← previous next →
Pages: [1]

Author Topic: Hentges Doesn't See My Sandisk  (Read 5761 times)

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Hentges Doesn't See My Sandisk
« on: July 08, 2005, 12:44:47 pm »
Hi,
Why is it that the latest 3.5.3 (zImage and opie off OE site) "sees" my connect plus as a storage media - but Hentges opie with the NEW 3.5.3 r21 doesn't ?

Niv
Logged

CoreDump

  • Hero Member
  • *****
  • Posts: 713
    • View Profile
    • http://www.hentges.net
Hentges Doesn't See My Sandisk
« Reply #1 on: July 08, 2005, 04:10:01 pm »
Quote
Hi,
Why is it that the latest 3.5.3 (zImage and opie off OE site) "sees" my connect plus as a storage media - but Hentges opie with the NEW 3.5.3 r21 doesn't ?

Niv
[div align=\"right\"][a href=\"index.php?act=findpost&pid=87541\"][{POST_SNAPBACK}][/a][/div]

Whats the output of "cat /proc/partitions" and "dmesg | grep mmcd"?

What's the exact output (use copy and paste) of "/etc/sdcontrol insert"?
Logged
Webmaster of hentges.net & Embedded Linux Developer.

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Hentges Doesn't See My Sandisk
« Reply #2 on: July 08, 2005, 06:15:58 pm »
cat /proc/partitions:
Quote
major minor  #blocks  name

  60     0      31360 mmcda
  60     1      31328 mmcda1
dmesg | grep mmcd:
Quote
VFS: Disk change detected on device mmcd(60,1)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,1)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,2)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,2)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,2)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,2)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,2)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,2)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,3)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,3)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,3)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,3)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,3)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,3)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,4)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,4)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,4)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,4)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,4)
 mmcda: mmcda1
VFS: Disk change detected on device mmcd(60,4)
 mmcda: mmcda1
/etc/sdcontrol insert:
Quote
Beginning SD auto-mount..:
-> Valid SD partitions are: [mmcda1]

* * * * * Working on [/dev/mmcda1] * * * * *

-> Using mountpoint [/media/card] from fstab
-> Trying VFAT mount [defaults,noauto,noatime,user,exec,suid,quiet,umask=000,iocharset=utf8]...
mount: /dev/mmcda1 already mounted or /media/card busy
mount: according to mtab, /dev/mmcda1 is already mounted on /media/card
-> VFAT mount was successfull
-> EXT2 mount was successfull
« Last Edit: July 08, 2005, 06:27:47 pm by niv »
Logged

CoreDump

  • Hero Member
  • *****
  • Posts: 713
    • View Profile
    • http://www.hentges.net
Hentges Doesn't See My Sandisk
« Reply #3 on: July 09, 2005, 11:23:23 am »
Looks perfectly normal to me. What's the output of "mount" and "df -h" right after a reboot, and after "sdcontrol insert" ?
Logged
Webmaster of hentges.net & Embedded Linux Developer.

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Hentges Doesn't See My Sandisk
« Reply #4 on: July 09, 2005, 03:11:29 pm »
note: I have a 32 mb mmc - so I didn't run cardfs yet.

I clicked a key - and opie didn't load:

mount

/dev/root on / type jffs2 (rw)
proc on /proc type proc (rw)
ramfs on /dev type ramfs (rw)
tmpfs on /var type tmpfs (rw)
devpts on /dev/pts type devpts (rw)
/dev/mmcda1 on /media/card type vfat (rw,noatime,nodev)

and

df -h

Filesystem                Size      Used Available Use% Mounted on
/dev/mtdblock4           14.1M     12.3M      1.8M  87% /
tmpfs                    30.5M     48.0k     30.4M   0% /var
/dev/mmcda1              30.3M     22.0M      8.4M  72% /media/card

no change after /etc/sdcontrol insert
Logged

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Hentges Doesn't See My Sandisk
« Reply #5 on: July 10, 2005, 01:48:57 pm »
any ideas what to do, to fix it?
Logged

CoreDump

  • Hero Member
  • *****
  • Posts: 713
    • View Profile
    • http://www.hentges.net
Hentges Doesn't See My Sandisk
« Reply #6 on: July 11, 2005, 04:36:43 am »
Quote
any ideas what to do, to fix it?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=87759\"][{POST_SNAPBACK}][/a][/div]

Umm, the card is perfectly mounted. I don't see any problem.
Logged
Webmaster of hentges.net & Embedded Linux Developer.

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Hentges Doesn't See My Sandisk
« Reply #7 on: July 11, 2005, 08:07:59 am »
Sorry core, I must be missing something

I mean that a CF card doesn't show - up as mounted.
the card is sandisk connect plus - which does work with the opie of openemmbed download.
Logged

tombraider

  • Sr. Member
  • ****
  • Posts: 409
    • View Profile
    • http://atoah.com/zaurus/
Hentges Doesn't See My Sandisk
« Reply #8 on: July 11, 2005, 10:55:13 am »
Quote
Quote
Hi,
Why is it that the latest 3.5.3 (zImage and opie off OE site) "sees" my connect plus as a storage media - but Hentges opie with the NEW 3.5.3 r21 doesn't ?

Niv
[div align=\"right\"][a href=\"index.php?act=findpost&pid=87541\"][{POST_SNAPBACK}][/a][/div]

Whats the output of "cat /proc/partitions" and "dmesg | grep mmcd"?

What's the exact output (use copy and paste) of "/etc/sdcontrol insert"?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=87572\"][{POST_SNAPBACK}][/a][/div]

I have the SanDisk ConnectPlus card also and the storage part has never worked on any Opie I've tried,  including the Hentges.  I just did a total fresh install of the latest available files for Hentges and it still doesn't recognize the storage part of the card - fortunately,  I got the wireless part to work by installing 3 ipk files.
Logged
Learning Chinese?  Have a Mac?  Try Hanzi Master: Download for free

Tombraider's Zaurus C1000 Tips Web Site

SL-3200 from Conics.net: Sharp ROM| SL-C1000: Pdaxrom Beta 3

sargon666777

  • Newbie
  • *
  • Posts: 1
    • View Profile
Hentges Doesn't See My Sandisk
« Reply #9 on: September 13, 2005, 06:44:40 pm »
I also would like to revive this.  I am fairly new to the Zaurus, and managed to get a Zaurus collie, and a Sandisk connect plus.  On the Hentges rom I am having the exact same problem.  Is there any way to make this card work as both storage media, and WIFI adapter?
Logged

Snappy

  • Hero Member
  • *****
  • Posts: 793
    • View Profile
    • http://
Hentges Doesn't See My Sandisk
« Reply #10 on: September 19, 2005, 10:39:05 pm »
Quote
Quote
Quote
Hi,
Why is it that the latest 3.5.3 (zImage and opie off OE site) "sees" my connect plus as a storage media - but Hentges opie with the NEW 3.5.3 r21 doesn't ?

Niv
[div align=\"right\"][a href=\"index.php?act=findpost&pid=87541\"][{POST_SNAPBACK}][/a][/div]

Whats the output of "cat /proc/partitions" and "dmesg | grep mmcd"?

What's the exact output (use copy and paste) of "/etc/sdcontrol insert"?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=87572\"][{POST_SNAPBACK}][/a][/div]

I have the SanDisk ConnectPlus card also and the storage part has never worked on any Opie I've tried,  including the Hentges.  I just did a total fresh install of the latest available files for Hentges and it still doesn't recognize the storage part of the card - fortunately,  I got the wireless part to work by installing 3 ipk files.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=87869\"][{POST_SNAPBACK}][/a][/div]


Hi Tomb, care to point out the 3 ipks? Thx!
Logged
Snappy!
------------------------
Akita (Daily use)
<span style='font-size:8pt;line-height:100%'>SL-C1000 with Cacko 1.23 full
Accessories: Wifi XI-825 CF  |  16GB (6) SDHC (Transcend) | 1GB 80x CF (RiDATA PRO-2) </span>

Collie (Sandbox)
<span style='font-size:8pt;line-height:100%'>SL-5500 with OZ/GPE 3.5.4.1 alpha3 build 2006-04-27
Accessories: 512MB A-Data SD | 64MB Toshiba SD</span>

h2gofast

  • Newbie
  • *
  • Posts: 33
    • View Profile
Hentges Doesn't See My Sandisk
« Reply #11 on: September 30, 2005, 10:55:29 pm »
Quote
Quote
Quote
Quote
Hi,
Why is it that the latest 3.5.3 (zImage and opie off OE site) "sees" my connect plus as a storage media - but Hentges opie with the NEW 3.5.3 r21 doesn't ?

Niv
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

Whats the output of "cat /proc/partitions" and "dmesg | grep mmcd"?

What's the exact output (use copy and paste) of "/etc/sdcontrol insert"?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=87572\"][{POST_SNAPBACK}][/a][/div]

I have the SanDisk ConnectPlus card also and the storage part has never worked on any Opie I've tried,  including the Hentges.  I just did a total fresh install of the latest available files for Hentges and it still doesn't recognize the storage part of the card - fortunately,  I got the wireless part to work by installing 3 ipk files.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=87869\"][{POST_SNAPBACK}][/a][/div]


Hi Tomb, care to point out the 3 ipks? Thx!
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96341\"][{POST_SNAPBACK}][/a][/div]


Some people seem to be having luck with these cards.  I wonder how well they will run with wellenreiter or kismet.
[a href=\"http://www.dsitri.de/phpBB2/viewforum.php?f=21]sandisk forums[/url]
Logged

lardman

  • Hero Member
  • *****
  • Posts: 4512
    • View Profile
    • http://people.bath.ac.uk/enpsgp/Zaurus/
Hentges Doesn't See My Sandisk
« Reply #12 on: October 01, 2005, 06:05:41 am »
Quote
Is there any way to make this card work as both storage media, and WIFI adapter?

Not at the moment I don't think - there's a kernel patch which is applied to stop one or other part from working (I think it stops the storage part from working) as it's currently unstable/conflicts (from memory, you'll have to look at the monotone notes for the patch).

If you want to do some testing etc., then let me know and I'll see if I can help you with the setup, etc. (though I don't have one of these cards so I won't be doing any development for it).

Quote
Some people seem to be having luck with these cards. I wonder how well they will run with wellenreiter or kismet.

They should work "out of the box" with the latest OZ builds (not sure if this also includes 3.5.3).


Si
« Last Edit: October 01, 2005, 06:06:33 am by lardman »
Logged
C750 OZ3.5.4 (GPE, 2.6.x kernel)
SL5500 OZ3.5.4 (Opie)
Nokia 770
Serial GPS, WCF-12, Socket Ethernet & BT, Ratoc USB
WinXP, Mandriva

tombraider

  • Sr. Member
  • ****
  • Posts: 409
    • View Profile
    • http://atoah.com/zaurus/
Hentges Doesn't See My Sandisk
« Reply #13 on: October 01, 2005, 09:56:26 am »
sorry,  I didn't see this posting before today.  The 3 files are:
hostap-utils_0.3.7-r0_arm.ipk
prism3-firmware_1.8.3-r2_arm.ipk
prism3-support_1.0.0-r0_arm.ipk

I do a clean install and put those files on the cf card or sd card and install them in that order to RAM.  Now I'm not sure if installing to RAM is necessary or not,  but one time I tried the 64-0 config of OZ and installed to sd card and it didn't work ...may have been some other factor involved so I can't say positively that it must be installed to RAM in order to work.

I tried to attach the 3 files to this posting...hope it works.    

Hope this helps.

Quote
Quote
Quote
Quote
Hi,
Why is it that the latest 3.5.3 (zImage and opie off OE site) "sees" my connect plus as a storage media - but Hentges opie with the NEW 3.5.3 r21 doesn't ?

Niv
[div align=\"right\"][a href=\"index.php?act=findpost&pid=87541\"][{POST_SNAPBACK}][/a][/div]

Whats the output of "cat /proc/partitions" and "dmesg | grep mmcd"?

What's the exact output (use copy and paste) of "/etc/sdcontrol insert"?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=87572\"][{POST_SNAPBACK}][/a][/div]

I have the SanDisk ConnectPlus card also and the storage part has never worked on any Opie I've tried,  including the Hentges.  I just did a total fresh install of the latest available files for Hentges and it still doesn't recognize the storage part of the card - fortunately,  I got the wireless part to work by installing 3 ipk files.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=87869\"][{POST_SNAPBACK}][/a][/div]


Hi Tomb, care to point out the 3 ipks? Thx!
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96341\"][{POST_SNAPBACK}][/a][/div]
[attach=989:attachment
Logged
Learning Chinese?  Have a Mac?  Try Hanzi Master: Download for free

Tombraider's Zaurus C1000 Tips Web Site

SL-3200 from Conics.net: Sharp ROM| SL-C1000: Pdaxrom Beta 3

h2gofast

  • Newbie
  • *
  • Posts: 33
    • View Profile
Hentges Doesn't See My Sandisk
« Reply #14 on: October 07, 2005, 11:13:05 pm »
thanks, those did the trick.
Logged
Pages: [1]
← previous next →