← previous next →
Pages: [1]

Author Topic: Howto: Ambicom Bt2000c Working On Z  (Read 5098 times)

tetron

  • Newbie
  • *
  • Posts: 2
    • View Profile
Howto: Ambicom Bt2000c Working On Z
« on: January 06, 2005, 11:39:37 pm »
It looks like a number of people have run into trouble with this card, but I think I've got it figured out.

Actually I should preface this with a disclaimer that I haven't tested it with another bluetooth device yet (my bluetooth phone arrives tomorrow!) but it does show up in hciconfig as "UP" and "RUNNING" and has a hardware address, so it at least *thinks* it's working... :-)

Here's the steps I took to make it work.  I have a C760 with the original 1.20-JP ROM.

1. Download and install these packages on your Zaurus:2. Download this kernel module:
http://interreality.org/~tetron/technology/zaurus/hci_uart.o
(It turns out that the hci_uart kernel module included in the bluez-kernel package wasn't compiled with support for the H4 protocol, which is necessary to make this card work!)

3.  Copy the kernel module from step 2 into the modules directory:
Quote
bash$ su
# cp hci_uart.o /lib/modules/2.4.18-rmk7-pxa3-embedix/kernel/drivers/bluetooth
# depmod -a
#

4.  Insert the kernel module
Quote
# modprobe hci_uart
#

5. (re-)start the bluetooth services:
Quote
# /etc/rc.d/init.d/bluetooth stop
# /etc/rc.d/init.d/bluetooth start
#

5. Use hciattach:
Quote
# hciattach ttyS3 bt2000c flow
CSR build ID 0x02-0x0D
Speed 0 unrecognised. Remaining at 57600 baud
#

6. Now bring up the device:
Quote
# hciconfig hci0 up
# hciconfig hci0
hci0:   Type: UART
        BD Address: 00:10:7A:5C:10:D8 ACL MTU: 192:8  SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:105 acl:0 sco:0 events:12 errors:0
        TX bytes:308 acl:0 sco:0 commands:12 errors:0
#

That's it!
« Last Edit: January 06, 2005, 11:40:44 pm by tetron »
Logged

tumnus

  • Hero Member
  • *****
  • Posts: 1176
    • View Profile
    • http://www.cpinkney.org.uk
Howto: Ambicom Bt2000c Working On Z
« Reply #1 on: January 07, 2005, 03:20:01 am »
  ok, that patch must have been missed by Marcel Holtmann then, because every time I've asked him about this, he didn't know. It certainly wasn't in the 2.3 utilities.

I'm hopefully going to be putting an ipk together this weekend with the latest software (v2.13) and utilities to update the one pointed to in the ZUG Bluetooth Howto.  This will also match the ipk I did for the SL-3000, which incidentally should work fine with an entry in /etc/bluetooth/uart .
Logged
# Search the Zaurus Howtos ## Search the Zaurus FAQs ## Find Z software at ELSI #
--------------------
UK SL5500 with Sharp ROM 3.13, SL5600 with Sharp ROM 1.32 - SuSE 9.0 Pro, Windows XP Home
Qualendar for Calendar and Todo
Socket Bluetooth CF Card (Rev F), Kingmax 512MB MMC Card, Palm Tungsten T Stylus,
Pretec CF->Smartmedia Adapter, Semsons Universal Battery Extender

mgaughan

  • Newbie
  • *
  • Posts: 1
    • View Profile
Howto: Ambicom Bt2000c Working On Z
« Reply #2 on: February 23, 2005, 10:29:57 am »
Quote
It looks like a number of people have run into trouble with this card, but I think I've got it figured out.

Actually I should preface this with a disclaimer that I haven't tested it with another bluetooth device yet (my bluetooth phone arrives tomorrow!) but it does show up in hciconfig as "UP" and "RUNNING" and has a hardware address, so it at least *thinks* it's working... :-)

Here's the steps I took to make it work.  I have a C760 with the original 1.20-JP ROM.

1. Download and install these packages on your Zaurus:2. Download this kernel module:
http://interreality.org/~tetron/technology/zaurus/hci_uart.o
(It turns out that the hci_uart kernel module included in the bluez-kernel package wasn't compiled with support for the H4 protocol, which is necessary to make this card work!)

3.  Copy the kernel module from step 2 into the modules directory:
Quote
bash$ su
# cp hci_uart.o /lib/modules/2.4.18-rmk7-pxa3-embedix/kernel/drivers/bluetooth
# depmod -a
#

4.  Insert the kernel module
Quote
# modprobe hci_uart
#

5. (re-)start the bluetooth services:
Quote
# /etc/rc.d/init.d/bluetooth stop
# /etc/rc.d/init.d/bluetooth start
#

5. Use hciattach:
Quote
# hciattach ttyS3 bt2000c flow
CSR build ID 0x02-0x0D
Speed 0 unrecognised. Remaining at 57600 baud
#

6. Now bring up the device:
Quote
# hciconfig hci0 up
# hciconfig hci0
hci0:   Type: UART
        BD Address: 00:10:7A:5C:10:D8 ACL MTU: 192:8  SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:105 acl:0 sco:0 events:12 errors:0
        TX bytes:308 acl:0 sco:0 commands:12 errors:0
#

That's it!
[div align=\"right\"][a href=\"index.php?act=findpost&pid=61037\"][{POST_SNAPBACK}][/a][/div]


Good Morning,

  I followed the instructions as detailed above.

At step 5, /etc/rc.d/init.d/bluetooth start   I get the following error -

  Starting Bluetooth subsystem: hcid sdpCan't open RFCOMM control socket: no such file or directory rfcomm.

Any thoughts?

thanks in advance,

mikeg
Logged

tumnus

  • Hero Member
  • *****
  • Posts: 1176
    • View Profile
    • http://www.cpinkney.org.uk
Howto: Ambicom Bt2000c Working On Z
« Reply #3 on: February 23, 2005, 02:13:59 pm »
That error usually means something is trying to open an rfcomm device but 'rfcomm bind all' has not been run or there is nothing defined in /etc/bluetooth/rfcomm.conf. I don't know why the bluetooth script would be trying to open a rfcomm device.

In any case I don't think this is working after all. From what I can gather, although hciconfig reports the card as UP, no further communication with the card can be made. It still needs a specific driver to be written for it.
Logged
# Search the Zaurus Howtos ## Search the Zaurus FAQs ## Find Z software at ELSI #
--------------------
UK SL5500 with Sharp ROM 3.13, SL5600 with Sharp ROM 1.32 - SuSE 9.0 Pro, Windows XP Home
Qualendar for Calendar and Todo
Socket Bluetooth CF Card (Rev F), Kingmax 512MB MMC Card, Palm Tungsten T Stylus,
Pretec CF->Smartmedia Adapter, Semsons Universal Battery Extender

egg8178

  • Newbie
  • *
  • Posts: 16
    • View Profile
Howto: Ambicom Bt2000c Working On Z
« Reply #4 on: June 03, 2005, 02:40:14 am »
hi all, i'm new here, would like to know the progress of support on bt2000c from bluez, while https://www.oesf.org/index.php?title=Bluetooth_Card_Support clearly stated that it's working with bluez, yet I cannot make it to work with instruction from https://www.oesf.org/index.php?title=Bluetooth can some one explain the difference between those ipk? pre-emptive? from what i understand reading all those post in the forum, bt2000c indeed using the csr chipset, so I should install this too? -> bluez-csr-serial_0.1_arm.ipk -<
thanks for your time reading this, and yes, I'm new to linux, yet with all the "specific terms" used everywhere in the forum.. *sigh*  
Logged

tumnus

  • Hero Member
  • *****
  • Posts: 1176
    • View Profile
    • http://www.cpinkney.org.uk
Howto: Ambicom Bt2000c Working On Z
« Reply #5 on: June 03, 2005, 06:15:13 pm »
While the BT2000C uses the CSR chip for the Bluetooth comms, the communication between the Zaurus and the CF card itself is done using a serial protocol and the driver for the serial chip on the CF card does not exist at the moment as far as I know.
Logged
# Search the Zaurus Howtos ## Search the Zaurus FAQs ## Find Z software at ELSI #
--------------------
UK SL5500 with Sharp ROM 3.13, SL5600 with Sharp ROM 1.32 - SuSE 9.0 Pro, Windows XP Home
Qualendar for Calendar and Todo
Socket Bluetooth CF Card (Rev F), Kingmax 512MB MMC Card, Palm Tungsten T Stylus,
Pretec CF->Smartmedia Adapter, Semsons Universal Battery Extender

egg8178

  • Newbie
  • *
  • Posts: 16
    • View Profile
Howto: Ambicom Bt2000c Working On Z
« Reply #6 on: June 03, 2005, 07:48:30 pm »
Thanks for the info, but I already bought and opened the bt2000c.. too late to do a return.. well, but according to https://www.oesf.org/forums/index.php?showt...0575&hl=bt2000c cacko does support this card, guess I'll just have to wait for the cacko to be available for the SL-6000L then, and btw,  shouldn't https://www.oesf.org/index.php?title=Bluetooth_Card_Support be updated to reflect that bluez currently has no support for bt2000c? because I bought it after checking there, just don't wish any newbie would make the same mistake as I did..

Thanks tumnus, appreciate what you did for a newbie like me
Logged

tumnus

  • Hero Member
  • *****
  • Posts: 1176
    • View Profile
    • http://www.cpinkney.org.uk
Howto: Ambicom Bt2000c Working On Z
« Reply #7 on: June 05, 2005, 06:20:24 pm »
I hadn't noticed tetron had updated that page. Did you try the instructions that tetron gave above? I haven't got that card to test this with.

I didn't think it was working as people have used the later version of the BlueZ libraries that I compiled, which have the stuff tetron said was missing. So I was wondering if tetron has done something else...
Logged
# Search the Zaurus Howtos ## Search the Zaurus FAQs ## Find Z software at ELSI #
--------------------
UK SL5500 with Sharp ROM 3.13, SL5600 with Sharp ROM 1.32 - SuSE 9.0 Pro, Windows XP Home
Qualendar for Calendar and Todo
Socket Bluetooth CF Card (Rev F), Kingmax 512MB MMC Card, Palm Tungsten T Stylus,
Pretec CF->Smartmedia Adapter, Semsons Universal Battery Extender

egg8178

  • Newbie
  • *
  • Posts: 16
    • View Profile
Howto: Ambicom Bt2000c Working On Z
« Reply #8 on: June 06, 2005, 10:01:22 pm »
hi, tried the instruction given above, while using the bluez-zaurus_2.3-2.4.18d_arm.ipk from https://www.oesf.org/index.php?title=Bluetooth, everything seems fine until step 5,  I got the same error msg as mgaughan "At step 5, /etc/rc.d/init.d/bluetooth start I get the following error -
Starting Bluetooth subsystem: hcid sdpCan't open RFCOMM control socket: no such file or directory rfcomm."

if I use the ipk listed above, at first step, "depmod -a" returned
"depmod:*** Unresolved symbol in /lib/modules//2.4.18-rmk7-pxa3-embedix/kernel/net/bluetooth/bnep/bnep.o"

and ofcourse, the step 5 error as well..

did I miss something obvious?

Thanks for your time
Logged

tumnus

  • Hero Member
  • *****
  • Posts: 1176
    • View Profile
    • http://www.cpinkney.org.uk
Howto: Ambicom Bt2000c Working On Z
« Reply #9 on: June 11, 2005, 06:57:24 pm »
Nope, I think it simply isn't working. I'll remove the working comment on the wiki...
Logged
# Search the Zaurus Howtos ## Search the Zaurus FAQs ## Find Z software at ELSI #
--------------------
UK SL5500 with Sharp ROM 3.13, SL5600 with Sharp ROM 1.32 - SuSE 9.0 Pro, Windows XP Home
Qualendar for Calendar and Todo
Socket Bluetooth CF Card (Rev F), Kingmax 512MB MMC Card, Palm Tungsten T Stylus,
Pretec CF->Smartmedia Adapter, Semsons Universal Battery Extender
Pages: [1]
← previous next →