Author Topic: quicklaunch, or "could not locate application" (Read 3924 times)

tobias · « **on:** March 23, 2004, 03:35:02 am »

I have a problem with opieftp and a couple of oter applications: when i
try to start them, all I get is a window saying \"could not locate
application: opieftp\" Seems to me that /mnt/card/opt/QtPalmtop/opieftp
is a symlink to ./quicklaunch, which doesn\'t exist. So i understand the
error, but what can i do ?

Regards, Tobias

Mickeyl · « **Reply #1 on:** March 23, 2004, 06:04:15 am »

Mickeyl · « **Reply #2 on:** March 23, 2004, 06:04:27 am »

Relink opieftp to /opt/QtPalmtop/bin/quicklauncher

tobias · « **Reply #3 on:** March 23, 2004, 06:18:46 am »

Thank you. That helped me a step further. Now, i can start opieplayer2,
but oxygen and opieftp still won\'t run, and opieplayer2 won\'t play my
mp3. I click on the file in the audio-tab, click on play, the skin
(default) is loaded, and I\'m back to the tab view.

Any idea where i might get that oss lib from ?
Here\'s what i get on the console :

root@openzaurus:~# opieftp
QuickLauncher invoked as: opieftp
Could not create application main window
root@openzaurus:~# oxygen
QuickLauncher invoked as: oxygen
Could not create application main window
root@openzaurus:~# opieplayer2
QuickLauncher invoked as: opieplayer2
Lib::run() started
Lib
/! This is xine-lib 1.0beta12 compiled by buildroot and patched by Dilb
(don\'t forget to give this information when reporting a bug) /!
SkinLoader::start() 2 jobs
load_plugins: failed to load audio output plugin <oss>
yuv2rgb: using arm4l assembler for colorspace transform
Lib::run() finished
new loader 1 jobs left
load bgpixmap
finished step
load upimage
finished step
load downimage
finished step
load button masks 0
finished step
load button masks 1
finished step
load button masks 2
finished step
load button masks 3
finished step
load button masks 4
finished step
load button masks 5
finished step
load button masks 6
finished step
load whole mask
finished step
all jobs done
SkinLoader::~SkinLoader()
SkinCache: hit
SkinCache: hit on bgpixmap
SkinCache: hit
SkinCache: hit on bgpixmap
<<FILENAME: /mnt/card/Documents/mp3/Bon Jovi, Runaway.mp3>>>>
HAS AUDIO
CONNECT SET POSTION
File: /mnt/card/Documents/mp3/Bon Jovi, Runaway.mp3, Length: 3:52
<<<<<<<height 16, width 632, text width 558 68
<<<<<<<<<<<<<<<<<stop for filelists
<<<<<<<< STOP IN LIB TRIGGERED >>>>>>>
root@openzaurus:~/

Mickeyl · « **Reply #4 on:** March 23, 2004, 08:14:27 am »

opieplayer2 doesn\'t play audio in OZ 3.3.5. This is a known errata which has been corrected in OZ 3.3.6-pre1

tobias · « **Reply #5 on:** March 23, 2004, 08:49:49 am »

so you would recommend updating to OZ 3.3.6-pre1 ? Is there a way to do that without flashing my Zaurus ?
Or should i download a initrd and zimage from http://www.openzaurus.org/official/experim...860/3.3.6-pre1/ and use the ipk directory there as the only feed ?

Regards, Tobias

BTW, your location says \'Germany\' woher denn ? Ich bin zur Zeit zwischen Sttutgart und Ulm, und studiere in GÃ¶ttingen

Mickeyl · « **Reply #6 on:** March 23, 2004, 11:15:51 am »

OZ 3.3.6-pre1 is compiled with gcc3, so the only chance is completely flashing, because you can\'t mix gcc2 and gcc3 applications. Then again, you\'re not compatible to other feeds, so you have to decide.

Frankfurt am Main.

tobias · « **Reply #7 on:** March 24, 2004, 01:56:25 am »

Ok, last night i installed OZ 3.3.6-pre1, an this morning 3.3.5 again. The problem was : a hell lot of segfaults (during a mv, a dd, a lot of graphical applications, the package installer, ...) a extremely bad touchpad example :
This is what i drew | This is what i saw
................................................................................
.............................................###
............................................# #
...........................................# ####
.###########...................#...#....####............# # ..
......................................... # # # #
.....................................................### #
..........................................................# #
...........................................................# #
..................................................###........................
segfaults during the install of opieplayer2, and :
root@openzaurus:~# oxygen
QuickLauncher invoked as: oxygen
Could not create application main window

lardman · « **Reply #8 on:** March 24, 2004, 04:56:40 am »

What are you running on?

tobias · « **Reply #9 on:** March 24, 2004, 06:14:53 am »

I have a C700, and handwriting / drawing works fine under 3.3.5, just no opieplayer and no oxygen :-(

News:

Author Topic: quicklaunch, or "could not locate application" (Read 3924 times)