KDE-Pim/Pi 1.9.10 Release

[zautrix]

I've got a rather full Sharp 3.13 ROM SL5500...
With v1.9.8 I was able to install all the apps and the kmicrokdelibs to my SD card, however, with v1.9.10 although all the apps will still install to the SD card, the kmicrokdelibs insist on being installed to main memory.

Is this intentional, or is it possible to allow the libs to be installed to the SD card again in a future version?

I know you said when you first allowed them to be installed to a SD card you recommended installing them all to the same place.

Thanks for reporting,

that is some kind of bug,
it should be possible to install the kmicrokdelibs on SD.

I will try to fix it.

z.

[kfetisov]

Hi!

For me is important 2 big issues in KaPi:
1.  If i use table view of my contacts without datails and then press "Ok" to view details of contact - and then press "Cancel" - it exit from Ka/Pi and not from Detail view as in standart PIM.  I need to use stylus  - it's no comfortable.

2. Sync with Sharp DTM - issue is Mobile Phone field. It don't sync with Home Mobile or Work Mobile in Sharp DTM.  Where i can setup field mapping like in Intellisync?

Best regards,

Konstantin

P.S. Will be very good if your PIM applications will work with cyrillic encoding. Now if i use categories in russian encoding Ka/Pi, Ko/Pi and PW/Pi drop down.

[swing]

that is some kind of bug,
it should be possible to install the kmicrokdelibs on SD.

Thanks for confirming this.

[maslovsky]

I also tried these packages. General impression is good, but there are some issues that I see:

KA/PI:

 - quite inconvinient to use keyboard when List and Details are not displayed together, I think that clicking Enter (or Spacebar) should toggle List/Details view
 - while in Details view Up and Down arrows should move to the previous/next contact
 - categories were not imported from Sharp DTM
 - would be nice to have an option to turn on full menu bar (like in KO/PI)
 - need to handle nextView() qcop message so that pressing Address button (when KA/PI is assigned to that button) would togglw List/Details view
 - have an option to view item on single click (not double click)

KO/PI:

 - why Month View is sooo slooow?
 - would be nice to be able to change keyboard mapping...
 - need to handle nextView() qcop message so that pressing Calendar (when KO/PI is assigned to that button) button would switch between different calendars views
 - have an option to view item on single click (not double click)
 - when FastLoad is turned on and Qtopia is restarted KO/PI appears before date dialog, though it should remain hidden untill explicitely invoked...

TaskBar Applet:

 - turning applet ON/Off crashes Qtopia
 - addresses menu item doesn't do anything...

[swing]

Also, I've turned off fastload on the original Calendar / Address Book / ToDo apps, yet I felt that the sync was stopping when it (Intellisync) tried to sync my contacts via DTM - I know the release notes state that the auto beam receive was stopping DTM syncing with KO/Pi - but can you confirm that DTM syncing with KA/Pi is working fine?

[maslovsky]

Also, I've turned off fastload on the original Calendar / Address Book / ToDo apps, yet I felt that the sync was stopping when it (Intellisync) tried to sync my contacts via DTM - I know the release notes state that the auto beam receive was stopping DTM syncing with KO/Pi - but can you confirm that DTM syncing with KA/Pi is working fine?

Intellisync worked for me when I turned off fast load for all Kx/PI apps and quit them.

[swing]

Intellisync worked for me when I turned off fast load for all Kx/PI apps and quit them.

Okay - must be a PC problem then.

[maslovsky]

Intellisync worked for me when I turned off fast load for all Kx/PI apps and quit them.

Okay - must be a PC problem then.

Did you try the "Clear Sync Info" button in PC Link app on Zaurus? This helps sometimes...

In rare cases I had to reboot Windows to fix sync problems...

[acpkendo]

Hi zautrix,

I just installed KO/Pi on a fresh flash of OZ 3.5.1.  First off, thank you for making these available for OZ- any support the community can give this project is a "good thing" I think.

After I installed, I noticed that no tab/icons were created, and that I couldn't start kopi from the command line.  After investigating, I found that the binary was installed to /mnt/ram/opt/Qtopia/bin. . . shouldn't this be /mnt/ram/opt/QtPalmtop/bin?

Otherwise, ipkg-link made all the proper symlinks, but starting /opt/Qtopia/bin/kopi gave an error about libmicrokdepim.so.1. . . presumably because this is located in /mnt/ram/opt/Qtopia/lib instead of /mnt/ram/opt/QtPalmtop/lib.

[ulf1]

After investigating, I found that the binary was installed to /mnt/ram/opt/Qtopia/bin. . . shouldn't this be /mnt/ram/opt/QtPalmtop/bin?

Otherwise, ipkg-link made all the proper symlinks, but starting /opt/Qtopia/bin/kopi gave an error about libmicrokdepim.so.1. . . presumably because this is located in /mnt/ram/opt/Qtopia/lib instead of /mnt/ram/opt/QtPalmtop/lib.

As reported on a german Z forum:
>>>
Wer Probleme mit der Installation unter OZ-3.5.1 hat (KDEPim Vers.: OZ_3.x.x) sollte vor der Installation einen sym-Link von /opt/Qtopia nach /opt/QtPalmtop legen! Danach sollte es gehen. Und wichtig alte libs alle deinstallieren (meine alte Version 1.9.4 war wohl noch anders zusammengepackt gewesen)
<<<

Translated :
"To avoid problems using KDEPim with OZ3.5.1 you have to create a symlink from /opt/Qtopia to /opt/QtPalmtop"


Ulf

[Cresho]

man this app is great!  thanks zautrix.  I been following this since you introduced it to us.  now i feel i can use it comfortably.

everything works on my sd and i have

openssl_0.9.7d_arm.ipk
kmicrokdelibs_1.9.10_arm.ipk
korganizer-alarm_1.9.10_arm.ipk

installed in main to prevent my zaurus from rebooting after i eject sd.

it is perfect and hope you get more fun out of this programming than i do as a user.

you must of been high on something cuz this is the best thing since...man i just wanted to let you know dude.  Free too....unbulevable!

[ulf1]

- quite inconvinient to use keyboard when List and Details are not displayed together, I think that clicking Enter (or Spacebar) should toggle List/Details view

Lets see with what we come up

- while in Details view Up and Down arrows should move to the previous/next contact

Fixed in 1.9.11 as long as the cursor is in the searchfield (which is usually the case). Thanks zautrix.

- need to handle nextView() qcop message so that pressing Address button (when KA/PI is assigned to that button) would togglw List/Details view

Implemented in 1.9.11 but not tested yet. Please test if available

- have an option to view item on single click (not double click)

Fixed in 1.9.11. You have to select "Honor KDE single click" in the preferences dialog.

[maslovsky]

OK, where can I get version 1.9.11?

[mikew]

Loaded 1.9.10 & synced to Sharp DTM & it removed all the diary entries, presumably it thinks all the entries were deleted in Sharp DTM, but they are all still there!!  I know I should not have said OK when it said that it wanted to delete 307 entries, but my hand was running ahead of my brain!

Is it looking in the wrong place for the Sharp DTM diary file?

Anyone know how to correct this, tried syncing again but it still can't find the Sharp DTM entries.

Mike

[zautrix]

OK, where can I get version 1.9.11?

Version 1.9.11 will be available soon.
( In 1-2 days)

Thank you very much for your comments,
I have implemented/fixed some points.
This makes KA/Pi better useable.

On nextView() KO/Pi is displaying always the What's next view.
That is not a bug, that is a feature.

z.