← previous next →
Pages: 1 ... 4 5 [6] 7 8 ... 10

Author Topic: OK, Now the Real New Cacko Qtopia ROM  (Read 68639 times)

zbones

  • Sr. Member
  • ****
  • Posts: 459
    • View Profile
OK, Now the Real New Cacko Qtopia ROM
« Reply #75 on: March 09, 2004, 05:51:59 pm »
Quote
Hardware zoom buttons won\'t work for me in Konsole. They work everywhere else, however. Konsole is jus plain stuck with a 36 pt character set.

If you installed the new cacko QT rom from this thread, then it uses qkonsole which does support the hardware zoom buttons, or at least it does on my c760.

The conf file is Qkonsole.conf in /home/zaurus/Settings.

The mapping of the euro key to fn-5 breaks the use of fn-5 to switch between fullscreen and windowed mode however. I will have to try keyhelper again.

Peter.
Logged
Zaurus cl760, cacko QT rom. Zaurus sl5500 with TKCrom 1.0.
512mb Kingston cf card, 256mb Sandisk sd card, Lexar 256mb sd card.
Bluemonkey bluetooth card <-> Sony Ericsson k700i for gprs.
Buffalo WLI-CF-S11G wifi card. Haicom 303 mmf gps cf/seral card.

maslovsky

  • Hero Member
  • *****
  • Posts: 1426
    • View Profile
    • http://my-zaurus.narod.ru
OK, Now the Real New Cacko Qtopia ROM
« Reply #76 on: March 10, 2004, 01:40:03 am »
Quote
I am still trying to get Wellenreiter working with the new Cacko 1.20 ROM.  I got some new ipk files via javab0y, but they don\'t seem to work.  

I\'m using welenreiter 0.9.9 from this feed:
http://www.vanille.de/feed/sharp/

Make sure to start wellenreiter when you have an active connection, because wellenreiter cannot handle a suspended card. Or do from console:

Code: [Select]
su

cardctl scheme qpewlan0

cardctl reset

..and then start wellenterier.

Quote
I am using the Ambicon CF1100 card.  I can get the card to work with the wlan-ng prisim drivers and, by doing the file switching technique outlined above, they will also work with the hermes file and the orinoco drivers.  Wellenreiter says my card isn\'t configured correctly no matter which set I use.  Both sets work for regular connections and kismet.  I tired the host-ap drivers but my Ambicon card won\'t work for any connection with host-ap.  Does some script need to be run to activate host-ap.  Any ideas on how to get Wellenreiter working would be appreciated.  

I have exatly same card working with HostAp drivers. What is exactly wrong with it when using these drivers? Does it get recognised?

Quote
I heard a new distribution compiled for the Cacko ROM should be out in a few days--is that true?

Well, I heard that too from Mikey. He told me he was going to build 1.0.3 this weekend. Obviousely that did not happen...
Logged

maslovsky

  • Hero Member
  • *****
  • Posts: 1426
    • View Profile
    • http://my-zaurus.narod.ru
OK, Now the Real New Cacko Qtopia ROM
« Reply #77 on: March 10, 2004, 01:42:08 am »
Quote
I installed the intermediate built of 1.20 ROM (It\'s very nice!!!) and I wrote some contacts, TODO and appointments in PIM applications. Now I would install the official release. Can I do a backup, install the definitive built and restore my datas without problems or can I copy in the SD the files made by the PIM applications and then restore them?  
In the last case, what and where these files are?

The best would be to sync with Windows before flashing an updated ROM. After flashing you sync again and you\'ll get your PIM data back.

If synching is not a option, you can save /home/zaurus/Applications/dtm directory and then coy it back to the new ROM.
Logged

maslovsky

  • Hero Member
  • *****
  • Posts: 1426
    • View Profile
    • http://my-zaurus.narod.ru
OK, Now the Real New Cacko Qtopia ROM
« Reply #78 on: March 10, 2004, 01:46:16 am »
Quote
I use a BT CF by DAIKOM (detected as CSR Bluecore 2 UART adapter) and I set a GPRS connection via my Siemens S55 for dial-up using Setting/network. It seems that it\'s all Ok. The applet says \"connected\" and pressing \"i\" button it gives right connection params (DNS, GW etc...), but if I try to use mail or browser (Opera or NF), I can\'t access to internet. NF, for example, says \"TCP write error\". Anyone can help me?

Very strange. Can you ping a site manualy from console?

ex. ping google.com

What does it say?

What output do you see from ifconfig command?
Logged

maslovsky

  • Hero Member
  • *****
  • Posts: 1426
    • View Profile
    • http://my-zaurus.narod.ru
OK, Now the Real New Cacko Qtopia ROM
« Reply #79 on: March 10, 2004, 06:01:21 am »
Quote
I noticed that new ROM lacks Russian phonetic keyboard layout (it was included in intermediate release). Any chance to post that file somewhere to be available for download???  

Here you go.
Logged

toadatrix

  • Jr. Member
  • **
  • Posts: 72
    • View Profile
    • http://
OK, Now the Real New Cacko Qtopia ROM
« Reply #80 on: March 10, 2004, 08:34:52 am »
See here for how I finally got Wellenreiter working with the new ROM.  Maybe this will help some others:

http://www.zaurususergroup.com/index.php?n...iewtopic&t=2355
Logged

Anonymous

  • Guest
OK, Now the Real New Cacko Qtopia ROM
« Reply #81 on: March 11, 2004, 04:31:27 pm »
Anonymous wrote:
]]]I noticed that new ROM lacks Russian phonetic keyboard layout (it was included in intermediate release). Any chance to post ]]]that file somewhere to be available for download???
 

]]Here you go.


There is no link... How can I get to the file?

Thanks!
Logged

offroadgeek

  • Administrator
  • Hero Member
  • *****
  • Posts: 1419
    • View Profile
    • https://www.oesf.org
OK, Now the Real New Cacko Qtopia ROM
« Reply #82 on: March 11, 2004, 09:46:03 pm »
Quote
Anonymous wrote:  
]]]I noticed that new ROM lacks Russian phonetic keyboard layout (it was included in intermediate release). Any chance to post ]]]that file somewhere to be available for download???  
  

]]Here you go.  


There is no link... How can I get to the file?

Thanks!

the file was attached directly to the post... look below the text \"here you go\" and you\'ll see a box with the details of the file and a link to the right saying\"download\"
Logged
Search the OESF Wiki
C1000 w/Cacko 1.23 beta (from Streamline) / 760 pdaxrom rc9 / 6000L (thanks Santa's elf!) / 5500 - OZ 3.3.5 / SIMpad SL4
1GB, 256mb SanDisk CF / 2x 1GB, 512mb, 256mb, 128mb SanDisk SD
Ambicom WL100C-CF wifi / Socket 56k CF modem / AmbiCom BT2000-CF (x2)
Pocketop keyboard, Piel Frama case (1000 & 5500), PDAir case (760 & 1000)
sip:536093@fwd.pulver.com
| OESF | ELSI | Zaurus User Group | ZaurusThemes |

offroadgeek

  • Administrator
  • Hero Member
  • *****
  • Posts: 1419
    • View Profile
    • https://www.oesf.org
OK, Now the Real New Cacko Qtopia ROM
« Reply #83 on: March 11, 2004, 09:50:05 pm »
Quote
See here for how I finally got Wellenreiter working with the new ROM.  Maybe this will help some others:
https://www.oesf.org/forums/index.php?showtopic=2355

damn!  wish I saw that before I did this on my own in the wiki yesterday  

oh well.. can\'t ever have enough documentation!

btw - here\'s a link to the wiki page:

ZUG How-To Docs -] Applications -] Wellenreiter...
Logged
Search the OESF Wiki
C1000 w/Cacko 1.23 beta (from Streamline) / 760 pdaxrom rc9 / 6000L (thanks Santa's elf!) / 5500 - OZ 3.3.5 / SIMpad SL4
1GB, 256mb SanDisk CF / 2x 1GB, 512mb, 256mb, 128mb SanDisk SD
Ambicom WL100C-CF wifi / Socket 56k CF modem / AmbiCom BT2000-CF (x2)
Pocketop keyboard, Piel Frama case (1000 & 5500), PDAir case (760 & 1000)
sip:536093@fwd.pulver.com
| OESF | ELSI | Zaurus User Group | ZaurusThemes |

vishnja

  • Full Member
  • ***
  • Posts: 135
    • View Profile
    • http://
OK, Now the Real New Cacko Qtopia ROM
« Reply #84 on: March 14, 2004, 06:18:19 am »
Quote
Actualy even Intel itself overclocks its processors - how else do you name selling the same processor with a different multiplier? Pentium 4 2.4 and Pentium 4 3.0 have abs0olutely no difference other than multiplier. But look at their prices...

In the \"old\" days I was told that the chips went through a quality check and the ones with the better qualtity got the higher clock rate. That was the risk then, see how far you could push your  own hardware. I don\'t know how it\'s done now.

What I don\'t really get in all these horror scenarios: don\'t people actually measure the temperature? How can you burn up your Laptop etc? They just overclock the hardware and leave it alone?  :?:
Logged
C860 with Cacko 1.21 \"Elena\" ROM,
pretec wlan cf, nokia bt cf, ratoc usb host cf, socket lan cf,
sandisk 512 cf/sd, kingston 256 cf

rlackey

  • Newbie
  • *
  • Posts: 7
    • View Profile
    • http://www.psd-ltd.com
OK, Now the Real New Cacko Qtopia ROM
« Reply #85 on: March 14, 2004, 03:19:36 pm »
All was going well (Cacko Qtopia ROM) ... but the Package Manager has developed a problem. It won\'t install packages anymore ... I get \"ipkg says something went wrong. Sorry\". Even if I uninstall a package which was previously installed, it won\'t reinstall. Does anyone know how to fix this? A Reboot does not help.

Thanks
Logged
C700 - Cacko ROM 1.21a - Viking 256 SD - AmbiCom CF WiFi - Kingston 512MB CF

ScottYelich

  • Hero Member
  • *****
  • Posts: 992
    • View Profile
    • http://www.zaurususergroup.com/modules.php?opmodload&namephpWiki&filei
OK, Now the Real New Cacko Qtopia ROM
« Reply #86 on: March 14, 2004, 04:58:06 pm »
run ipkg install blah
manually, answer the questions... when it\'s done, go back to the gui version..

Scott
Logged

fourfun

  • Newbie
  • *
  • Posts: 6
    • View Profile
    • http://
OK, Now the Real New Cacko Qtopia ROM
« Reply #87 on: March 15, 2004, 12:56:14 am »
Has anyone had a problem with Windows not recognizing mass storage correctly with Daniela?
Logged
Charles Jordan aka fourfun
C760 with Cacko ROM
Panasonic 512mb SD
SimpleTech 256 CF
Linksys WCF12

abednego

  • Newbie
  • *
  • Posts: 7
    • View Profile
    • http://
OK, Now the Real New Cacko Qtopia ROM
« Reply #88 on: March 15, 2004, 03:52:29 am »
Yupp.
No sweat.
Open up the pc-link-applet, select network, press ok and plug your zaurus into some linux or windows box. Wait a moment until the Z has initialized the network and stuff, then unplug it again, reopen pc-link and select storage. That\'s what worked in my case. The problem seems to be that in \"virgin\" (just installed) condition, the storage_fd module doesn\'t seem to load.

Good luck,
Abed
Logged

Anonymous

  • Guest
OK, Now the Real New Cacko Qtopia ROM
« Reply #89 on: March 15, 2004, 05:08:32 am »
Is there any home page for this rom (well... except here of course!!)?

www.cacko.biz has become the pdaxrom page.
Logged
Pages: 1 ... 4 5 [6] 7 8 ... 10
← previous next →