Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - IK6yae0s

Pages: [1] 2

I bought a corrupt cable which does not released the usb-c plug in the socket. At removing of the cable the usb-c port has to been damaged so I want to replace it. Does anybody knows which p/n I can use?



after first initialisation of id card was done on my workstation the id card could now be used also on the communicator with ausweisapp without any more problems. I'd read that the card needs more or longer power which maybe cannot delivered from the phone. Signing later looks like limits the power so it works now.

My Codi is defekt. The glass has a fine break line so I think the display is also destroyed.
Is there a replacement part for the display only? Would be nice to hear something like a p/n.


I don't want to reactivate the keyboard backlight each time after the phone has to been rebooted. Is there a way to fix this?
Is it possible to change the backlight in affect of the brightness of environment?



if I calling from my phone or with my car display remotly the ringing itself is hearing over my car speakers.
But if the call is answered the phone will switch back audio to the phone to hold in the hand which is very bad if im driving.
I can switch back to the car but mostly the caller has been often hang up so I must try it a second and third time.

With other (non Android) phones I did not have such a problem. Maybe it is only related to android.

Any idea how I can change this "feature?" If my phone is connected with my car everything audio should routed to the car without switching back to the phone.

This problem is not related to the car. I got this problem on Volvo XC40 Recharge, Nissan Leaf ZE1, Toyota Yaris 2021 Edition.


Cosmo Communicator - Android / Re: HDMI audio output
« on: July 06, 2021, 03:37:51 am »
I'm sure it has been worked last year. I will recheck and give my results.

Cosmo Communicator - Android / Re: Keyboard Bounces
« on: July 06, 2021, 03:36:44 am »
I have also problems with my communicator also with my gemini. On both some keys must be hit more times before a key is acepted, but some other keys will be create often double or more chars on screen if they be hitted.
It looks like the keyboard and the reading of the key algo is not the best. I hope it will be better on Astro Slide.

Maybe the double key press problems could be solved by made a less sensitive reading algo of the key :-/

Cosmo Communicator - Hardware / Re: Wanted: planet usb-c hub
« on: April 28, 2021, 02:43:29 am »
I you need a new one check also indiegogo. There is a new perk available as Astro connectivity Kit for 64€.
I't looks like the same which I got for my CC. But on store the hub is also available.

But I think your request is to buy a cheaper used item !?

Yesterday I tried to use my ID Card with my CC and the AusweisApp.
The ID Card NFC chip is found but If I tried to start the security functionality of the card the connection will loose.
I position the card over the camery module because I mean the NFC antenna of the CC should be there. But also moving the card around this area does not fix the issue.
The knowledge base of the AusweisApp means this could be a problem of limited power supply for the NFC because of power save functionality.
Is there a way to modify the power supply to send more power to the nfc secure chip in my ID Card?

Cosmo Communicator - Hardware / Re: Fast charging port
« on: April 28, 2021, 02:23:57 am »
It's on the left side and can charge also if the phone is off.
On right it will only charge if phones os is started.
I found I can use both ports at the same time if the phone is started and then it will charge with more current. By the way if the phone is in off state it could be a problem to try to charge at both ports because then it is possible as long right port is used the power supplies will be switching off like a short circuit situation.

I found this because I use on the left side port a 5W Qi-Pad to charge my CC to safe my USB-C port from damage and can still use the right port for the hdmi connector.

Cosmo Communicator - Android / Keyboard Bounces
« on: October 03, 2020, 06:23:02 am »

also as on my Planet Gemini my Cosmo Communicators keyboard often bounces.
Any Idea how I can fix this problem? Or is this a regular problem of the hw?

Hello again,

after 6-10 hours of charging by this left port it has been stopped.
Charging is not further possible any more.
USB-OTG by using Card reader or USB Storage device is also not further working.

I checked also a simple restart does not help (Pressing Fn + Esc then reboot).
Only a shutdown with a new startup looks like helps.

Any idea why the device stops working after couple of hours?


Hello again,

I rebooted the phone by shutting down and restart manually. After that the USB port looks like
working again. I wonder me because today the device has been shut down yesterday morning
because of battery empty because of charging on the right usb-c has not been worked.

Also USB Device Info is working and shows now the connected device.
But in debug mode the permission problem is still shown so I think this is a normal behavior
for the tool under android.

Also other devices like my usb-storage device is working again.

I will watching about this issue.

Cosmo Communicator - Android / USB OTG port problem since last upgrade?
« on: October 02, 2020, 07:31:35 pm »

I use a USB-C to USB-A Cable to connect different devices to my Cosmo Communicator.
So it has been worked for mass storage devices like my USB-A Flashdrive (64G) also
for a Keyboard or mostly my card reader devices.
Since short time I got now the problem that no of the devices which I connect will
work anymore on my CoCo. I use the left port to charge the device by a qi-card which
is glued to the back, and the right one for all the rest.
The last time the port has been worked with my card reader device was on 09.09.2020.

What I see is on the card reader Rainer CyberJack SCT, If I connect it to the Card Reader
the both led flickers short time but the reader than will not further initiate as like on
my desktop pc.
The Kingston USB-Storage will not identified.
A Cherry numeric keyboard will also not work.
Another Card Reader (SPR 532 Chipdrive) looks like is initiated but my application
Driver Card Reader Pro (reads drivers licence cards) does not find the device
as like before as like my Rainer CyberJack SCT.

Another Problem: the device cannot be charged any more on the right port.
I think, latest time to charge the phone was round about on the 19.09.2020.

In the past I user USB Device Info app to identify and get more info of connected
usb devices. At Debug mode I get an error that /sys/bus/usb/devices is not readable
because of missing permission. I wonder me, but maybe that was also the situation
in the past.

If I search for "USB" in settings search bar I found 3 usb device setups, but
everything is greyed out so I can change nothing.


Gemini PDA - German / Oft geht FN-R für Screenshots nicht mehr
« on: March 10, 2019, 07:32:21 am »
Ich hatte per Websuche auf der Plante Gemini Seite gefunden:
Das mit dem unterborchenem Rechteck hatte ich aber gar nicht beachtet sonst wäre mir vermutlich schon vorher aufgefallen das das Symbol vielleicht "Screenshot erstellen" bedeuten können. Danke für den Hinweis.
Das bedeutet also das andere Tastatureinstellungen auch andere Kombinationen bedeuten.
Damit ist ja nun alles erklärt und das Thema kann geschlossen werden. Danke für die Hilfe an alle.

Pages: [1] 2