Author Topic: Which Wifi Cards Do You Use?  (Read 6678 times)

maslovsky

  • Hero Member
  • *****
  • Posts: 1426
    • View Profile
    • http://my-zaurus.narod.ru
Which Wifi Cards Do You Use?
« on: December 02, 2004, 10:56:13 am »
Hello everyone!

Cacko ROM 1.22 is appraching its release (yes, it wil be out very soon!).  Since we've completely replaced wlan-ng wireless drivers with hostap in the new ROM, I want to make sure that all cards, currently used by ZUG people are properly supported by the new drivers. Hostap drivers should support most prism2-based cards, but configuration entries for some cards may be missing. So, please, post here output of "cardctl ident" command. I will take a look into hostap config files and make sure there is an entry exists for it.

When posting, try not to duplicate information - have a look if other people have alreadyposted info on same card.

Thanks,
Anton

aszalea

  • Newbie
  • *
  • Posts: 2
    • View Profile
Which Wifi Cards Do You Use?
« Reply #1 on: December 02, 2004, 11:22:34 am »
Hi,

I use Buffalo WLI2-CF-S11
It works well with the cacko 1.21b.

Thanks for your very good work!

Optogeek

  • Newbie
  • *
  • Posts: 48
    • View Profile
    • http://optogeek.homelinux.net
Which Wifi Cards Do You Use?
« Reply #2 on: December 02, 2004, 11:33:31 am »
I have two.  A blue Origol/Senao WiFi Card, from Shirtpocket and a pink Mercury (?) card.  Both are the same except for the colour sticker.  In 1.21b they need the following in wlan-ng.conf.

Code: [Select]
card "Origol/Senao WLAN Card"
  manfid 0x000b, 0x7100
  bind "prism2_cs"
SL-C860 running Cacko 1.23
SL-5500UK with 3.13 Sharp ROM + Cacko Kernel
Origo WLAN and BlueMonkey BT CFs
1GB Crucial SD
1GB Crucial CF

timZ

  • Newbie
  • *
  • Posts: 6
    • View Profile
Which Wifi Cards Do You Use?
« Reply #3 on: December 02, 2004, 11:35:03 am »
Hi,

I want to use a D-Link DCF-660W with your new Cacko ROM 1.22. I hope you will support it, otherwise I have to buy another one.
And I also thank you for this great work   .

Thanks
Tim

bluedevils

  • Hero Member
  • *****
  • Posts: 1284
    • View Profile
    • http://
Which Wifi Cards Do You Use?
« Reply #4 on: December 02, 2004, 11:44:07 am »
I have the old spectrum/socket.  I'm pretty sure you would have this one covered.  I'm assuming the new cards from them are still not supported.
« Last Edit: December 02, 2004, 01:04:50 pm by bluedevils »
I'm now an iphone user and use my zaurii as serial terminals, perl and shell scripting and when I need 640x480 screens

sl-c3100/pda cacko 1.23 | sl-6000l/needs battery | sl-c760/server pdaxrom rc12 | Former sl-5500/tkcrom owner (sister's birthday gift)

stupkid

  • Hero Member
  • *****
  • Posts: 578
    • View Profile
    • http://
Which Wifi Cards Do You Use?
« Reply #5 on: December 02, 2004, 12:58:05 pm »
Those of you that do not know if you use a prism2 based card.  Please open a console and run the following command:

cardctl ident

Then post the output in this thread.  Otherwise we won't know what drivers need to be in the ROM.

Thanks!

Zaurus SL-C3200 pdaXii13v2 5.5 / Ambicom WC1100C-CF / Socket Bluetooth Rev G


OpenMoko FreeRunner - Running Tweaked OM2008.x Image

emerika

  • Newbie
  • *
  • Posts: 13
    • View Profile
    • http://
Which Wifi Cards Do You Use?
« Reply #6 on: December 02, 2004, 01:30:32 pm »
I use the Socketcom.com Low Power WLAN Card

product info: "Socket", "CF+ LP WLAN Card Rev A", "1.00"
manfid: 0x0104, 0x0001
function: 6 (network)

emerika

Peter Loron

  • Newbie
  • *
  • Posts: 3
    • View Profile
Which Wifi Cards Do You Use?
« Reply #7 on: December 02, 2004, 02:54:34 pm »
I use the Linksys WCF-12 with the Sharp 3.10 ROM.

product info: "Linksys", "Wireless CompactFlash Card", "", ""
manfid: 0x028a, 0x0673
function: 6 (network)

-Pete
---------------------------
SL-5500, Sharp 3.10 ROM

ltrm

  • Jr. Member
  • **
  • Posts: 86
    • View Profile
    • http://
Which Wifi Cards Do You Use?
« Reply #8 on: December 02, 2004, 05:13:04 pm »
product info: "Symbol", "Spectrum24 LA4100 Series WLAN PC CARD", "1.00"
manfid: 0x026c, 0x0001
function: 6 (network)
C860 - pdaXrom + XFCE4 <montyBurns>mmm Excellent</montyBurns>
Socket Bluetooth rev E - Socket low-power WiFi
1Gb Microdrive - Integral 1Gb SD
Belkin IR Keyboard - Pretec (Royaltek RBT-3000) BluetoothGPS
CE-RH1 remote control - Solar charger + some other bits 'n' bobs

Cyril92

  • Full Member
  • ***
  • Posts: 122
    • View Profile
Which Wifi Cards Do You Use?
« Reply #9 on: December 02, 2004, 05:40:18 pm »
Hello ,

I use a CF Asus Spacelink WL-110

bash-2.05$ cardctl ident
Socket 0:
  product info: "ASUS", "802_11B_CF_CARD_25", "Version 01.00", ""
  manfid: 0x02aa, 0x0002
  function: 6 (network)
« Last Edit: December 02, 2004, 05:44:18 pm by Cyril92 »
SL-C760 (Cacko ROM), 256Mb CF,512Mb SD
Pentopia stylus 3in1,CF wifi , CE-RH1
looking for : SL5500
Previous : C3000,C860 & 6000L.

dougeeebear

  • Hero Member
  • *****
  • Posts: 537
    • View Profile
    • http://
Which Wifi Cards Do You Use?
« Reply #10 on: December 02, 2004, 05:58:39 pm »
I use SMC EZ Connect SMC2642W 802.11b card.
SL-5500 with Sharp 3.13 Rom.

cardctl ident
Socket 0:
product info: " ", "SMC2642W 11mMbps Wireless CF  Card", ""
manfid: 0xd601, 0x0005
function: 6 (network)

Doug
Zaurus SL-C1000 and SL-5500
NetWalker PC-T1 (tablet)

kopsis

  • Sr. Member
  • ****
  • Posts: 329
    • View Profile
    • http://kopsisengineering.com
Which Wifi Cards Do You Use?
« Reply #11 on: December 02, 2004, 10:13:59 pm »
Code: [Select]
 product info: "AmbiCom", "WL1100C 802.11b CF-Card", "2.2"
  manfid: 0xd601, 0x0002
  function: 6 (network)                                                    

sacre

  • Newbie
  • *
  • Posts: 2
    • View Profile
Which Wifi Cards Do You Use?
« Reply #12 on: December 02, 2004, 11:01:32 pm »
Prolink WL201

Code: [Select]
product info: "INTERSIL", "HFA384x/IEEEE", "Version 01.02", ""
manfid: 0x0156, 0x0002
function: 6 (network)
« Last Edit: December 02, 2004, 11:04:19 pm by sacre »

el_borak

  • Jr. Member
  • **
  • Posts: 54
    • View Profile
    • http://
Which Wifi Cards Do You Use?
« Reply #13 on: December 03, 2004, 07:04:35 pm »
Sony PEGA-WL100

product info: "Intel", "PRO/Wireless LAN PC Card", "1.00"
manfid: 0x0089, 0x0001
function: 6 (network)

Snooby

  • Jr. Member
  • **
  • Posts: 68
    • View Profile
    • http://
Which Wifi Cards Do You Use?
« Reply #14 on: December 03, 2004, 09:13:44 pm »
Slightly different from Sacre's info:

Wisgo NL-2511CF(ETSI)

  product info: "INTERSIL", "HFA384x/IEEE", "Version 01.02", ""
  manfid: 0x0156, 0x0002
  function: 6 (network)
SL-5500 with tkc 2.0 Alpha 3.0 (/home on SD)
Kingston 256MB SD Card
Fujifilm 128MB CF Card
Wisgo 802.11b CF Wireless LAN Card
XP Pro, Redhat 7.3