Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - RX Shorty

Pages: [1] 2 3 ... 9
GPD Win - hardware / Travel Case
« on: November 27, 2016, 09:26:28 am »
I bought the GPD case from aliexpress.
It is also a GPD XD case, but the GPD Win fits perfect.

 [ Invalid Attachment ]

GPD Win - hardware / New Gpd Clamshell W/ Keyboard In The Works
« on: November 10, 2016, 06:34:57 pm »
Still waiting on a few daya off to play with linux on the GPD Win.

GPD Win - hardware / Overheating Problem? The Phawx Shows How To Solve
« on: November 10, 2016, 06:32:42 pm »

It seems only the early 8750 are affected by the plastic film.
Still my device sometimes gets pretty hot.

GPD Win - hardware / New Gpd Clamshell W/ Keyboard In The Works
« on: November 10, 2016, 06:09:06 pm »
Quote from: speculatrix
I see the dingoonity forum have created a specific section for the GPD Win
so I'm not sure whether our GPD Win forums will get much traction?

Well I found my way back here
Still running Windowa 10 on the GPD Win though.

Sharp PC-Z1 NetWalker / How To: Restore Your Netwalker Pc-z1
« on: September 06, 2012, 05:29:30 am »
It was a bit outdated, so I changed the zip file for a img file.

Sharp PC-Z1 NetWalker / No More Updates From Sharp For The Netwalker?
« on: September 05, 2012, 03:22:28 pm »
Yeah I know... to bad

Sharp PC-Z1 NetWalker / No More Updates From Sharp For The Netwalker?
« on: September 01, 2012, 05:45:36 pm »
I am still hoping for a real zaurii follow up...
Make it a C4000, a bit thinner and more cpu power and ram and ready to go!

For Sale / Wanted / Wanted Sl-6000
« on: July 29, 2012, 04:26:07 pm »
I have send you a PM.
Thanks for the offer.

Sharp PC-Z1 NetWalker / No More Updates From Sharp For The Netwalker?
« on: June 19, 2012, 10:10:49 am »
And the last update on Ubuntu 9.04 from Sharp is online....

It is a pitty they only did security fixes instead of distro upgrades.

 [ Invalid Attachment ]

Sharp PC-Z1 NetWalker / Android 4.0.3
« on: June 18, 2012, 04:17:48 pm »
First I must admit I didn`t test it yet...

Tested it and it works!
Sometimes a bit slow but overal no problems.
A minor sitback is that the keyboard layout isn't correct with Android, but you will figure it out while typing.
This is only for the special characaters.


Played for it for an hour... to slow for me...

How to put this on your netwalker:

First, please install gparted into your NetWalker, and make partitions in your SD card.
To install gparted, please try the command "sudo apt-get install gparted,"
and if it does not work, please find gparted_0.4.3-0ubuntu1_armel.deb from the Internet, and install it with "dpkg -i gparted_0.4.3-0ubuntu1_armel.deb".

Code: [Select]
sudo gparted /dev/mmcblk0
The following two partitions are required.

    1GB of ext3 (for kernel and android system), label = rootfs
    remaining of FAT32 (LBA) (for SD card area), label = media

Then mount the SD card by re-inserting the SD card.
Then, install the android as follows. You should have write permission in the working directory.

    Download, and extract it in ext3 area of your SD card.

Code: [Select]
    sudo tar xf os.tar.bz2 -C /media/rootfs

    Erase all the lines in /media/rootfs/etc/udev/rules.d/70-persistent-net.rules in order to fix the Wifi device as "eth0".

    For example, please use gedit.

Code: [Select]
    sudo gedit /media/rootfs/etc/udev/rules.d/70-persistent-net.rules
    Rename /media/rootfs/etc/rc2.d/S01upfirm as /media/rootfs/etc/rc2.d/~S01upfirm.

Code: [Select]
    sudo mv /media/rootfs/etc/rc2.d/S01upfirm  /media/rootfs/etc/rc2.d/~S01upfirm
    Edit the console option in /media/rootfs/boot/boot.conf as "console=tty1"
    For example, please use gedit.

Code: [Select]
    sudo gedit /media/rootfs/boot/boot.conf
    Copy the kernel zImage ($ANDROID_ROOT/jaunty-arm/arch/arm/boot/zImage)
    into the boot directory. You cannot use the kernel for gingerbread.

Code: [Select]
    sudo cp zImage /media/rootfs/boot/

    Put the android system in /media/root/android/ics

Code: [Select]
    sudo mkdir /media/rootfs/android
    sudo tar zxf ics4.0.3-20120102.tgz -C /media/rootfs/android

    Edit the /media/rootfs/etc/rc.local, and put a line /usr/sbin/chroot /android/ics /init
    before "exit 0".
    For example,
Code: [Select]
    sudo gedit /media/rootfs/etc/rc.local
    Then, unmount the CD card.

Code: [Select]
    sudo umount /media/*
    And shutdown Ubuntu. Please unmount the SD card everytime before you shutdown Ubuntu.
Code: [Select]
    sudo poweroff
    To launch android, please press two mouse buttons and power button simultaneously.
    If small black square appears at the left side of Sharp logo, the launch is successful.

Here a little status overview:

Wifi works, but sometimes it is disconnected.

First, enable Wifi. If your network does not appear, add your network manually. Then please toggle Wifi ON/OFF serveral times,

We confirmed that Buffalo BSHSBD02 works. However, we had to insert the device directly to NetWalker without bus-power USB hub.
You can use BluetoothChat in android SDK.

In kernel, Video4Linux is enabled, but CameraService does not work yet. We added TKCam2Webcams.apk which aquare images directly from kernel.

You can use the devices with FTDI driver and PL2302 driver.

Not working.


NetWalker sleeps by pressing the power button, but display is always ON.
You can choose "Never timeout" for sleep mode.
You cannot use the console of android nor linux.

Other problems
LiveWallpaper does not work
Battery always show 100%
The frequency of CPU is always set maximized because "on demond" mode seems not to work.

How to can be found HERE

Sharp PC-Z1 NetWalker / Jaunty Repository Gone?
« on: June 18, 2012, 03:30:36 pm »
Hey sdjf,

I know Arch that is a nice distro.
The Netwalker has a:Freescale i.MX515, 800Mhz

Is there also img available for the Netwalker?


For Sale / Wanted / Wanted Sl-6000
« on: May 31, 2012, 05:24:50 pm »
Well nobody has one?
A C-1000 is also welcome

Sharp ROMs / Sharp Rom 1.12 For Tosa
« on: May 20, 2012, 03:30:20 pm »
Only sources I found can be found HERE.

6000 - Tosa / Original Sharp Rom
« on: May 20, 2012, 12:30:24 pm »
Well got 2 Tosa's atm but non with build in Wifi... still searching for that.
1 Tosa has a dead screen the other does work pretty well...

The Tosa I have now runs on stock Sharp rom. But I want to have a backup.
I will try a google search thanks!

6000 - Tosa / Original Sharp Rom
« on: May 15, 2012, 07:31:52 am »
Hi all,

I am searching for the stockrom for the Tosa.
Anybody could give me a hint where I can the download for this?

Thanks in advance.



Pages: [1] 2 3 ... 9