Author Topic: SubApplet 1.0.8  (Read 4792 times)

tecknobabble

  • Newbie
  • *
  • Posts: 26
    • View Profile
    • http://
SubApplet 1.0.8
« on: May 03, 2004, 04:24:34 pm »
Minor update to the previous 1.0.7 release.

The 1.0.8 release incorporates some minor GUI tweaks along with a postrm script that will unhide any applets that the subapplet was managing when the package is uninstalled.

Release available from here


If you\'ve got 1.0.7 already installed there\'s probably not much reason for upgrading.
SL-5500, Own custom Crow-like ROM, DLink DCF-660W, Pocketop Keyboard, assorted no-name CF/SD cards.

SubApplet extender and maintainer, ditto for TaskList applet and Missile Command

xamindar

  • Hero Member
  • *****
  • Posts: 803
    • View Profile
    • http://www.radnimax.com
SubApplet 1.0.8
« Reply #1 on: May 03, 2004, 04:34:16 pm »
Cool, I love this little sub applet.  Thanks for making it.  
SL-C3100 happily Dualbooting Japanese Rom 1.02 and Debian Eabi
Replaced internal CF with 8gb seagate cf hard drive
Ambicom CF GPS
CyberPower battery powered USB hub
D-link DCF-650W (MAN THIS THING IS HUGE!!)

tecknobabble

  • Newbie
  • *
  • Posts: 26
    • View Profile
    • http://
SubApplet 1.0.8
« Reply #2 on: May 03, 2004, 04:40:17 pm »
Quote
Cool, I love this little sub applet.  Thanks for making it.  :)

Well cwaig proved it could be done in a discussion on the old community site and I took it from there....
SL-5500, Own custom Crow-like ROM, DLink DCF-660W, Pocketop Keyboard, assorted no-name CF/SD cards.

SubApplet extender and maintainer, ditto for TaskList applet and Missile Command

Hrw

  • Hero Member
  • *****
  • Posts: 1366
    • View Profile
SubApplet 1.0.8
« Reply #3 on: May 04, 2004, 04:20:55 am »
I got it build using OpenEmbedded - needed files sent to OE list.
OpenZaurus 3.5.4x Release Manager
OpenEmbedded, Ångström, Poky developer
My website

Misc embedded hardware.

tedbundyjr

  • Newbie
  • *
  • Posts: 11
    • View Profile
    • http://
SubApplet 1.0.8
« Reply #4 on: May 04, 2004, 10:31:33 am »
i\'m having a problem on installing subapplet v1.0.7 previously on oz v336. I\'ve tried the subapplet on tkc rom before, cool applet. Keep up the good work. Feel free to advise me. Thanks

tecknobabble

  • Newbie
  • *
  • Posts: 26
    • View Profile
    • http://
SubApplet 1.0.8
« Reply #5 on: May 04, 2004, 01:47:12 pm »
Quote
i\'m having a problem on installing subapplet v1.0.7 previously on oz v336. I\'ve tried the subapplet on tkc rom before, cool applet. Keep up the good work. Feel free to advise me. Thanks

Well the guy who\'s post is just above you is more active in the OZ/OE side of things than I am has built at least an OZ3.3.6pre1 ipk of the 1.0.7 SubApplet.    I have a copy of that ipk at the sourceforge site, and you can find his website here.  Some of the gui tweaks are those he did for the 1.0.7 OE version.
SL-5500, Own custom Crow-like ROM, DLink DCF-660W, Pocketop Keyboard, assorted no-name CF/SD cards.

SubApplet extender and maintainer, ditto for TaskList applet and Missile Command

orthogonal

  • Newbie
  • *
  • Posts: 34
    • View Profile
SubApplet 1.0.8
« Reply #6 on: May 04, 2004, 05:25:09 pm »
One problem I had with subapplet (otherwise an excelelnt applet) is that the \"chevron\" icons are too tall -- they increase the heeight of the taskbar a few pixels beyond the size of the qtopa icon, at least on teh 5600 --, and is wider than I like, taking space from other applets or running applications.

I fixed this simply by scaling the two icons subapplet uses.
Sharp Zaurus 5600  \"Special ROM\" 1.3   Ambicomm WL1100C CF Wifi  SanDisk 512MB SD

tedbundyjr

  • Newbie
  • *
  • Posts: 11
    • View Profile
    • http://
SubApplet 1.0.8
« Reply #7 on: May 04, 2004, 09:25:17 pm »
thanks tecknobabble. I\'ve went to the http://www.hrw.one.pl/zaurus/ before. what do you mean by \"Tweaked SubApplet package for OpenZaurus 3.3.6-pre1 (or other systems based on GCC 3.x) (may be hard to install)\"?

I\'ve tried to install using ipkg but there is a problem.

ipkg install -d sd subapplet_1.0.7-r0_arm.ipk
Cannot find package subapplet_1.0.7-r0_arm.ipk.
Check the spelling or perhaps run \'ipkg update\'

Guide appreciated.

Hrw

  • Hero Member
  • *****
  • Posts: 1366
    • View Profile
SubApplet 1.0.8
« Reply #8 on: May 05, 2004, 04:45:30 am »
ipkg 0.99.85 from OZ 3.3.6-pre1 suxx totally.

You have few choices:
1. install ipkg 0.99.121 from OE
2. unpack ipk on desktop and move files by hand
3. move ipk into Documents/ and install using aqpkg from \"Local packages\"
4. create feed with this ipk

First choice is the best.
OpenZaurus 3.5.4x Release Manager
OpenEmbedded, Ångström, Poky developer
My website

Misc embedded hardware.

tecknobabble

  • Newbie
  • *
  • Posts: 26
    • View Profile
    • http://
SubApplet 1.0.8
« Reply #9 on: May 05, 2004, 04:39:38 pm »
Quote
thanks tecknobabble. I\'ve went to the http://www.hrw.one.pl/zaurus/ before. what do you mean by \"Tweaked SubApplet package for OpenZaurus 3.3.6-pre1 (or other systems based on GCC 3.x) (may be hard to install)\"?

I\'ve tried to install using ipkg but there is a problem.

ipkg install -d sd subapplet_1.0.7-r0_arm.ipk  
Cannot find package subapplet_1.0.7-r0_arm.ipk.
Check the spelling or perhaps run \'ipkg update\'

Guide appreciated.

Worse case do it by hand.  A copy of the OZ3.3.6pre1 ipk I was sent is on sourceforge: subapplet_1.0.7-oz336pre1_arm.ipk.

As I recall OZ uses ar archives, so you can then do:

Code: [Select]
cd /tmp

ar xvf subapplet_1.0.7-oz336pre1_arm.ipk


which will give you 3 files, of which the data.tar.gz file is the most important.  Here\'s a list of its contents:

Code: [Select]
tar ztf data.tar.gz

./opt/

./opt/QtPalmtop/

./opt/QtPalmtop/pics/

./opt/QtPalmtop/pics/subapplet/

./opt/QtPalmtop/pics/subapplet/2downarrow.png

./opt/QtPalmtop/pics/subapplet/2uparrow.png

./opt/QtPalmtop/pics/subapplet/button_ok.png

./opt/QtPalmtop/pics/subapplet/info.png

./opt/QtPalmtop/pics/subapplet/button_cancel.png

./opt/QtPalmtop/plugins/

./opt/QtPalmtop/plugins/applets/

./opt/QtPalmtop/plugins/applets/libsubapplet.so.1.0

./opt/QtPalmtop/plugins/applets/libsubapplet.so.1.0

./opt/QtPalmtop/plugins/applets/libsubapplet.so

./opt/QtPalmtop/plugins/applets/libsubapplet.so.1


Place the pics in the appropriate pics location and the shared library and its links in their place.  Don\'t have an OZ/OE zaurus yet, but you should find that /opt/QtPalmtop is either a real dir or a symbolic link to somewhere..... Reboot the zaurus.... Bob, will then be your sister\'s brother.... Hopefully    Any OZ/OE wielding zaurus person will hopefully correct any inaccuracies.....
SL-5500, Own custom Crow-like ROM, DLink DCF-660W, Pocketop Keyboard, assorted no-name CF/SD cards.

SubApplet extender and maintainer, ditto for TaskList applet and Missile Command

Miami_Bob

  • Sr. Member
  • ****
  • Posts: 483
    • View Profile
SubApplet 1.0.8
« Reply #10 on: May 05, 2004, 05:05:57 pm »
On C860 stock Sharp ROM c/ English language mods by Dynamism.

Subapplet v1.0.7 in both rotation modes

Config screen is cut off about half way throught the slider bar. Applet \"box\" is same size as other screens just nothing showing below the \"cut off\" line.

Otherwise - magnifique!


Bob W
Miami FL
Bob W - Miami FL
--------------------
"The legs of the duck are short and
 cannot be lengthened without distress
 to the duck.

The legs of the crane are long and
 cannot be shortened without distress
 to the crane."

Chuang-tzu

--------------------
C860 main - Sharp 1.40 JP ROM
Language conversion by hand

alts: Cacko 1.22 / OZ 3.5.1 / pdaXrom
512Mb SanDisk SD (x2) / 512Mb SanDisk CF (x2)
Lexar 1Gb CF / AmbiCom WL1100C-CF 802.11b WiFi

Out of Hp200LX, from HP100LX, via HP95LX
--------------------
Desktop MegaTower c/ twin DataPort HD racks;
12 removable HDs with multi OSs - no waiting.

--------------------

tecknobabble

  • Newbie
  • *
  • Posts: 26
    • View Profile
    • http://
SubApplet 1.0.8
« Reply #11 on: May 05, 2004, 05:56:03 pm »
Quote
On C860 stock Sharp ROM c/ English language mods by Dynamism.
Well do have plans to get myself one of those one of these days.... unless someone wishes to lend me one :-)

The 1.0.8 version has changes to the GUI layout which might make a difference - will try to use as much space as it can get its hands on.  Give it a try if there is still a problem send me a screen shot and I can see if I can work out what is wrong.  

There seems to be something odd when you rotate a 5XXX....can\'t seem to get it to behave, always a bit of the dialog hidden under the taskbar - which doesn\'t happen in normal portrait mode.
SL-5500, Own custom Crow-like ROM, DLink DCF-660W, Pocketop Keyboard, assorted no-name CF/SD cards.

SubApplet extender and maintainer, ditto for TaskList applet and Missile Command

Miami_Bob

  • Sr. Member
  • ****
  • Posts: 483
    • View Profile
SubApplet 1.0.8
« Reply #12 on: May 13, 2004, 10:01:09 pm »
Quote
The 1.0.8 version has changes to the GUI layout which might make a difference - will try to use as much space as it can get its hands on.  Give it a try if there is still a problem send me a screen shot and I can see if I can work out what is wrong.


No joy, tecknobabble. Can see the difference you mention but no change in problem. Wheres the best place to send you the screen shots? I have v1.0.7 & v1.0.8 in all 3 rotation modes.


RW
Bob W - Miami FL
--------------------
"The legs of the duck are short and
 cannot be lengthened without distress
 to the duck.

The legs of the crane are long and
 cannot be shortened without distress
 to the crane."

Chuang-tzu

--------------------
C860 main - Sharp 1.40 JP ROM
Language conversion by hand

alts: Cacko 1.22 / OZ 3.5.1 / pdaXrom
512Mb SanDisk SD (x2) / 512Mb SanDisk CF (x2)
Lexar 1Gb CF / AmbiCom WL1100C-CF 802.11b WiFi

Out of Hp200LX, from HP100LX, via HP95LX
--------------------
Desktop MegaTower c/ twin DataPort HD racks;
12 removable HDs with multi OSs - no waiting.

--------------------

Miami_Bob

  • Sr. Member
  • ****
  • Posts: 483
    • View Profile
SubApplet 1.0.8
« Reply #13 on: May 13, 2004, 10:09:26 pm »
Quote
... Reboot the zaurus.... Bob, will then be your sister\'s brother.... Hopefully    ....


Hummmm. Not that I\'m an expert, but shouldn\'t that be:

 \"Bob, will then be your mother\'s brother\"? (aka \"Bob\'s yur uncle\") <G>.



Bob W
(not an uncle!)
Bob W - Miami FL
--------------------
"The legs of the duck are short and
 cannot be lengthened without distress
 to the duck.

The legs of the crane are long and
 cannot be shortened without distress
 to the crane."

Chuang-tzu

--------------------
C860 main - Sharp 1.40 JP ROM
Language conversion by hand

alts: Cacko 1.22 / OZ 3.5.1 / pdaXrom
512Mb SanDisk SD (x2) / 512Mb SanDisk CF (x2)
Lexar 1Gb CF / AmbiCom WL1100C-CF 802.11b WiFi

Out of Hp200LX, from HP100LX, via HP95LX
--------------------
Desktop MegaTower c/ twin DataPort HD racks;
12 removable HDs with multi OSs - no waiting.

--------------------

tecknobabble

  • Newbie
  • *
  • Posts: 26
    • View Profile
    • http://
SubApplet 1.0.8
« Reply #14 on: May 14, 2004, 06:59:07 pm »
Quote
Quote
... Reboot the zaurus.... Bob, will then be your sister\'s brother.... Hopefully    ....


Hummmm. Not that I\'m an expert, but shouldn\'t that be:

 \"Bob, will then be your mother\'s brother\"? (aka \"Bob\'s yur uncle\") <G>.

Bob W
(not an uncle!)


Oops... very true, but since my middle name is Robert then Bob is my sister\'s brother  

Send the screenshots to tecknobabble at hotmail dot com
SL-5500, Own custom Crow-like ROM, DLink DCF-660W, Pocketop Keyboard, assorted no-name CF/SD cards.

SubApplet extender and maintainer, ditto for TaskList applet and Missile Command