I am running oz+opie 3.5.2 on my 5600 (PXAA250). I just bought a 128mb SD card (branded by 'SMART Modular Technologies'))), but whenever I insert it, my whole zaurus just locks up... I can't do anything with it. Here is the output from dmesg, from insertion, to removal:
pxa_sd_wait_response: responce time out (cmd=55 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=41 MMC_STAT=0x2142)
pxa_sd_wait_id_response: responce time out (cmd=01 MMC_STAT=0x2142)
wifi0: SW TICK stuck? bits=0x0 EvStat=8001 IntEn=e09f
wifi0: trying to recover from IRQ hang
pxa_sd_wait_response: card removed (cmd=01)
pxa_sd_wait_id_response: card removed (cmd=01)
pxa_sd_wait_id_response: card removed (cmd=01)
VFS: Disk change detected on device mmcd(60,1)
pxa_sd_wait_response: card removed (cmd=01)
pxa_sd_wait_id_response: card removed (cmd=01)
pxa_sd_wait_id_response: card removed (cmd=01)
VFS: Disk change detected on device mmcd(60,1)
Then, those last 4 lines repeat 10 or so times. Immediately after I remove the card, it un-freezes, and works fine. *Any* ideas are appreciated; I really want to get this SD card to work.