Socket Bluetooth (debian Eabi)

[Raul]

I've read some of the topics about Socket Bluetooth and Debian Tichy. I have Version G and still cannot get it to work properly.

Someone wrote that: " 'hciattach /dev/ttyS4 bcsp' works." but it doesn't for me.
Maybe I should try with setserial? Does it exist for Debian Eabi?

The only positive is that after inserting the card it responds with:
ttyS0: detected caps 00000700 should be 00000100
1.0: ttyS4 at I/O 0xc48403f8 (irq = 169) is a 16C950/954

Thanks for any help.

Kind regards,
Raul

[Vitel]

Maybe I should try with setserial?

Exactly! Try this:

Code: [Select]

setserial /dev/ttyS4 baud_base 921600
hciattach /dev/ttyS4 bcsp

[pelrun]

Or just try this instead:

Code: [Select]

hciattach /dev/ttyS4 socket

[Raul]

Or just try this instead:

Code: [Select]

hciattach /dev/ttyS4 socket

When i tried with socket i've got:
bcsp-recv: Out-of-order packed arrived, got 1 expected 0
bcsp-recv: Error in BSCP hdr checksum

[Raul]

Maybe I should try with setserial?

Exactly! Try this:

Code: [Select]

setserial /dev/ttyS4 baud_base 921600
hciattach /dev/ttyS4 bcsp

After hciattach /dev/ttyS4 bcsp I've got:
BCSP initialization timed out

[pelrun]

When i tried with socket i've got:
bcsp-recv: Out-of-order packed arrived, got 1 expected 0
bcsp-recv: Error in BSCP hdr checksum

Sure, but what does hciconfig say? I get those errors on occasion but it doesn't stop the interface from coming up.

However it does tend to spew those errors continually to the log after a suspend/resume until I kill and restart hciattach.

[Raul]

Sure, but what does hciconfig say? I get those errors on occasion but it doesn't stop the interface from coming up.

However it does tend to spew those errors continually to the log after a suspend/resume until I kill and restart hciattach.

hciconfig show nothing at all.

[Raul]

I've found a nice web page about the problem with Socket Bletooth card rev. G
http://www.adamis.de/linux/bt-socket.html

There is even a patch:
Patch for serial 8250
Does anyone knows if zaurus kernels have this patch already?

That's why probably some of you had a problem with getting better transfers than 9-10kb/s.

[stupkid]

I've found a nice web page about the problem with Socket Bletooth card rev. G
http://www.adamis.de/linux/bt-socket.html

There is even a patch:
Patch for serial 8250
Does anyone knows if zaurus kernels have this patch already?

That's why probably some of you had a problem with getting better transfers than 9-10kb/s.

My Rev G Socket Card works like a champ on Cacko and PdaXRom, but those are 2.4 kernel...

[Raul]

My Rev G Socket Card works like a champ on Cacko and PdaXRom, but those are 2.4 kernel...

I've had Cacko and pdaXii before and it was working quite nice.

[Raul]

I've found other solution but I'm not good at compiling Kernel.
Patch for Socket Bluetooth