:0x1005 Ver.5 Dev.0 Suppl.1 IO 0x00000000
No PCMCIA Card Attached
NO PCMCIA CARD!  -- Use serial IO
Sysinit done
☻Setting baud rate to 115200
♠☻Serial download request
Booting : <NULL>
Serial download entered.
☻☻
Base    : 0xc0208000 Size 2800404 entry:0xc0208000
♠☻[*********************-]  28001286
Load finished ♠
Burn Image with entry at c0208000
Write File to Flash

This image is different in 673213 longwords
Reading Flash ID at 0x08000000...
Write changed blocks to Flash with ID: 0x0018 [0x05080000-0x0532bb28]
+---------+---------+-
**********************

Successfully written !
Done with 127kB/sec
PLEASE RESTART TARGET
......................
♥Calling Monitor

=====================
Monitor:
=====================
Boot from Flash   'f'
Boot from Net     'n'
Power Off         'o'
Erase PSM+Registry'p'
Exit              'q'
Erase Registry    'r'
Erase Flash       'y'
Soft  Reset       's'
Print Fab-String  'w'
->
Logged

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Where Is The Newbie Guide?
« Reply #31 on: July 08, 2005, 05:04:18 pm »
then a reset:
Quote
ncompressing Linux.............................................................                                                                               
... done, booting the kernel.                             
Linux version 2.4.25-vrs2-pxa1-jpm1 (cmartin@nb005) (gcc version 3.3.3) #1 Fri D                                                                               
ec 3 13:23:43 CET 2004                     
CPU: StrongARM-1110 revisi                         
Machine: Simpad               
Warning: bad configuration page, trying to continue                                                   
On node 0 totalpages: 16384                           
zone(0): 16384 pages.                     
zone(1): 0 pages.                 
zone(2): 0 pages.                 
Kernel command line: mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA                                                                               
 root=1f02 noinitrd init=/linuxrc jffs2_orphaned_inodes=delete rootfstype=jffs2                                                                               
mem=64M       
Warning: uninitialized Real Time Clock                                     
Console: colour dummy device 80x30                                 
Calibrating delay loop... 137.21 BogoMIPS                                         
Memory: 64MB = 64MB total                         
Memory: 62656KB available (1722K code, 324K data, 80K                                                     
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)                               
halt -- power             

c
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)so                                                         
Mount cache hash table entries: 512 (order: 0, 4096 bytes)           
jffs2 read <dstaddr> <file> [partname] -- rea
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)                                                             
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)                               
discover -- guess what mach
CPU: Testing write buffer: passltt>                           
POSIX conformance testing by UNIFIX
param     
poke ram <addr> <dword>
Linux NET4.0 for Linux 2.4                         
Based upon Swansea University Computer Society NET3.039reflashinge> -- reads 8 bits                           
Initializing RT netlink socket                     
define_p
CPU clock: 206.400 MHz (59.000                           
 
devfs: boot_options: 0x1                       
JFFS2 version 2.1. © 2001 Red Hat, Inc., designed by Axis Communications AB.                       
boot wince -- boots WinCEg all of flas               
ttySA%d0 at MMIO 0x80050000 (irq = 17) is a SA1100qnx -- boot QNX/Neutrino12 seconds!               
ttySA%d1 at MMIO 0x80010000 (irq = 15) is a SA1100ot addr <address> <size> -- boots a kernel loaded
mq200fb: setmqmode - before reset                                 
FP_PIN_CONTROL set to 20

show add       
param
Console: switching to colour frame buffer device 100x7510000000       
testjffs2         
                 
Search for id:(89 18) interleave(1) type(2)pkernels <partname> [dst] [src] [         
JEDEC: Found no SA1100 flash device at location zeroenable and bind driver to card(s)ache] [icache]0   
SA1100 flash: Found 1 x16 devices at 0x1000000 in 16-bit mode         
0000E59F       
0000   
pef [just_show           
Creating 3 MTD partitions on "SA1100 flash":                                           
0x00000000-0x00080000 : "boot"jffs2 read <dstaddr> <file> [p
0x00080000-0x00180000 : "kernel"                               
Linux Kernel Card Services 3.1.22
  options:  [pm]
SA-1100 PCMCIA (CS release 3.1.22)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
klips_info:ipsec_init: KLIPS startup, Openswan KLIPS IPsec stack version: 2.2.0
klips_info:ipsec_alg_init: KLIPS alg v=0.8.1-0 (EALG_MAX=255, AALG_MAX=251)
klips_info:ipsec_alg_init: calling ipsec_alg_static_init()
ipsec_aes_init(alg_type=15 alg_id=12 name=aes): ret=0
ipsec_aes_init(alg_type=14 alg_id=9 name=aes_mac): ret=0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Mounted root (jffs2 filesystem) readonly.
Mounted devfs on /dev
Freeing init memory: 80K
[: ==: unknown operand
Logged

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Where Is The Newbie Guide?
« Reply #32 on: July 08, 2005, 05:05:49 pm »
good news: I managed to flash blupdater.img, as stated in the previos post
bad news: my simpad wont light the green light, and wont startup.

I guess i killed it.

odd as I followed the steps suggested.

for the record , everything I did is posted here.
« Last Edit: July 09, 2005, 12:42:39 pm by niv »
Logged

Snappy

  • Hero Member
  • *****
  • Posts: 793
    • View Profile
    • http://
Where Is The Newbie Guide?
« Reply #33 on: July 08, 2005, 10:22:55 pm »
so have you done the "Press ESC to drop to boot> " step?
Logged
Snappy!
------------------------
Akita (Daily use)
<span style='font-size:8pt;line-height:100%'>SL-C1000 with Cacko 1.23 full
Accessories: Wifi XI-825 CF  |  16GB (6) SDHC (Transcend) | 1GB 80x CF (RiDATA PRO-2) </span>

Collie (Sandbox)
<span style='font-size:8pt;line-height:100%'>SL-5500 with OZ/GPE 3.5.4.1 alpha3 build 2006-04-27
Accessories: 512MB A-Data SD | 64MB Toshiba SD</span>

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Where Is The Newbie Guide?
« Reply #34 on: July 09, 2005, 01:44:14 pm »
yes- I did
Logged

Snappy

  • Hero Member
  • *****
  • Posts: 793
    • View Profile
    • http://
Where Is The Newbie Guide?
« Reply #35 on: July 09, 2005, 02:26:57 pm »
Quote
good news: I managed to flash blupdater.img, as stated in the previos post
bad news: my simpad wont light the green light, and wont startup.

I guess i killed it.

odd as I followed the steps suggested.

for the record , everything I did is posted here.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=87584\"][{POST_SNAPBACK}][/a][/div]


Don't fear ... yet!  ... open up the back casing. There is one screw *hidden* behind the QC tested sticker on the top right corner. The battery is velcroed to the back cover at the bottom. Remove the battery cable and this should hard reset the unit.

Close back the cover and retry the flashing routine.

EDIT: btw, I cannot seem to find your step where you interrupt the boot sequence and drop to "boot> " in order to flash in the new image (this is not referring to blupdater.img but referring to simpad-rootfs.jffs2). Can you verify?
« Last Edit: July 09, 2005, 02:39:40 pm by Snappy »
Logged
Snappy!
------------------------
Akita (Daily use)
<span style='font-size:8pt;line-height:100%'>SL-C1000 with Cacko 1.23 full
Accessories: Wifi XI-825 CF  |  16GB (6) SDHC (Transcend) | 1GB 80x CF (RiDATA PRO-2) </span>

Collie (Sandbox)
<span style='font-size:8pt;line-height:100%'>SL-5500 with OZ/GPE 3.5.4.1 alpha3 build 2006-04-27
Accessories: 512MB A-Data SD | 64MB Toshiba SD</span>

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Where Is The Newbie Guide?
« Reply #36 on: July 09, 2005, 02:29:45 pm »
open it.
unhooked the battary
still dead
:-(
« Last Edit: July 09, 2005, 02:50:45 pm by niv »
Logged

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Where Is The Newbie Guide?
« Reply #37 on: July 09, 2005, 02:53:40 pm »
post 22

wait, how much time to leave the internal bat unconnected? more then 1 min?
« Last Edit: July 09, 2005, 02:54:38 pm by niv »
Logged

Snappy

  • Hero Member
  • *****
  • Posts: 793
    • View Profile
    • http://
Where Is The Newbie Guide?
« Reply #38 on: July 09, 2005, 03:03:27 pm »
Just awhile should do it. You can also preset the reset button while the battery is unplugged. Then plug back the battery. Close cover. Screw in at least two screws to hold the cover as there are at least 1 or 2 micro switches detecting the cover status.

Plug in AC power. plug in serial cable to SL4 and PC serial port. Start HT. Set to 115,8N1, XON/XOFF. Power up. HT should at least show something.
Logged
Snappy!
------------------------
Akita (Daily use)
<span style='font-size:8pt;line-height:100%'>SL-C1000 with Cacko 1.23 full
Accessories: Wifi XI-825 CF  |  16GB (6) SDHC (Transcend) | 1GB 80x CF (RiDATA PRO-2) </span>

Collie (Sandbox)
<span style='font-size:8pt;line-height:100%'>SL-5500 with OZ/GPE 3.5.4.1 alpha3 build 2006-04-27
Accessories: 512MB A-Data SD | 64MB Toshiba SD</span>

Snappy

  • Hero Member
  • *****
  • Posts: 793
    • View Profile
    • http://
Where Is The Newbie Guide?
« Reply #39 on: July 10, 2005, 08:56:08 am »
So Niv, any status?
Logged
Snappy!
------------------------
Akita (Daily use)
<span style='font-size:8pt;line-height:100%'>SL-C1000 with Cacko 1.23 full
Accessories: Wifi XI-825 CF  |  16GB (6) SDHC (Transcend) | 1GB 80x CF (RiDATA PRO-2) </span>

Collie (Sandbox)
<span style='font-size:8pt;line-height:100%'>SL-5500 with OZ/GPE 3.5.4.1 alpha3 build 2006-04-27
Accessories: 512MB A-Data SD | 64MB Toshiba SD</span>

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Where Is The Newbie Guide?
« Reply #40 on: July 10, 2005, 09:55:37 am »
tried unhooking the bat and leaving it over night.
clicked the reset
hooked bat back
screwed back panel
hooked power
hooked serial

clicked reset
dead -> nothing in the termainl
clicked power green flashed ->nothing to the terminal

Its dead awaitng to be Jtaged.
« Last Edit: July 10, 2005, 09:56:25 am by niv »
Logged

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Where Is The Newbie Guide?
« Reply #41 on: July 10, 2005, 09:56:38 am »
I will now describe what I did:

1. serloaded bootloader 1.4  from source forge : linky

2. flashed 14 mb image from : http://devernay.free.fr/hacks/opensimpad/20050620/images/ got opie up.

3. pressed ESC while booting and flashed simpadSL.rom from: here
4. serloaded simmens 2.5.3 from here
5. reset and pressed y to erase the flash
5. serloaded blupdater.img

I now have a dead simpad.
« Last Edit: July 11, 2005, 01:52:46 pm by niv »
Logged

Snappy

  • Hero Member
  • *****
  • Posts: 793
    • View Profile
    • http://
Where Is The Newbie Guide?
« Reply #42 on: July 10, 2005, 12:53:34 pm »
Can you confirm the comm settings? There are two sets of settings to use, one for the siemens bootloader and the other for the bootloader used by >= 0.9.0.
Logged
Snappy!
------------------------
Akita (Daily use)
<span style='font-size:8pt;line-height:100%'>SL-C1000 with Cacko 1.23 full
Accessories: Wifi XI-825 CF  |  16GB (6) SDHC (Transcend) | 1GB 80x CF (RiDATA PRO-2) </span>

Collie (Sandbox)
<span style='font-size:8pt;line-height:100%'>SL-5500 with OZ/GPE 3.5.4.1 alpha3 build 2006-04-27
Accessories: 512MB A-Data SD | 64MB Toshiba SD</span>

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Where Is The Newbie Guide?
« Reply #43 on: July 10, 2005, 01:52:12 pm »
I tried 3840-8N1 none
3840-8N1 Xon/off
115200 8N1 none
even with Xon/off

while hooked to power
dead as a brick
« Last Edit: July 10, 2005, 01:55:07 pm by niv »
Logged

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Where Is The Newbie Guide?
« Reply #44 on: July 10, 2005, 01:53:49 pm »
oh no
now even the green light doesnt blink
Logged
Pages: 1 2 [3] 4
← previous next →