Wellenreiter On Sharp Rom?

[Cresho]

Thanks Cresho,
What does the "name" section under interface say for you Cresho?  Mine is blank.  I don't understand how this program works but maybe it can't find my network scripts?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95760\"][{POST_SNAPBACK}][/a][/div]

it says wlan0 under name and wlanf-ng under driver

make sure you are using my ipk,s i posted.

try installing this from a fresh install of the zaurus.  i mean backup and restore os like if it came from the factory.

i did the installs and can assure you that nothing else is needed.  use the ipk i listed and not yours.

it is most likely it does not find your card.  try the ipk.s i stated.  if you cant find em, email me and ill send em to you

[Airwolf]

Thanks Cresho,
What does the "name" section under interface say for you Cresho?  Mine is blank.  I don't understand how this program works but maybe it can't find my network scripts?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95760\"][{POST_SNAPBACK}][/a][/div]

it says wlan0 under name and wlanf-ng under driver

make sure you are using my ipk,s i posted.

try installing this from a fresh install of the zaurus.  i mean backup and restore os like if it came from the factory.

i did the installs and can assure you that nothing else is needed.  use the ipk i listed and not yours.

it is most likely it does not find your card.  try the ipk.s i stated.  if you cant find em, email me and ill send em to you
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95766\"][{POST_SNAPBACK}][/a][/div]

hi Cresho

Followed your excellent tutorial on my 5500 but i am having problems running wellenreiter.

From terminal as non root it runs with the warning about running as non root. Wellenreiter starts but i cannot select the interface.

If i su to root and run from terminal i get an error "..loading shared libraries: libopie.so.1: cannotload shared object file: No such file

any ideas

thanks

[Airwolf]

Thanks Cresho,
What does the "name" section under interface say for you Cresho?  Mine is blank.  I don't understand how this program works but maybe it can't find my network scripts?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95760\"][{POST_SNAPBACK}][/a][/div]

it says wlan0 under name and wlanf-ng under driver

make sure you are using my ipk,s i posted.

try installing this from a fresh install of the zaurus.  i mean backup and restore os like if it came from the factory.

i did the installs and can assure you that nothing else is needed.  use the ipk i listed and not yours.

it is most likely it does not find your card.  try the ipk.s i stated.  if you cant find em, email me and ill send em to you
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95766\"][{POST_SNAPBACK}][/a][/div]

[Airwolf]

Thanks Cresho,
What does the "name" section under interface say for you Cresho?  Mine is blank.  I don't understand how this program works but maybe it can't find my network scripts?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95760\"][{POST_SNAPBACK}][/a][/div]

it says wlan0 under name and wlanf-ng under driver

make sure you are using my ipk,s i posted.

try installing this from a fresh install of the zaurus.  i mean backup and restore os like if it came from the factory.

i did the installs and can assure you that nothing else is needed.  use the ipk i listed and not yours.

it is most likely it does not find your card.  try the ipk.s i stated.  if you cant find em, email me and ill send em to you
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95766\"][{POST_SNAPBACK}][/a][/div]
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95775\"][{POST_SNAPBACK}][/a][/div]

posted incorrectly before - sorry

hi Cresho

Followed your excellent tutorial on my 5500 but i am having problems running wellenreiter.

From terminal as non root it runs with the warning about running as non root. Wellenreiter starts but i cannot select the interface.

If i su to root and run from terminal i get an error "..loading shared libraries: libopie.so.1: cannotload shared object file: No such file

any ideas

thanks

[xamindar]

Could you post these two?

libopie2_1.8.2-20031220_arm.ipk
opie-wellenreiter_1.0.2.1-20031220_arm.ipk


I looked for like an hour but couldn't find them....I found the first two though.

EDIT!!!!  Never mind, I already have them.  They are the ones I already had installed.  Gosh I better go to bed.  In any case it doesn't work

[Airwolf]

Could you post these two?

libopie2_1.8.2-20031220_arm.ipk
opie-wellenreiter_1.0.2.1-20031220_arm.ipk


I looked for like an hour but couldn't find them....I found the first two though.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95778\"][{POST_SNAPBACK}][/a][/div]

Xamindar

I have a zip file with all the files

[xamindar]

Could you post these two?

libopie2_1.8.2-20031220_arm.ipk
opie-wellenreiter_1.0.2.1-20031220_arm.ipk


I looked for like an hour but couldn't find them....I found the first two though.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95778\"][{POST_SNAPBACK}][/a][/div]

Xamindar

I have a zip file with all the files
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95779\"][{POST_SNAPBACK}][/a][/div]

thanks

[Airwolf]

Could you post these two?

libopie2_1.8.2-20031220_arm.ipk
opie-wellenreiter_1.0.2.1-20031220_arm.ipk


I looked for like an hour but couldn't find them....I found the first two though.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95778\"][{POST_SNAPBACK}][/a][/div]

Xamindar

I have a zip file with all the files
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95779\"][{POST_SNAPBACK}][/a][/div]

thanks
[div align=\"right\"][a href=\"index.php?act=findpost&pid=95780\"][{POST_SNAPBACK}][/a][/div]

No problem

let me know how you get on as i still have the same problems

[xamindar]

Well, I'm posting the output of wellenreiter and going to bed.  Maybe it will help someone help me.  I'll have another crack at it tomorrow.

Code: [Select]

bash-2.05# wellenreiter
OGlobal::creating global configuration instance.
OConfig::OConfig()
loading configuration settings...
OConfig::OConfig()
QObject::connect: No such slot QListView::expand(QListViewItem*)
QObject::connect:  (sender name:   'unnamed')
QObject::connect:  (receiver name: 'unnamed')
QObject::connect: No such slot QListView::expand(QListViewItem*)
QObject::connect:  (sender name:   'unnamed')
QObject::connect:  (receiver name: 'unnamed')
[01:24:22] (i) Wellenreiter has been started.
 
[01:24:22] (i) Running on 'Zaurus'.
 
GPS::GPS()
QPixmap::convertFromImage: Cannot convert a null image wellenreiter
QPixmap::convertFromImage: Cannot convert a null image wellenreiter
QPixmap::convertFromImage: Cannot convert a null image wellenreiter
QPixmap::convertFromImage: Cannot convert a null image wellenreiter
Wellenreiter::preloading manufacturer database...
show configure...
WellenreiterConfigWindow::performAutodetection()
Wellenreiter: guessed device type to be #2
WellenreiterConfigWindow::performAutodetection()
Wellenreiter: guessed device type to be #2
WellenreiterConfigWindow::performAutodetection()
Wellenreiter: guessed device type to be #2
WellenreiterConfigWindow::performAutodetection()
Wellenreiter: guessed device type to be #2
Wellenreiter:: bye.
GPS::~GPS()
saving configuration settings...
OConfig::~OConfig()
bash-2.05#          

[xamindar]

Well I give up.  Maybe some option is missing in the kernel?

[dlichterman]

im getting the error where the top one is blank and under root it won't run  too

I even tried a different libopie for the sharp rom

edit: and now cacko w sharp 3.13

[xamindar]

im getting the error where the top one is blank and under root it won't run  too

I even tried a different libopie for the sharp rom

edit: and now cacko w sharp 3.13
[div align=\"right\"][a href=\"index.php?act=findpost&pid=96630\"][{POST_SNAPBACK}][/a][/div]

Yeah, I never did get it working.  I gave up.