← previous next →
Pages: [1]

Author Topic: Modifying Zaurus Cradle  (Read 6213 times)

gamemastermischa

  • Newbie
  • *
  • Posts: 12
    • View Profile
    • http://
Modifying Zaurus Cradle
« on: January 12, 2006, 06:02:24 am »
Greetings,

I seem to recall that there is a possibility to modify the cradle for the 5500 to also charge the zaurus on the USB connector only. Can anyone verify this? If so, I could use directions to the appropriate website, I cannot seem to find it.

Gamemaster
Logged

hvontres

  • Full Member
  • ***
  • Posts: 118
    • View Profile
    • http://
Modifying Zaurus Cradle
« Reply #1 on: January 12, 2006, 01:37:01 pm »
Quote
Greetings,

I seem to recall that there is a possibility to modify the cradle for the 5500 to also charge the zaurus on the USB connector only. Can anyone verify this? If so, I could use directions to the appropriate website, I cannot seem to find it.

Gamemaster
[div align=\"right\"][a href=\"index.php?act=findpost&pid=110615\"][{POST_SNAPBACK}][/a][/div]

I was able to modify my spare 5600 Cradle to be USB powered. I added a jumper from the USB 5V pin to an unused 5V pad. I don't have any pictures right now, but it is definitely possible. I have NOT tried this cradle with the charger plugged in. You might fry you PC's usb port, I am not sure.

Hope this helps.
Logged
[span style=\'font-size:10pt;line-height:100%\']Henry von Tresckow[/span]
--------------------------------------
SL-5600, OZ 3.5.4.2 (Hentges), Kernel 2.6.17 :)
1gb Kingston SD (ext2), 5Gb Seagate ST1 (3.03 Fw, fat32)
256 MB Kingston SD (ext2),256MB Viking CF,32MB CF (vfat),
homebuilt GPS unit (Based on RFMD RF 8000)

Ferret-Simpson

  • Hero Member
  • *****
  • Posts: 572
    • View Profile
Modifying Zaurus Cradle
« Reply #2 on: January 12, 2006, 02:10:57 pm »
Quote
I have NOT tried this cradle with the charger plugged in. You might fry you PC's usb port, I am not sure.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=110677\"][{POST_SNAPBACK}][/a][/div]

Solder a diode across the jump instead. That way, You won't kill the +5v at least. hmm. . . You might fry the Zaurus though, if that pad links in serially. If it does, then your Z will get a nice 10V current up it's ass. . . Remember the post about the Fuse change in the Z power stage?

That will be you

Sorry. . Don't mean to be pedantic or anything XD
Logged
Cortana: PXA250/Poodle: OZ/GPE 3.4.2RC1
Tycho PXA270/HTC_Universal WM5  .30.107/1.09.00/42.42.P8/1.30.162
HollyWatch: Fossil AU5005 - POS 4.1.2
ATLANTIS: Fujitsu Lifebook T4210 TBPC2005

Tosh256CF, Adlink CF 802.11B, 512KingSD, 128VikSD, CFChiMeiG1GPRS

hvontres

  • Full Member
  • ***
  • Posts: 118
    • View Profile
    • http://
Modifying Zaurus Cradle
« Reply #3 on: January 12, 2006, 07:42:00 pm »
Quote
Quote
I have NOT tried this cradle with the charger plugged in. You might fry you PC's usb port, I am not sure.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=110677\"][{POST_SNAPBACK}][/a][/div]

Solder a diode across the jump instead. That way, You won't kill the +5v at least. hmm. . . You might fry the Zaurus though, if that pad links in serially. If it does, then your Z will get a nice 10V current up it's ass. . . Remember the post about the Fuse change in the Z power stage?

That will be you

Sorry. . Don't mean to be pedantic or anything XD
[div align=\"right\"][a href=\"index.php?act=findpost&pid=110681\"][{POST_SNAPBACK}][/a][/div]
Unrotunately the 0.7V drop across the diode is enough to make the Z unhappy...  I tried this before and wound up removing the diode.
Logged
[span style=\'font-size:10pt;line-height:100%\']Henry von Tresckow[/span]
--------------------------------------
SL-5600, OZ 3.5.4.2 (Hentges), Kernel 2.6.17 :)
1gb Kingston SD (ext2), 5Gb Seagate ST1 (3.03 Fw, fat32)
256 MB Kingston SD (ext2),256MB Viking CF,32MB CF (vfat),
homebuilt GPS unit (Based on RFMD RF 8000)

Lisa

  • Newbie
  • *
  • Posts: 3
    • View Profile
Modifying Zaurus Cradle
« Reply #4 on: February 25, 2006, 03:16:02 am »
I purchased a usb to zaurus cable off ebay that also charges the zaurus. works nice, also picked up a 12v to usb charger for the cigarette lighter port in the car.
Logged

EzerchE

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
Modifying Zaurus Cradle
« Reply #5 on: April 02, 2006, 11:41:37 am »
I have zaurus sl-5600 but i dont have adapteur, how can i charge it via cradle with usb port?

@hvontres can you post the pics please?

thanks.
Logged

EzerchE

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
Modifying Zaurus Cradle
« Reply #6 on: April 02, 2006, 12:30:57 pm »
Ok i did it
Logged

EzerchE

  • Jr. Member
  • **
  • Posts: 56
    • View Profile
Modifying Zaurus Cradle
« Reply #7 on: April 02, 2006, 07:27:54 pm »
i can charge it now, but i think i have a problem now,

pc softwares and usb drivers succesfully installed but when i try to enter file transfer or other options(sync, backup) it gives an error. here is the screenshot:

[img]http://img98.imageshack.us/img98/8535/error8kx.jpg\" border=\"0\" class=\"linked-image\" /]

can i solve this problem? thanks.
Logged
Pages: [1]
← previous next →