Author Topic: Scalable VNC for Z-5500 (Read 5002 times)

Devz · « **on:** February 16, 2004, 06:27:01 am »

Does anyone know of a scalable VNC client for the Z?

Any help would be appreciated

- Devz

oreo · « **Reply #1 on:** February 16, 2004, 08:28:16 am »

I use keypebble.
http://www.killefiz.de/zaurus/showdetail.php?app=186

kutscher · « **Reply #2 on:** February 19, 2004, 03:29:38 pm »

Is that possible to have KeyPebble in Landscape view for the SL-C7x0 / 860 series?

zbones · « **Reply #3 on:** February 19, 2004, 03:49:11 pm »

Yep, it works great.
Make sure you get the one from the sharp feed, if you are using a sharp based rom.
Peter

kutscher · « **Reply #4 on:** February 19, 2004, 05:02:09 pm »

Hmmm.... sorry I\'m a newbie.

Where could I find one? That is the one that I\'ve got:
http://www.killefiz.de/zaurus/showdetail.php?app=186

Which has a \"5x00\" look and feel. No Landscape orientation.

Tks!

Quote

Yep, it works great.
Make sure you get the one from the sharp feed, if you are using a sharp based rom.
Peter

zbones · « **Reply #5 on:** February 20, 2004, 03:13:54 am »

Tap and hold the icon.

Remove the tick from the \"display with magnified screen\" box.
Peter.

Devz · « **Reply #6 on:** February 21, 2004, 07:07:05 am »

I use Keypebble too. But its not scalable i.e. your Zaurus VNC viewer cannot display the entire desktop that the VNC server is sending, so that the user can monitor the entire screen, and zoom in/out depending on need.

- Devz

zbones · « **Reply #7 on:** February 21, 2004, 11:09:55 am »

This one is re-scalable http://pocketworkstation.org/fbvnc.html

But you have to exit qtopia to get it to work.

Devz · « **Reply #8 on:** March 02, 2004, 01:36:15 am »

Thanks heaps zbones!!

Much appreciated

Another (commercial) product i was going to begin looking into was WinConnect Z.
Pretty much a Remote Desktop client for NT/XP servers/workstations.

- Devz

lardman · « **Reply #9 on:** March 02, 2004, 04:39:54 am »

I think the latest version of keypebble in the OZ3.3.6pre1 feed allows you to set the scaling when you start up (but you may not be able to change it \'on the fly\').

Si

Devz · « **Reply #10 on:** March 29, 2004, 06:02:49 pm »

Yep, the latest opie-keypebble is able to be set to use a scale per connection.

With opie-keypebble & fbvnc is the perfect solution for both GUI and non GUI vnc\'ing with the Zaurus.

Thanks to everyone who submitted posts relative to this subject.
Hope it helped out more people than just myself.

- Devz

treke · « **Reply #11 on:** March 29, 2004, 06:10:09 pm »

The keypebble implementation could use work if anyone cared to do so. There are some servers that support scalling on the server side which would be much faster to use on the zaurus. The palm server can do this, and I think tight can also.

News:

Author Topic: Scalable VNC for Z-5500 (Read 5002 times)