Author Topic: Sd Card Fails On Insert  (Read 29141 times)

colm

  • Newbie
  • *
  • Posts: 14
    • View Profile
Sd Card Fails On Insert
« on: July 19, 2005, 03:41:01 pm »
UPDATE: Just tried OZ+opie, same thing from Dmesg

Hi Folks,

Just got a noname 1GB SD Card, seen on lots of posts that brand is quite important for zaurus, but chanced on a cheap (£40) ebay auction.  Card is used - normal usage scoring on contacts.
When I insert the card, the SD card icon does not appear

dmesg reports:
SD read CRC error : ffff : d1d7
VFS : Disk change detected on device mmcd(60,1)
(9 times, presumably the retries)

#mkdosfs /dev/mmcda1
mkdosfs 2.8 (28 Feb 2001)
/dev/mmcda1: No such device or address

hardware: 2nd Hand Zaurus 5500 (£70 from ebay)

this is the first SD card I've tried, so I can't confirm that the slot works (only have CF and memory sticks in other devices...), but the "Disk change detected" reported in dmesg is promising that the hardware at least works.  Can't confirm that the card works elsewhere until tomorrow...

running Sharp 3.1 rom, just about to try latest OZ+opie

Think reformatting the card via iPaq or PC might work?

--
Colm
« Last Edit: July 19, 2005, 06:29:11 pm by colm »

macubergeek

  • Newbie
  • *
  • Posts: 14
    • View Profile
Sd Card Fails On Insert
« Reply #1 on: July 19, 2005, 04:40:31 pm »
Your post reminded me of something the salesman at the local Best Buys shop told me. He indicated that the maximum sd card pda's like the zaurus will take is 512megs. I was lusting after a 1 gig card myself...Can anyone substantiate this for us?

grog

  • Hero Member
  • *****
  • Posts: 692
    • View Profile
    • http://
Sd Card Fails On Insert
« Reply #2 on: July 19, 2005, 10:20:44 pm »
Quote
Your post reminded me of something the salesman at the local Best Buys shop told me. He indicated that the maximum sd card pda's like the zaurus will take is 512megs. I was lusting after a 1 gig card myself...Can anyone substantiate this for us?[div align=\"right\"][a href=\"index.php?act=findpost&pid=88843\"][{POST_SNAPBACK}][/a][/div]
Check my sig. FWIW 1g works fine for me, dual partitioned, 800mb vfat, 200mb ext2.
GROG!

Mag1c

  • Newbie
  • *
  • Posts: 30
    • View Profile
    • http://
Sd Card Fails On Insert
« Reply #3 on: July 20, 2005, 03:07:27 am »
Hi,

same here, 1 GB Lexar SD ext2-formated works fine for me.

Try to check the SD cards on PC. Looks like the SD-port on your
Zaurus is dead.

greets
Mag1c

chrget

  • Full Member
  • ***
  • Posts: 129
    • View Profile
Sd Card Fails On Insert
« Reply #4 on: July 20, 2005, 03:28:00 am »
Quote
Looks like the SD-port on your Zaurus is dead.[div align=\"right\"][a href=\"index.php?act=findpost&pid=88895\"][{POST_SNAPBACK}][/a][/div]
Gee, can I have a crystal ball just like yours?

It is widely documented across this and other resources across the 'net that the Z (possibly mainly Collie, wouldn't know about the others) is a picky little bugger when it comes to SD cards in general. This matches my personal experiences, and IMHO when buying an SD card one ideally should do a 'try before you buy' deal. Obviously having a local dealer can certainly help with that.

So it isn't a size issue  but rather a case of lousy compatibility (AFAIK on the Z side). I'm running my 1GB Extrememory just fine in my Collie (it was one of three I tried in my trusty dealer's shop, and the only one that worked -- go fig!) for quite a while now (would have to check, but should be almost a year by now).

So, even if the card runs fine in another device, it doesn't necessarily mean that the SD port of your Z is fried.

Best regards,
Chris.
SL-5500G running a modified 3.13 Sharp ROM
Extrememory 1GB SD / Netgear MA701 WLAN
Audiovox RTM-8000 GSM/GPRS CF Card

macubergeek

  • Newbie
  • *
  • Posts: 14
    • View Profile
Sd Card Fails On Insert
« Reply #5 on: July 20, 2005, 05:34:23 am »
One question I have:
Can you use the 1Gig card As-is formated vfat or do you have to reformat it ext2?

I'd rather keep it formated vfat if possible.

chrget

  • Full Member
  • ***
  • Posts: 129
    • View Profile
Sd Card Fails On Insert
« Reply #6 on: July 20, 2005, 05:40:32 am »
Quote
Can you use the 1Gig card As-is formated vfat [...][div align=\"right\"][a href=\"index.php?act=findpost&pid=88905\"][{POST_SNAPBACK}][/a][/div]
That's the way I'm running mine, for a variety of reasons.

Best regards,
Chris.
SL-5500G running a modified 3.13 Sharp ROM
Extrememory 1GB SD / Netgear MA701 WLAN
Audiovox RTM-8000 GSM/GPRS CF Card

Cresho

  • Hero Member
  • *****
  • Posts: 1609
    • View Profile
    • http://home.earthlink.net/~cresho/
Sd Card Fails On Insert
« Reply #7 on: July 20, 2005, 06:43:21 am »
i been using a PNY 1gb for a while now.  It's now on my c1000.

works very good on the sl5500.

been wanting to get rid of it for 50 dollars but nobody wants it  

im looking for a 4gb sd but i seen a 2gb at the moment for 217.  it looks good.

if anybody still interested, i sell it for 45 plus shipping.

so email me at cresho@earthlink.net and post her that you purchased it.  i live in california.  los angeles area that is. the paypal thingy is the same as my email and well get things settled.

if interested...

best buy employes are mostly .....not knowledgable enough. especially when it comes to the z.
« Last Edit: July 20, 2005, 06:49:52 am by Cresho »
Zaurus C-3200 (internal 8gb seagate drive) with buuf icon theme, cacko 1.23 full,  and also Meanie's pdaxqtrom-Debian/Open Office
Zaurus SL-5500 Sharp Rom 3.13 with steel theme
pretec pocket pc wi fi
ambicom bt2000-cf bluetooth-made in taiwan
simpletech 1gb cf
pny 1gb sd
patriot 2gb
ocz or patriot 4gb sd(failed after 2 weeks)only on z
creative csw-5300 speakers in stereo
DigiLife DDV-1000 for video, Audio, Picture recording playable on the zaurus
Mustek DV4500-video recorder, pictures, voice record on sd for z

zaurusthemes.biz | ZaurusVideo | Zaurus Software

Mag1c

  • Newbie
  • *
  • Posts: 30
    • View Profile
    • http://
Sd Card Fails On Insert
« Reply #8 on: July 20, 2005, 08:22:14 am »
Quote
Quote
Looks like the SD-port on your Zaurus is dead.[div align=\"right\"][a href=\"index.php?act=findpost&pid=88895\"][{POST_SNAPBACK}][/a][/div]
Gee, can I have a crystal ball just like yours?

Uups, sorry. I thought, I had read that he tested two different cards.
So you are right. It could be either SD-Card or SD-Port or the combination of them.

greets
Mag1c

colm

  • Newbie
  • *
  • Posts: 14
    • View Profile
Sd Card Fails On Insert
« Reply #9 on: July 20, 2005, 01:28:59 pm »
Quote
Quote
Quote
Looks like the SD-port on your Zaurus is dead.[div align=\"right\"][a href=\"index.php?act=findpost&pid=88895\"][{POST_SNAPBACK}][/a][/div]
Gee, can I have a crystal ball just like yours?

Uups, sorry. I thought, I had read that he tested two different cards.
So you are right. It could be either SD-Card or SD-Port or the combination of them.

greets
Mag1c
[div align=\"right\"][a href=\"index.php?act=findpost&pid=88918\"][{POST_SNAPBACK}][/a][/div]


OK, tried the SD card, works a treat in a compaq laptop.  So that means I can at least re-sell and try again.

Tried a 64MB Lexar branded SD in my Z and that works too, so it just looks like this particular card is not compatible

So Overall I'm happy, but wiser

I've seen some talk about another driver for SD but can't track down the details - think that's worth a pop before I get another card?

back to sharp rom again...

Thanks for the responses folks.

misterearl

  • Newbie
  • *
  • Posts: 37
    • View Profile
Sd Card Fails On Insert
« Reply #10 on: July 20, 2005, 10:27:45 pm »
FWIW the Kingston 512MB SD card (bought from Buy.com for $16.25 after rebates a week ago) works perfectly in my SL-5500 running Sharp ROM V3.13.  A Kodak 64MB CF card functions perfectly as well.

Lee


Sorry, make that a Viking 512MB SD card...
« Last Edit: July 20, 2005, 10:30:07 pm by misterearl »
[span style=\'font-size:8pt;line-height:100%\']SL-5500 running Sharp ROM v3.13
512MB Viking SD Card
64MB Kodak CF Card
Billionton/Ambicom CF GPS
Symbol Spectrum Networker CF Wifi Card
Ambicom CF56M-EZ CF Modem
[/span]

colm

  • Newbie
  • *
  • Posts: 14
    • View Profile
Sd Card Fails On Insert
« Reply #11 on: August 07, 2005, 11:26:04 am »
Hi Folks,

Got a Sandisk 1GB SD Card (£79.99 from ASDA (walmart) photo shop).  Works a treat, so I'm a happy bunny!

FWIW, the other SD card also fails in an iPAQ 3600, so it's not just the Z being picky, works every other place I tried though.


Question now is - /root on /mnt/card - 64MB ram...  LAMP on the Z...  these are all my aims whilst also continuing to run hancom stuff, I'll report back with a howto when I get all this working, the info is spread far and wide out there!

--
Colm

niv

  • Full Member
  • ***
  • Posts: 237
    • View Profile
Sd Card Fails On Insert
« Reply #12 on: August 11, 2005, 04:20:20 pm »
Sad to report its a no god for the Ridata 1Gb X66 SD :-)
Kingston 512Mb Works fine..

Need we add it to the wiki?

comcute

  • Newbie
  • *
  • Posts: 14
    • View Profile
    • http://
Sd Card Fails On Insert
« Reply #13 on: September 07, 2005, 10:37:11 am »
Hi
Has somebody tested Kingston 1GB ELITE PRO SECUREDIGITAL MEMORY CARD?  http://www.kingston.com/digitalmedia/sdelitepro.asp
Does it work with collie?

Thanks

EDIT: Damn, seems not, dmesg gives me a lots of write errors. I have to return it.
« Last Edit: September 13, 2005, 09:06:33 am by comcute »
SL-5500 running OpenZaurus 3.5.3
SMC EZ Connect (SMC2642w) 802.1b CF card
Sandisk 1GB SD card

telemetric_au

  • Sr. Member
  • ****
  • Posts: 327
    • View Profile
    • http://www.tyrannozaurus.com/feed/contribs/telemetric/index.htm
Sd Card Fails On Insert
« Reply #14 on: March 19, 2006, 04:28:12 am »
what about a 1GB Kingston Ultimate SD in the 5500 or any other Z ??
Collie w/ pdaxrom & Puppy OS w/ cross-sdk
Hawking HCF686TX 10/100, Ambicom 802.11b (WL1100C-CF), Xircom 56K Global CF
Kingston CF Elite Pro & SD 1Gb & 128mb for flashing
$2 screen protector, collie.pdaxrom.feed : my collie pdaxrom site