Author Topic: So... Wpa1/2 For Tetsu Rom C3000 ?  (Read 3363 times)

daemon1

  • Jr. Member
  • **
  • Posts: 86
    • View Profile
So... Wpa1/2 For Tetsu Rom C3000 ?
« on: November 09, 2005, 04:36:52 pm »
I have 2 CF cards, a semi-working D-Link DCF-660 and and ambicom WL1000C, both are Prism 2 and are versions 1.7.4 and 1.8.0 luckily....

I have a C3000 with Testu's atty kernel v17i.

Would the hostap_supplicant work for my config? do i need to recompile the modules and then point the pcmcia config to load them?

what type of wpa works ? I have wpa2 personal running on an apple airport extreme ap..

ive seen numerous posts on how to update the firmware to 1.7.0+ and how to do this on OZ or cacko.. but not sharp/tetsu kernels...
C3000 - Debian EABI - Kernel 2.6.23 of Angstrom

Da_Blitz

  • Hero Member
  • *****
  • Posts: 1579
    • View Profile
    • http://www.pocketnix.org
So... Wpa1/2 For Tetsu Rom C3000 ?
« Reply #1 on: November 10, 2005, 05:40:52 am »
cacko people are normally running tetsu's kernel

as for wpa, try the sharp rom fourm, i remeber posting somthing in there about wpa for someone who got it working or was it the OE fourm?

the latest OE has hostap built in and so does the latest cako that is not running on the c3k yet, (unless its happened in the last 2 days i havent been here)
Personal Blog
Code
Twitter

Gemini Order: #95 (roughly)
Current Device: Samsung Chromebook Gen 3
Current Arm Devices Count: ~30
Looking to acquire: Cavium Thunder X2 Hardware

Hrw

  • Hero Member
  • *****
  • Posts: 1366
    • View Profile
So... Wpa1/2 For Tetsu Rom C3000 ?
« Reply #2 on: November 10, 2005, 06:10:39 am »
Da_Blitz: latest OZ can have hostap built but not latest OE which is build enviroment not distro.
OpenZaurus 3.5.4x Release Manager
OpenEmbedded, Ångström, Poky developer
My website

Misc embedded hardware.

Da_Blitz

  • Hero Member
  • *****
  • Posts: 1579
    • View Profile
    • http://www.pocketnix.org
So... Wpa1/2 For Tetsu Rom C3000 ?
« Reply #3 on: November 12, 2005, 12:13:17 am »
my bad
Personal Blog
Code
Twitter

Gemini Order: #95 (roughly)
Current Device: Samsung Chromebook Gen 3
Current Arm Devices Count: ~30
Looking to acquire: Cavium Thunder X2 Hardware

T-RuX

  • Jr. Member
  • **
  • Posts: 73
    • View Profile
So... Wpa1/2 For Tetsu Rom C3000 ?
« Reply #4 on: November 12, 2005, 05:04:34 am »
a small error  we use OE for build the system more frecuentily than OZ in the zaurus  (I only for test jejej)

daemon1

  • Jr. Member
  • **
  • Posts: 86
    • View Profile
So... Wpa1/2 For Tetsu Rom C3000 ?
« Reply #5 on: November 14, 2005, 01:53:25 am »
Quote
cacko people are normally running tetsu's kernel

as for wpa, try the sharp rom fourm, i remeber posting somthing in there about wpa for someone who got it working or was it the OE fourm?

the latest OE has hostap built in and so does the latest cako that is not running on the c3k yet, (unless its happened in the last 2 days i havent been here)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=103095\"][{POST_SNAPBACK}][/a][/div]

thanks da_blitz, but have you a link for a working solution to use WPA with sharp rom ?
C3000 - Debian EABI - Kernel 2.6.23 of Angstrom

Da_Blitz

  • Hero Member
  • *****
  • Posts: 1579
    • View Profile
    • http://www.pocketnix.org
So... Wpa1/2 For Tetsu Rom C3000 ?
« Reply #6 on: November 18, 2005, 02:52:08 am »
link: https://www.oesf.org/forums/index.php?showtopic=10699

look on the net for a how to on setting up WPA
all you have to do is find the WPA modules  i belive there were some on the OZ feeds for 3.5.3
Personal Blog
Code
Twitter

Gemini Order: #95 (roughly)
Current Device: Samsung Chromebook Gen 3
Current Arm Devices Count: ~30
Looking to acquire: Cavium Thunder X2 Hardware