Author Topic: Air Cable Cell-connect (Read 6612 times)

Streamline · « **on:** December 28, 2004, 05:03:21 pm »

We have 10 of these left in stock and doubt if we can get anymore its my understanding they quit making them. If you are interested you can purchase them at

http://www.streamlinecpus.com or e-mail me stephen@streamlinecpus.com.

ran · « **Reply #1 on:** January 12, 2005, 02:07:18 pm »

Does this module support the advanced features documented on this page? The docs mention an "AIRCable Zaurus2", but it's not clear whether that's what you have on hand.

If so, it would be vastly more interesting than a mere "dumb cable replacement".

Ran

Streamline · « **Reply #2 on:** January 12, 2005, 04:55:03 pm »

Actually Ran after reading further this is what we have its the cell -connect http://www.aircable.net/AIRcable/ZaurusCell.html

maslovsky · « **Reply #3 on:** January 13, 2005, 03:04:30 pm »

I wanted to thank Stephen (aka Streamline) for kindly donating of one of these AirCable devices to Cacko ROM project!

It's nice to have people supporting Zaurus community!

ran · « **Reply #4 on:** January 14, 2005, 09:08:12 pm »

Have you been able to confirm/disprove that the "CellConnect" model supports the "Command Line Interface"?

Ran

Streamline · « **Reply #5 on:** January 14, 2005, 10:56:09 pm »

Yes they do Ran.

NoPane · « **Reply #6 on:** February 08, 2005, 06:56:17 am »

Using a C860, can you tell me how to talk to one of these adaptors? I've tried using minicom at 115200 8N1 to /dev/ttyS0 but I can't get a response from it (but the LED is flashing). Any help appreciated!

sloan_mclaughlin · « **Reply #7 on:** February 15, 2005, 02:19:05 pm »

Just writing to say I ordered the last one, and that Stephen provides great customer service. Thanks Stephen!

Streamline · « **Reply #8 on:** February 15, 2005, 06:46:11 pm »

We are working on getting more of these soon expect them in about 2 weeks. Also thanks for the kind words.

xjqian · « **Reply #9 on:** February 17, 2005, 12:31:27 am »

does this work with 6k?

maslovsky · « **Reply #10 on:** February 17, 2005, 01:30:08 am »

Quote

does this work with 6k?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=67416\"][{POST_SNAPBACK}][/a][/div]

As far as I know it should wotk with any Zaurus with Sharp connector (all models, except for C3000)

Streamline · « **Reply #11 on:** February 25, 2005, 07:28:09 am »

We now have 10 more of these in stock.

speculatrix · « **Reply #12 on:** February 25, 2005, 09:32:58 am »

Quote

Quote
does this work with 6k?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=67416\"][{POST_SNAPBACK}][/a][/div]

As far as I know it should wotk with any Zaurus with Sharp connector (all models, except for C3000)
[div align=\"right\"][a href=\"index.php?act=findpost&pid=67425\"][{POST_SNAPBACK}][/a][/div]

what's so special/wrong with the C3000? It is just its USB connector?

TRIsoft · « **Reply #13 on:** February 25, 2005, 10:14:54 am »

Quote

what's so special/wrong with the C3000? It is just its USB connector?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=68574\"][{POST_SNAPBACK}][/a][/div]

Speculatrix,

there's nothing "wrong" with the SL-C3000. You just need to keep
in mind that in all previous models we had the proprietery so known
"SHARP I/O port".

This port provided serial / usb / charging and JTAG functions depending
on the cable you use.

With the SL-C3000 this changed completely. The physical connector is
still there, but only for JTAG purpose. No USB / serial etc. any more.
SHARP did this, because now we have the new and shiny Mini-USB
connector with client / host capability. So why should they care about
our old cables ?

But this also implies that every device that used the SHARP I/O port
will not work with the SL-C3000. The AirCable is for the SHARP I/O
port, so it won't work with the 3000 model.

///TRIsoft

Marc Stephan

News:

Author Topic: Air Cable Cell-connect (Read 6612 times)