← previous next →
Pages: 1 ... 14 15 [16] 17 18 ... 25

Author Topic: Pdaxrom For C3000 (based On Beta1/beta3)  (Read 123981 times)

Jon_J

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
    • http://
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #225 on: February 08, 2007, 01:46:05 pm »
I haven't installed pdaxii13-akita-5.3 yet.
Maybe it will help fix my screencap/scrot issue.
I looked inside the full spitz 5.2 image and it's setup is completely different than just installing scrot/screencap+depends separately.

Back on topic, I'll install akita-5.3 later today and report any differences here.
I currently have last akita-5.2 (just before 5.3) with latest fix, then a later rc.rofilesys

EDIT: I'm not going to try to "upgrade" to pdaxii13-spitz-full
I'm just going to try to install all additional packages & utilities separately.

Jon
« Last Edit: February 08, 2007, 01:47:45 pm by Jon_J »
Logged
C3100 Multiboot-->Angstrom 2007.12-r18 | Cacko 1.23 | ArchLinuxARM
C3200 pdaxii13v2-5.5-alpha4 Akita on NAND
Ambicom WL1100C-CF Wifi - Ambicom CF modem - Ambicom CF GPS - Belkin-F5D5050 USB LAN
Socket CF Bluetooth rev K - Iogear 4 port USB micro hub - pocket CF card reader
Targus mini USB optical mouse - 2 Targus SD card readers

danboid

  • Hero Member
  • *****
  • Posts: 881
    • View Profile
    • http://
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #226 on: February 08, 2007, 02:21:45 pm »
What I'm interested in is is it now possible to upgrade ii13A 5.3a to the full hdimage version successfully, if the module dependencies error is now fixed and the unwanted X USB keyboard shortcut keys have been removed. Has anyone tried these already?

yar meanar-

So what would be the drawbacks of having the Module Dependencies boot check fail, if any?
« Last Edit: February 08, 2007, 02:25:47 pm by danboid »
Logged
Zaurus SL-C3000 w/ MD swapped for a Kingston 32GB Ultimate 266X CF running ALARM
Banana Pi running ALARM on a WD Scorpio SATA II HD
System76 Gazelle Pro i7 laptop w/ SAMSUNG 840 EVO SSD running Arch x64

How to install Arch on your C3x00 Zaurus https://github.com/danboid/ZALARM-install

Jon_J

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
    • http://
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #227 on: February 08, 2007, 02:44:03 pm »
I just installed pdaxii13-akita-5.3 (opps, I had 5.5 there, I corrected it)
here's the bootup message, starting from Welcome.
Code: [Select]
Welcome to pdaxii13 on Sharp Zaurus

cardmgr[443]: socket 0: ATA/IDE Fixed Disk
cardmgr[443]: socket 1: ATA/IDE Fixed Disk
Set loopback device                                     [OK]
Hostname: zaurus                                        [OK]
/etc/rc.d/rc.sysinit: line 04: 579 Floating Point exceptiondepmod -q 2>/dev/null >/dev/null
Setup console font                                      [OK]
INIT: Entering runlevel: 5
Starting SD services                                    [OK]
Starting sshd:                                          [OK]
Loading USBHost modules                                 [OK]
Starting Bluetooth                                      [OK]
Starting smbd...
Starting nmbd...
Starting system message bus:                            [OK]

pdaxii13 build5.3 "Sally"I'm not sure what the error about rc.sysinit: line 04 means just yet. This error line replaces the "module dependencies" [FAILED] line.
"exceptiondepmod" appears to be 2 words run together, that's not a typo.
Also, upon first boot from the flash menu, pdaxii13 asks if you want to format hdc2 as swap and asks if you want to format hdc3 as fat. This is on my C3200 with both CF and SD cards inserted. (other wise it would be hda2 & hda3)
I haven't done anything else, I'm going to do my usual utility installs and change that clock to AM/PM
Also it didn't mount my fat hdc3 partition automatically.
One last edit here, I found another typing mistake.
« Last Edit: February 08, 2007, 03:03:16 pm by Jon_J »
Logged
C3100 Multiboot-->Angstrom 2007.12-r18 | Cacko 1.23 | ArchLinuxARM
C3200 pdaxii13v2-5.5-alpha4 Akita on NAND
Ambicom WL1100C-CF Wifi - Ambicom CF modem - Ambicom CF GPS - Belkin-F5D5050 USB LAN
Socket CF Bluetooth rev K - Iogear 4 port USB micro hub - pocket CF card reader
Targus mini USB optical mouse - 2 Targus SD card readers

Jon_J

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
    • http://
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #228 on: February 08, 2007, 05:21:07 pm »
Some more observations of pdaxii13-akita-5.3 installed on a C3200.
I just mounted hdc3 and after checking with mount, it is ext3 (rw)
But when I checked it with sfdisk -l it showed as Win95 FAT32 (LBA)
Looks like I'm going back into pdaxii setup and reformatting my drives.
It won't open with "Storage mode" either in Windows.
Repartitioning the drive in the pdaxii13-akita installer also causes the installer to reflash the ROM when you select Reboot [Yes] after the drive is partitioned, (if you use the partitioning with the recommended selection).

After the ROM flashed, I rebooted and while the screen went black, I took out my CF card this time.
The installer then asked if I wanted to format hda2 as swap, I said [NO]
The installer then asked if I wanted to format hda3 as FAT, I said [NO]
pdaxii13 booted to GUI, I opened a console and issued mount:
/dev/hda1 on /mnt/ide/ type ext3 (rw, noatime)
/dev/hda3 on /mnt/data type vfat (rw, noatime, nosuid, nodev)

I'll keep it this way for now. Darn, I just had all my utilities installed. Starting over..
Internal storage now works ("Drive mode")
« Last Edit: February 08, 2007, 05:22:03 pm by Jon_J »
Logged
C3100 Multiboot-->Angstrom 2007.12-r18 | Cacko 1.23 | ArchLinuxARM
C3200 pdaxii13v2-5.5-alpha4 Akita on NAND
Ambicom WL1100C-CF Wifi - Ambicom CF modem - Ambicom CF GPS - Belkin-F5D5050 USB LAN
Socket CF Bluetooth rev K - Iogear 4 port USB micro hub - pocket CF card reader
Targus mini USB optical mouse - 2 Targus SD card readers

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #229 on: February 08, 2007, 06:05:41 pm »
found a bug (wrong format of partition in post install script). i am going to rebuild the image and reupload later today...
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

danboid

  • Hero Member
  • *****
  • Posts: 881
    • View Profile
    • http://
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #230 on: February 08, 2007, 06:25:44 pm »
Hear ye hear ye, especially Meestah Menay. danboids wishlist will likely proceed as follows

1

A working Free Energy system

2

Teleportation

3

Transcend 4D spacetime

4

Become one with all that is

5

Meesatah Meeenoo releases zgcc 5.3 with a working autoconf!

I tried recompiling/installing M4 and autoconf but to no avail which means I still can't compile any svn stuff- like the new Frodo svn C64 emu with a 320x240 SDL interface that I've been dying to try!  

Please Menaie!
« Last Edit: February 08, 2007, 06:27:53 pm by danboid »
Logged
Zaurus SL-C3000 w/ MD swapped for a Kingston 32GB Ultimate 266X CF running ALARM
Banana Pi running ALARM on a WD Scorpio SATA II HD
System76 Gazelle Pro i7 laptop w/ SAMSUNG 840 EVO SSD running Arch x64

How to install Arch on your C3x00 Zaurus https://github.com/danboid/ZALARM-install

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #231 on: February 09, 2007, 05:42:28 pm »
folks... may I present to you pdaXii13 Spitz (Alice) 5.3

this release is still located in the beta section but considered quite stable since I have been testing it for awhile. this image is mainly just for convennience since people with 5.2 can just upgrade by installing all the packages mentioned here:
http://www.tyrannozaurus.com/?q=node/210
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #232 on: February 09, 2007, 05:47:26 pm »
btw, i updated initrd.bin to fix the little bug mentioned by pycoman. you can either reflash the latest image or just install the little patch he posted. its a very simple fix. the decision is up to you...
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

jpmatrix

  • Hero Member
  • *****
  • Posts: 1014
    • View Profile
    • http://matrixmen.free.fr
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #233 on: February 09, 2007, 06:45:37 pm »
meanie,

i've tried to ssh from my pc to my zaurus, and it kept asking me for the root password.... same thing if i try with the zaurus user...
any help ?

ps:this has be done via an over-the-air openvpn connection via umts to my adsl pc network ! (but ping is ok but nothing else seem to respond...)
Logged
**Fujitsu U1010 !!!  
**ex-Zaurus SL-C3000 owner with Debian kernel 2.6.24-yonggun

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #234 on: February 09, 2007, 07:04:52 pm »
Quote
meanie,

i've tried to ssh from my pc to my zaurus, and it kept asking me for the root password.... same thing if i try with the zaurus user...
any help ?

ps:this has be done via an over-the-air openvpn connection via umts to my adsl pc network ! (but ping is ok but nothing else seem to respond...)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=153669\"][{POST_SNAPBACK}][/a][/div]

root and zaurus user by default do not have a password set. you should set a different password for each user.

ssh will not allow a user that has no password to login. this is a good security measure. also, most ssh daemons won't allow root to login by default which also is a good security measure. however, you can change these default security measures by modidifying sshd.conf and disabling them. remember that these measures are there to protect you. if you decide to disable them, then people could ssh into your zaurus and format your partitions if they are malicious...
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

jpmatrix

  • Hero Member
  • *****
  • Posts: 1014
    • View Profile
    • http://matrixmen.free.fr
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #235 on: February 14, 2007, 11:43:19 am »
another bug":

unhappily i've to say that rotation is not working on my pdaxii13-5.2-package-enhanced-to-5.3 ... nothing happen although i've installed latest rotate package... neither rotating the screen nor choosing rotate in menu....
any help?

i tried /usr/bin/rotate too, nothing happen, no error message ...
Logged
**Fujitsu U1010 !!!  
**ex-Zaurus SL-C3000 owner with Debian kernel 2.6.24-yonggun

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #236 on: February 24, 2007, 03:35:23 pm »
pdaXii13 5.3.1 (Alice) beta us now available for testing...  except for danboid who is cursed by the wince witches...
« Last Edit: February 24, 2007, 04:57:29 pm by Meanie »
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

tanjian2

  • Jr. Member
  • **
  • Posts: 98
    • View Profile
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #237 on: February 24, 2007, 06:16:25 pm »
Quote
pdaXii13 5.3.1 (Alice) beta us now available for testing...  except for danboid who is cursed by the wince witches...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155178\"][{POST_SNAPBACK}][/a][/div]
Whats new and/or fixed in 5.3.1?
Logged
SL-C3000(Spitz) - pdaXii13 5.5alpha + sound enhanced kernel - MD in 1 great big partition -  Ambicom CF Wifi + USB Ethernet  and NOW Zubuntu on a 4Gb SD

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #238 on: February 25, 2007, 06:46:23 am »
Quote
Quote
pdaXii13 5.3.1 (Alice) beta us now available for testing...  except for danboid who is cursed by the wince witches...
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]
Whats new and/or fixed in 5.3.1?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155186\"][{POST_SNAPBACK}][/a][/div]

in short, 5.3.1 is a bug fix for 5.3

the following lists changes between 5.2 and 5.3.x [a href=\"http://www.tyrannozaurus.com/?q=node/210]http://www.tyrannozaurus.com/?q=node/210[/url]

the following is new to 5.3.1:
 
enhanced rox-backdrop so it can switch back to plain background image only
enhanced the rotate script so that it will not call rox-backdrop if it is not installed or enabled
updated mplayer to latest atty build
added xfe, linneighbourhood, medit, smplayer, pcmanfm,streamtuner/streamripper,gsnapshot
updated card applet with daniel's enhancements
added mime type associations for zip (xarchiver) and flash (mplayer) files in rox
increased default font size in dillo
made links in sylpheed use dillo instead of firefox
fixed missing dependencies for updated xmms which now also supports mod files
hidden the toolsbars by default in gnumeric
added desktop icons for rox
added ability to disable scim and stickykeys
you can switch between openbox and fluxbox usinf xselect
« Last Edit: February 25, 2007, 06:48:46 am by Meanie »
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

jpmatrix

  • Hero Member
  • *****
  • Posts: 1014
    • View Profile
    • http://matrixmen.free.fr
Pdaxrom For C3000 (based On Beta1/beta3)
« Reply #239 on: February 25, 2007, 07:28:43 am »
Quote
pdaXii13 5.3.1 (Alice) beta us now available for testing...  except for danboid who is cursed by the wince witches...
[div align=\"right\"][a href=\"index.php?act=findpost&pid=155178\"][{POST_SNAPBACK}][/a][/div]

great!
should we still consider it a beta or is it working really good?
Logged
**Fujitsu U1010 !!!  
**ex-Zaurus SL-C3000 owner with Debian kernel 2.6.24-yonggun
Pages: 1 ... 14 15 [16] 17 18 ... 25
← previous next →