Cacko Zaurus Qtopia ROM 1.21 is available!

[PsionX]

Opera doesn\'t find the Proxy

Can you post your Proxies.conf  

Here is goes.

Code: [Select]

[Common]

[Info]

[Properties]

autoconfig =

ftphost =

ftpport = 8080

httphost = sdcproxy.mos.elsterus.com

httpport = 8080

noproxies =

type = 2

\"type=2\".. Good ! It\'s my problem.. My Proxies.conf shows \"type=1\".. with \"2\", it works. But QTopia rewrites the file.. so i made a script with a good proxy file, such as \"cd... cp ProxiesO.conf Proxies.conf & opera\"
But, it isn\'t a \"good\" solution  :?

[maslovsky]

I have no idea why Qtopia overwrites your conf file... What do you use for network connection? WiFI, Ethernet CF card, etc/

[PsionX]

I have no idea why Qtopia overwrites your conf file... What do you use for network connection? WiFI, Ethernet CF card, etc/

Wifi Asus WL-110.. in my WLAN.conf, i have at bottom :
.../..
httport=8080
noproxiesback=
noproxycheck=0
type=1
.../...

not 2 ?? and you ??

[maslovsky]

I have no idea why Qtopia overwrites your conf file... What do you use for network connection? WiFI, Ethernet CF card, etc/

Wifi Asus WL-110.. in my WLAN.conf, i have at bottom :
.../..
httport=8080
noproxiesback=
noproxycheck=0
type=1
.../...

not 2 ?? and you ??

I have type=2

[PsionX]

I change  WLAN.conf (type=1 ] 2), now it works
+
I change keyhelper.conf to switched off & keyhelper.xml to have all \"french accent\" é,è,à,ç.....
+
change Opera fonts to verdana (height=16)...
+
change Skin of Mediaplayer

Wonderful ROM, wonderful PDA.. life is beautiful

[stupkid]

Has anyone been able to successfully do IR transfers on the ew ROM?  On my c860 it was working, but has stopped since the upgrade from 1.20 to 1.21.  I haven\'t done extensive research on the issue yet, but I will soon.

Thanks,

[lenk]

Hi...got some problem finding menu 5. I am using C760. I did steps 1 to 10 with no problems. After I choose 2 for step 10. I get a warning sign asking me whether I want to flash or not( its in japanese, I guess thats what it says) Should I press OK? Will it then move me to another menu to be able to choose 5 to flash the partition? Thanks

LK


1. Extract the 3 files - initrd.bin tools.tar updater.sh - to the root of your CF or SD/MMC card.
2. Make sure that Zaurus isn\'t plugged into AC power.
3. Remove battery for at least 5 seconds.
4. Replace battery (replace battery cover, lock cover), plug in AC power.
5. Press and hold the \"OK\" button on the keyboard.
6. Turn the power on, you should see the Japanese service menu.
7. Now Plug in the Power Cord. (You will get an error if it isn\'t plugged in!)
8. Select option 4 (flash/update).
9. You then have four options (1. USB, 2. CF, 3. SD, 4. Back)
10. Choose either option 2 or 3, depending on which media you put the files on.

11. Select \"5 Flash repartition\", enter 27 when prompted for root partition size.
12. Flash will be repartioned and Zaurus will reboot.

13. Repeate steps 2-10 again and wait for the menu start menu.
13. Now select \"1 Install new ROM\" and wait - Zaurus will reboot.

[cowbean]

Would anyone be kind enough to post success stories along with instructions on how to get the Ambicom BT2000E (rounded, solid black top) Bluetooth CF working with a fresh flashing of this ROM?  I\'m following the how-to instructions found on this site, with the non-preempt bluez ipk (not sure what is not being preempted, but the preempt package generates errors during install).

I seem to have the same difficulties as described in this post:

http://www.zaurususergroup.com/index.php?n...onfig+inquiring

Also, does anyone know a way to backup and restore wlan configurations (ssid\'s, WEP keys, etc) across rom flashes?

Finally, does anyone else have this problem with opera whereby \'g\' does not open up the \"open url\" dialog?  functionality was there in the 1.20 ROM

sorry if any of these questions don\'t belong in this topic; will move them if necessary.

thanks!

[maslovsky]

Hi...got some problem finding menu 5. I am using C760. I did steps 1 to 10 with no problems. After I choose 2 for step 10. I get a warning sign asking me whether I want to flash or not( its in japanese, I guess thats what it says) Should I press OK? Will it then move me to another menu to be able to choose 5 to flash the partition? Thanks

Yes, that\'s a confirmation message, to which you should answer YES.

[maslovsky]

Would anyone be kind enough to post success stories along with instructions on how to get the Ambicom BT2000E (rounded, solid black top) Bluetooth CF working with a fresh flashing of this ROM? I\'m following the how-to instructions found on this site, with the non-preempt bluez ipk (not sure what is not being preempted, but the preempt package generates errors during install).

Most bluetooth CF cards, including Ambicom BT2000E are supported out of the box. You don\'t need to install any additional packages and/or edit any configuration files. Just insert the card and go to network setting to configure your bluetooth connection.

Also, does anyone know a way to backup and restore wlan configurations (ssid\'s, WEP keys, etc) across rom flashes?

Network setting are stored in /home/zaurus/Applications/network directory. You can back it up and then restore to the new ROM.

Note: After you restore your settings, make sure to open your settings in the network setup application and click OK button. This will update nessesary configuration files. If you just copy the files, it will not work!

Finally, does anyone else have this problem with opera whereby \'g\' does not open up the \"open url\" dialog? functionality was there in the 1.20 ROM

This is a known bug in Opera build included in this ROM. It was discovered too late to be fixed.

[maslovsky]

I change  WLAN.conf (type=1 ] 2), now it works
+
I change keyhelper.conf to switched off & keyhelper.xml to have all \"french accent\" é,è,à,ç.....
+
change Opera fonts to verdana (height=16)...
+
change Skin of Mediaplayer

Wonderful ROM, wonderful PDA.. life is beautiful

I\'m glad it works for you now

Can you send me your keyhelper.xml file, so that I can include your \"french accent\" into the next ROM update?

[cowbean]

Most bluetooth CF cards, including Ambicom BT2000E are supported out of the box. You don\'t need to install any additional packages and/or edit any configuration files. Just insert the card and go to network setting to configure your bluetooth connection.

oh neat!  so.... how do i search for discoverable devices?  like my t628 phone?


thanks for the quick, yet satisfying answers to my newbie questions!  

[cowbean]

oh neat!  so.... how do i search for discoverable devices?  like my t628 phone?

oh wait, i figured it out... without all the bluez stuff, sdptool works great.    

amazing how the obvious little things stay obscured the longest.


thanks again!

[lenk]

Thank Mas! Nice ROM. If I were to flash pdaXrom would the 27MB partition be a problem? What is this 27MB partition anyway and why do we need it? Thanks

LK

[stupkid]

There is no /dev/irda0 device file on this ROM.  I see in dmesg that the device is registered \"IrDA: Registered device irda0\", but no device.  I only see /dev/ircomm.  I also have been unable to change the settings of any of the sysctl stuff under /proc/sys/net/irda like \"# echo 1000]/proc/sys/net/irda/min_tx_turn_time\".  When I try to beam files from the file manager I see a big red X and \"IrDA is not enabled\".  Does anyone know the Major/Minor numbers for /dev/irda0 or am I completely missing something?

Thanks!