Hello
I have quite strange problem I cannot solve. Recently I got (as christmas gift from my wife) Windows Mobile 5 smarphone Samsung SGH i310. I am trying to get Zaurus DUN to Internet through Bluetooth Billlonton CF card. I had working Internet connection with Sony Eriscon T610 without any problem also Nokia 6230i without problem except connection last only 1 minute (I think problem in Nokia BT module). I got both working through PPP Modem config application. So I thought everything will be the same also with SGH i310. I was very wrong!
First I tried this config application and in Modem tab searched for BT device. I got " Can't get DUN info.
So i tried to hack it manually! Tried...
# hcitool scan
Scanning ...
00:17:D5:1B:84:F0 misik
OK I see mobile
# sdptool search DUN
Inquiring ...
Searching for DUN on 00:17:D5:1B:84:F0 ...
Service Name: Dial-up Networking
Service RecHandle: 0x10007
Service Class ID List:
"Dialup Networking" (0x1103)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 4
Language Base Attr List:
code_ISO639: 0x656e
encoding: 0x6a
base_offset: 0x100
Profile Descriptor List:
"Dialup Networking" (0x1103)
Version: 0x0100
#
So DUN is there... on channel 4. So I manually edited
# cat /home/root/Choices/common/Network-PPP-Samsung.conf
[Info]
name = Samsung
[Properties]
BTDUN = 00:17:D5:1B:84:F0,4
Bluetooth = 1
IrDA = 0
Serial = 0
atdial = at+cgdcont=1,"IP","internet"
connectdelay = 6000
crtscts = 1
defaultroute = 1
device = /dev/rfcomm0
dialmode = 0
dns1 =
dns2 =
gateway =
idletime = 120
password =
phone = *99***1#
speed = 115200
usepeerdns = 1
username =
#
and
# cat /etc/ppp/peers/Samsung
/dev/rfcomm0
115200
connect "/usr/sbin/chat -v -f /etc/chatscripts/gprs"
#crtscts
noipdefault
usepeerdns
defaultroute
local
connect-delay 6000
remotename Samsung
#
# cat /etc/chatscripts/gprs
'' ATZ OK
AT+CGDCONT=1,"IP","internet"
OK "ATD*99***1#"
CONNECT ''
#
I paired devices with
hcitool cc OK
but when I try to connect with pppd
pppd debug call Samsung
I will get in /var log messages ....
Dec 9 00:55:25 pppd[5254]: pppd 2.4.3 started by root, uid 0
Dec 9 00:55:26 hcid[860]: link_key_request (sba=00:10:60:AA:4A:D1, dba=00:17:D5:1B:84:F0)
Dec 9 00:55:26 chat[5255]: send (ATZ^M)
Dec 9 00:55:26 chat[5255]: expect (OK)
Dec 9 00:55:26 chat[5255]: ATZ^M^M
Dec 9 00:55:26 chat[5255]: OK
Dec 9 00:55:26 chat[5255]: -- got it
Dec 9 00:55:26 chat[5255]: send (AT+CGDCONT=1,"IP","internet"^M)
Dec 9 00:55:26 chat[5255]: expect (OK)
Dec 9 00:55:26 chat[5255]: ^M
Dec 9 00:55:27 chat[5255]: AT+CGDCONT=1,"IP","internet"^M^M
Dec 9 00:55:27 chat[5255]: OK
Dec 9 00:55:27 chat[5255]: -- got it
Dec 9 00:55:27 chat[5255]: send (ATD*99***1#^M)
Dec 9 00:55:27 chat[5255]: expect (CONNECT)
Dec 9 00:55:27 chat[5255]: ^M
Dec 9 00:55:28 chat[5255]: ATD*99***1#^M^M
Dec 9 00:55:28 chat[5255]: CONNECT
Dec 9 00:55:28 chat[5255]: -- got it
Dec 9 00:55:28 chat[5255]: send (^M)
Dec 9 00:55:28 pppd[5254]: Serial connection established.
Dec 9 00:55:28 pppd[5254]: using channel 29
Dec 9 00:55:28 pppd[5254]: Using interface ppp0
Dec 9 00:55:28 pppd[5254]: Connect: ppp0 <--> /dev/rfcomm0
Dec 9 00:55:28 /etc/hotplug/net.agent: assuming ppp0 is already up
Dec 9 00:55:34 pppd[5254]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x9189b7d> <pcomp> <accomp>]
Dec 9 00:55:34 pppd[5254]: rcvd [LCP ConfReq id=0x1 <mru 1300> <asyncmap 0xa0000> <auth pap>]
Dec 9 00:55:34 pppd[5254]: No auth is possible
Dec 9 00:55:34 pppd[5254]: sent [LCP ConfRej id=0x1 <auth pap>]
Dec 9 00:55:34 pppd[5254]: rcvd [LCP ConfRej id=0x1 <pcomp> <accomp>]
Dec 9 00:55:34 pppd[5254]: sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x9189b7d>]
Dec 9 00:55:34 pppd[5254]: rcvd [LCP ConfReq id=0x2 <mru 1300> <asyncmap 0xa0000>]
Dec 9 00:55:34 pppd[5254]: sent [LCP ConfAck id=0x2 <mru 1300> <asyncmap 0xa0000>]
Dec 9 00:55:34 pppd[5254]: rcvd [LCP ConfNak id=0x2 <asyncmap 0xa0000>]
Dec 9 00:55:34 pppd[5254]: sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x9189b7d>]
Dec 9 00:55:37 pppd[5254]: sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x9189b7d>]
Dec 9 00:55:40 pppd[5254]: sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x9189b7d>]
Dec 9 00:55:43 pppd[5254]: sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x9189b7d>]
Dec 9 00:55:46 pppd[5254]: sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x9189b7d>]
Dec 9 00:55:49 pppd[5254]: sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x9189b7d>]
Dec 9 00:55:52 pppd[5254]: sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x9189b7d>]
Dec 9 00:55:55 pppd[5254]: sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x9189b7d>]
Dec 9 00:55:58 pppd[5254]: sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x9189b7d>]
Dec 9 00:56:01 pppd[5254]: sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x9189b7d>]
Dec 9 00:56:04 pppd[5254]: LCP: timeout sending Config-Requests
Dec 9 00:56:04 pppd[5254]: Connection terminated.
Dec 9 00:56:04 chat[5272]: send (ATZ^M)
Dec 9 00:56:04 chat[5272]: expect (OK)
Dec 9 00:56:05 /etc/hotplug/net.agent: NET unregister event not supported
You would tell ... wrong phone .......
BUT from M$ Windows XP (my notebook) with _same_ Billionton BT card in PCMCIA reduction EVERYTHING WORKS just from scratch without any problem. So I think Win XP has other options in pppd which zaurus does not have.
Please help me. Where I am doing mistake? What obscured option in pppd I have to turn on to get it working?
Thnx much for any clue or help.
PS: Internet direcctly from phone also works OK.
Another configs:
# cat /etc/bluetooth/hcid.conf
#
# HCI daemon configuration file.
#
# $Id: hcid.conf,v 1.3 2002/07/18 18:12:46 maxk Exp $
#
# HCId options
options {
# Automatically initialize new devices
autoinit yes;
# Security Manager mode
# none - Security manager disabled
# auto - Use local PIN for incoming connections
# user - Always ask user for a PIN
#
security auto;
# Pairing mode
# none - Pairing disabled
# multi - Allow pairing with already paired devices
# once - Pair once and deny successive attempts
pairing multi;
# PIN helper
pin_helper /bin/bluepin;
}
# Default settings for HCI devices
device {
# Local device name
# %d - device id
# %h - host name
name "BlueZ (%d)";
# Local device class
class 0x120114;
# Default packet type
#pkt_type DH1,DM1,HV1;
# Inquiry and Page scan
iscan enable; pscan enable;
# Default link mode
# none - no specific policy
# accept - always accept incoming connections
# master - become master on incoming connections,
# deny role switch on outgoing connections
#
#lm accept,master;
#
lm accept;
# Default link policy
# none - no specific policy
# rswitch - allow role switch
# hold - allow hold mode
# sniff - allow sniff mode
# park - allow park mode
#
#lp hold,sniff;
#
lp hold,sniff,park;
# Authentication and Encryption
#auth enable;
#encrypt enable;
}
#
# cat /etc/bluetooth/rfcomm.conf
rfcomm0 {
bind yes;
device 00:17:D5:1B:84:F0;
channel 4;
comment "Generated by BT dial-up network applet.";
}
#
