NEW: CACkO Zaurus Qtopia ROM 1.21 HotFix B

[ev1l]

Just a stupid little error, but your icons are not found but the tab wizard, which makes it impossible to change the names of the default shortcut (it fails with an icon not found error).
Just a heads up

[panyasan]

Hi,

as many have pointed out before, great ROM & many thanks!  Once I get everything working I will look at your paypal page ;-).

One problem: I cannot get my DLINK DCF-660W WiFi card to work with the 1.21b ROM. I have tried

- with and without WEP
- autoconnect and manual setting

Kismet works beautifully. But trying to connect always results in "network was failed" (by the way, probably not good English?)

My questions:

- has anybody have this combination and
- should the network connection show up as wlan0 or eth0? At the moment, only eth0 is present when kismet runs.
- how should the card be configured manually if it doesn't work automatically?
- does WEP work at all? In this thread it is contended that WEP doesn't work at all with the 1.21b ROM

Thanks for any information.

panyasan

C700
Cacko 1.21 ROM
DLINK DCF-660W

[obscurite]

Weeeee... this is my first post from my new c860 using cacko 1.21b and a linksys wcf11.

Thanks for the awesome rom.

I noticed vpn settings in the network config app. Can anyone confirm that vpn works with this rom?

later... time to play with my z  

[mikew]

Where is the Paypal page, I always like to make a contribution when the software is as good as this.

Mike

[obscurite]

Just got a socket bluetooth CF Rev G card off of ebay. I was able to pair it with my T610 phone (from the phone), but don't know how to proceed from here. From within the Bluetooth section in the Networking App I tried creating different connections and connecting to them, but I don't know what to use as a username/password. I tried setting "phone" to the name of the phone (which is set on the phone itself). Nothing seems to work.

Can someone point me to a thread, or give me a crib sheet on how to get this card working on 1.21b? Thanks!!!!!!

-Daniel

[obscurite]

I'm planning on sticking with Cacko 1.21b until the next release is available for my C860. I unfortunately bought myself a Socket rev G card off of ebay thinking I was getting a deal. From what I've read on these forums I'm not sure it's worth my time and effort trying to get it to work (I don't have a lot of time to try to get my devices working sadly). Should I sell/donate the card, or has anyone out there got a setup that works?

Your words of support are appreciated  

-Daniel

[gizard]

I'm planning on sticking with Cacko 1.21b until the next release is available for my C860. I unfortunately bought myself a Socket rev G card off of ebay thinking I was getting a deal. From what I've read on these forums I'm not sure it's worth my time and effort trying to get it to work (I don't have a lot of time to try to get my devices working sadly). Should I sell/donate the card, or has anyone out there got a setup that works?

Your words of support are appreciated  

-Daniel

I have that same card and it works fine - Sorry can't remember where on here but it does tell you how to get it working - the only thing that is vital is the fact that you need to pull the card and re-insert after resuming from suspend mode. Sometimes I have to do a search for available Bluethooth devices to re- pickup the phone (I have used successfully with SE T39, SE T610, SE K700i and Motorola V3 all using GPRS on UK O2 network- and roaming abroad from this network.).

[maslovsky]

This card works fine. Next ROM will have much better support for it as well as for Billition cards.

[ev1l]

Would it possible to have a TCP/IP over USB network profile available?
I did everything manually, and ended up having both browsers complaining about the lack of usable interfaces (while all traffic was routed just fine through a desktop).
The PC-link/Network configs are in dire need of an overhaul to unify everything, including network scheme fast-switching, and quick activation.


It would be nice to be able to choose between a normal and a fast-FPU kernel. I don't think there's a compromise between the fast and imprecise and the slow but correct kernels, so being able to choose would be nice.

In the "Files" tab, it would be nice if the delete confirmation popup window used the Cancel and OK hardware buttons correctly (OK= confirm delete, Cancel= cancel delete command).

In the "Files" tab, make the filename truncated at the last period of the filename, not the first. Really irritating when files have several periods in their filename. Best would be to not truncate the filenames at all

[maslovsky]

Where is the Paypal page, I always like to make a contribution when the software is as good as this.

Mike

There is a link to payal at this page:

http://my-zaurus.narod.ru/cacko.html

[maslovsky]

Would it possible to have a TCP/IP over USB network profile available?
I did everything manually, and ended up having both browsers complaining about the lack of usable interfaces (while all traffic was routed just fine through a desktop).
The PC-link/Network configs are in dire need of an overhaul to unify everything, including network scheme fast-switching, and quick activation.

Try this: http://www.killefiz.de/zaurus/showdetail.php?app=1385

It would be nice to be able to choose between a normal and a fast-FPU kernel. I don't think there's a compromise between the fast and imprecise and the slow but correct kernels, so being able to choose would be nice.

How do you like square root out of 8 to be equal 2 with the fastFPU kernel?

In the "Files" tab, it would be nice if the delete confirmation popup window used the Cancel and OK hardware buttons correctly (OK= confirm delete, Cancel= cancel delete command).

In the "Files" tab, make the filename truncated at the last period of the filename, not the first. Really irritating when files have several periods in their filename. Best would be to not truncate the filenames at all

Sorry, this is not going to happen untill we have sources for the Sharp's Qtopia (read - never).

[ev1l]

Try this: http://www.killefiz.de/zaurus/showdetail.php?app=1385

That's nice, I'll try it. Any plan to integrate something like that in the ROM?

How do you like square root out of 8 to be equal 2 with the fastFPU kernel?

Hahaha, is the FastFPU kernel that bad? Agh

Sorry, this is not going to happen untill we have sources for the Sharp's Qtopia (read - never).

Too bad
Any idea about the missing icons stuff?

[maslovsky]

Any idea about the missing icons stuff?

Sorry, which ones?

That's nice, I'll try it. Any plan to integrate something like that in the ROM?

Try this:

https://www.oesf.org/forums/inde...indpost&p=51308

[DaveAnderson]

What is the status of Cacko 1.22?  Any eta?  Thanks.

[maslovsky]

What is the status of Cacko 1.22?  Any eta?  Thanks.

I'd say it's 80-90% ready. No ETA, but soon, I think.