Author Topic: Cacko Rom 1.23 Is Released (Read 245943 times)

ezeerb · « **Reply #225 on:** August 09, 2006, 01:52:20 am »

Try something like:

mkdir /mnt/hda1
mount /dev/hda1 /mnt/hda1
cp -a /dev/hdc1/hddsys/* /mnt/hda1/

[div align=\"right\"][a href=\"index.php?act=findpost&pid=137882\"][{POST_SNAPBACK}][/a][/div]

Many THANKS to those of you how hopped on and helped through the process. You all were most helpful and encouraging. I have my Zaurus back.

I don't want to admit the time I spent on it. But I learned a lot.

The helpfulness of the 'community' was most impressive. Again THANKS.

ezeerb · « **Reply #226 on:** August 09, 2006, 01:55:24 am »

Quote

Don't forget that everything in hdd1sys needs to be in a directory named .sys .
[div align=\"right\"][a href=\"index.php?act=findpost&pid=137886\"][{POST_SNAPBACK}][/a][/div]

Thanks Barry. I figured it out when it dien't initialize and went back to the Trisoft information to see what I had done wrong. Two hours later... I was up.

Trisoft's files are most helpful. The Rom they use is 1.01, but not a problem to update that to 1.02.

Then I did a Maintance (OK-On), Format (3), Normal (1) and got all the directories etc back just like new. Just need to add the dictionary get back to Meanie's sige and get some programs...

gettons1980 · « **Reply #227 on:** August 25, 2006, 08:43:02 pm »

hi , can I know what is the differences beetween
Cacko ROM 1.23
and
CACkO Zaurus Qtopia ROM 1.23 1029311005
I can see both support sl-c1000, but what is the greatest differce?

Thx in advance

mtrojnar · « **Reply #228 on:** August 30, 2006, 11:16:15 am »

I have a problem with my D-Link DWL-122 USB WLAN adapter on Akita.

ChangeLog for new new Cacko claims "Added support for Prism3 WiFi", but my adapter doesn't seem to work. The error is:

wlan0: Cannot read hardware identity: error -95
wlan0: Incompatible firmware, aborting

I was unable to find any working solution for this problem. On my home PC it works fine with the latest wlan-ng drivers.

Please help,
Mike

portalgod · « **Reply #229 on:** August 30, 2006, 02:55:30 pm »

I just put Cacko on my SL-C1000 and I installed the Tetsu kernel patch to "recognize" (I can't come up with a better word) the full 4GB of my SD card.

I can read/write to the card in the Files tab or via command line.

Using Package Manager however, any time I try to install any package to the SD card it complains not enough space on the card however df -h shows the 4GB having 3.7GB free (i just got the card, nothing on it yet).

I can install to internal flash no problem, just not to the 4GB SD card.

The card is formatted FAT or VFAT I believe (I don't have the Z with me right now), do I have to have it ext2 or so for packages to be installed?

Has anyone experienced this?

Sy Ali · « **Reply #230 on:** August 30, 2006, 04:09:37 pm »

portal:

No you do not have to have ext2 to install software to the card. However, some software requires ext2 to be installed. Not all software requires this, but only some..

When I tried installing software.. some of my software worked, and some software told me that it would not work. So I think your free space issue is some other problem.

Magellan · « **Reply #231 on:** September 01, 2006, 10:26:50 am »

I installed this on my old C750 and it works great! I have not had any issues with it, everything seems to work as it should.

Rebecca · « **Reply #232 on:** September 30, 2006, 10:24:01 am »

And I am still waiting for the Cacko 1.23 for my C3000.

Today is the September, 30, 2006

Rebecca

Sy Ali · « **Reply #233 on:** September 30, 2006, 02:54:05 pm »

I thought Cacko supported the c3000 already..

AndyTiedye · « **Reply #234 on:** October 05, 2006, 07:22:44 pm »

Quote

I thought Cacko supported the c3000 already..
[div align=\"right\"][a href=\"index.php?act=findpost&pid=142731\"][{POST_SNAPBACK}][/a][/div]

All I ever heard of was a very old beta.
Not sure how stable it is.

el_borak · « **Reply #235 on:** October 17, 2006, 02:42:27 pm »

Has anyone compiled a tun.o module for the C860 version of Cacko 1.23? I'll compile one myself if I have to, but I'd prefer to avoid the time of setting up the tool chain if it's not necessary.

Thanks.

Cyberdoc1971 · « **Reply #236 on:** October 17, 2006, 03:52:17 pm »

I noticed it's been a while since 1.23 was released, is there a new version in the works?

loriolson · « **Reply #237 on:** January 02, 2007, 12:25:44 am »

Is there a problem with the Cacko downloads? I can't find 1.23 for the C750 anywhere. All I get are broken/missing links.

Jon_J · « **Reply #238 on:** January 02, 2007, 01:13:14 am »

Quote

Is there a problem with the Cacko downloads? I can't find 1.23 for the C750 anywhere. All I get are broken/missing links.
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

Look here:
[a href=\"https://www.oesf.org/forums/index.php?showtopic=22458&view=findpost&p=149336]https://www.oesf.org/forums/index.php?showt...ndpost&p=149336[/url]

The cacko links are broken at the regular cacko site, due to oesf.org being moved to the new site.

Snappy · « **Reply #239 on:** January 02, 2007, 03:34:21 am »

Mike,

This is belated but as I see no replies ... if you still have problems, try a 'cardctl ident' at the console/terminal without the quotes and post it here.

Quote

I have a problem with my D-Link DWL-122 USB WLAN adapter on Akita.

ChangeLog for new new Cacko claims "Added support for Prism3 WiFi", but my adapter doesn't seem to work. The error is:

wlan0: Cannot read hardware identity: error -95
wlan0: Incompatible firmware, aborting

I was unable to find any working solution for this problem. On my home PC it works fine with the latest wlan-ng drivers.

Please help,
Mike
[div align=\"right\"][a href=\"index.php?act=findpost&pid=140190\"][{POST_SNAPBACK}][/a][/div]

News:

Author Topic: Cacko Rom 1.23 Is Released (Read 245943 times)