← previous next →
Pages: 1 ... 9 10 [11] 12 13 14

Author Topic: 2gb And Up Sd Cards Supported  (Read 109217 times)

kahm

  • Hero Member
  • *****
  • Posts: 657
    • View Profile
2gb And Up Sd Cards Supported
« Reply #150 on: November 25, 2006, 08:27:39 pm »
Quote
Quote
Sounds like the CF driver in the backup code doesn't check the size of the device and just writes off the end of it - the drive then ignores the top bit of the address and wraps around to the beginning, right where the partition table is.

It's not likely to happen on an SD card, as those are serially addressed.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=146902\"][{POST_SNAPBACK}][/a][/div]

good theory but the backup code did throw an error in red letters saying the destination was full.

I am wondering if the function is intended to make a raw copy of the internal drive onto an external one, rather than make a backup file... but then I'd have expected the CF card to look like a corrupted multi-partition microdrive than a unformatted/unpartitioned corrupted mess?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=146919\"][{POST_SNAPBACK}][/a][/div]

I did one of those D&M backups with a 6gb MD. I've now got a 4gb partition on the MD with an exact copy of the internal drive. I suspect what is going on is the Z is using "dd" (or some equivalent) to copy the drive's contents verbatim, including partition info.
Logged
Fujitsu U8240 "Stormtrooper" -  Zaurus Supplement
Libretto U100 | Sony Librie, Sony Reader
SL-C3100: Sharp 1.11JP (Kanji Dictionary/Translator) - LCD Top swap with C1000.
SL-C3000: pdaXii13 5.4.7, SL-C3000 5.4.9 - microdrive replaced with 8gb Sandisk
SL-C1000: PDAXRom Beta3 | SL-6000L: Sharp 1.12 | SL-5500: Cacko, 64-0 kernel | SL-5000D: OZ-Opie
Linksys WCF12; Sharp CE-AG06, CE-RH2, CE-170TS; iRiver USB OTG Host cable; Socket BT rev.E CF; Hitachi 6gb Microdrive

speculatrix

  • Administrator
  • Hero Member
  • *****
  • Posts: 3707
    • View Profile
2gb And Up Sd Cards Supported
« Reply #151 on: November 26, 2006, 05:14:26 pm »
Quote
I did one of those D&M backups with a 6gb MD. I've now got a 4gb partition on the MD with an exact copy of the internal drive. I suspect what is going on is the Z is using "dd" (or some equivalent) to copy the drive's contents verbatim, including partition info.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=147239\"][{POST_SNAPBACK}][/a][/div]

thanks for that, so yes, the D+M backup is just a raw sector copy.I think I'll just rsync the contents over, as I want to preserve the original c3100 contents before repartitioning it.
Logged
Gemini 4G/Wi-Fi owner, formerly zaurus C3100 and 860 owner; also owner of an HTC Doubleshot, a Zaurus-like phone.

Ling

  • Sr. Member
  • ****
  • Posts: 350
    • View Profile
    • http://
2gb And Up Sd Cards Supported
« Reply #152 on: December 07, 2006, 10:01:34 pm »
I have an A-Data 4GB myFlash Turbo SD 150x. From reading through the posts, it would appear that it works. I downloaded the driver from (I think) Meanies site. The installed driver says sdmmc-module ver 2.4.20. I have Cacko 1.23 installed on my 3200. I put in the card and it does not show up. I attempt to mount /dev/mmcda1 and it says "No such device'. dmesg|tail says (many times):

pxa_sd_wait_id_response:responce time out (cmd=01 MMC_STAT=0x2142)

Can't fdisk, etc. My digital camera sees it, wants to format it, but can't. Any ideas?
Logged
SL-C3200 w/ pdaXii13 5.3
SL-C860 w/ OZ GPE 3.4.1
Accessories: 4GB Microdrive, 4GB Transcend SD, Linksys WFC12 CF 802.11b, Ambicom CF Modem, Socket Bluetooth

Cresho

  • Hero Member
  • *****
  • Posts: 1609
    • View Profile
    • http://home.earthlink.net/~cresho/
2gb And Up Sd Cards Supported
« Reply #153 on: December 07, 2006, 10:11:15 pm »
get another card.  you need trial and error..there is no difinitive list of working 4gb cards since the crowd is small here.
Logged
Zaurus C-3200 (internal 8gb seagate drive) with buuf icon theme, cacko 1.23 full,  and also Meanie's pdaxqtrom-Debian/Open Office
Zaurus SL-5500 Sharp Rom 3.13 with steel theme
pretec pocket pc wi fi
ambicom bt2000-cf bluetooth-made in taiwan
simpletech 1gb cf
pny 1gb sd
patriot 2gb
ocz or patriot 4gb sd(failed after 2 weeks)only on z
creative csw-5300 speakers in stereo
DigiLife DDV-1000 for video, Audio, Picture recording playable on the zaurus
Mustek DV4500-video recorder, pictures, voice record on sd for z

zaurusthemes.biz | ZaurusVideo | Zaurus Software

Meanie

  • Hero Member
  • *****
  • Posts: 2803
    • View Profile
    • http://www.users.on.net/~hluc/myZaurus/
2gb And Up Sd Cards Supported
« Reply #154 on: December 07, 2006, 10:45:16 pm »
Quote
I have an A-Data 4GB myFlash Turbo SD 150x. From reading through the posts, it would appear that it works. I downloaded the driver from (I think) Meanies site. The installed driver says sdmmc-module ver 2.4.20. I have Cacko 1.23 installed on my 3200. I put in the card and it does not show up. I attempt to mount /dev/mmcda1 and it says "No such device'. dmesg|tail says (many times):

pxa_sd_wait_id_response:responce time out (cmd=01 MMC_STAT=0x2142)

Can't fdisk, etc. My digital camera sees it, wants to format it, but can't. Any ideas?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=148460\"][{POST_SNAPBACK}][/a][/div]

get another Zaurus, you need a C3x00/C1000 in order for that module to work.
« Last Edit: December 07, 2006, 10:59:25 pm by Cresho »
Logged
SL-C3000 - pdaXii13 build5.4.9 (based on pdaXrom beta3) / SL-C3100 - Sharp ROM 1.02 JP (heavily customised)
Netgear MA701 CF, SanDisk ConnectPlus CF, Socket Bluetooth CF, 4GB Kingston CF,  4GB pqi SD, 4GB ChoiceOnly SD, 2GB SanDisk SD USB Plus, 1GB SanDisk USB Plus, 1GB Transcend SD, 2GB SanDisk MicroSD with SD adaptor, Piel Frama Leather Case, GoldX 5-in-1 USB cable, USB hub, USB mouse, USB keyboard, USB ethernet, USB HDD, many other USB accessories...
(Zaurus SL-C3000 owner since March 14. 2005, Zaurus SL-C3100 owner since September 21. 2005)
http://members.iinet.net.au/~wyso/myZaurus - zBook3K

speculatrix

  • Administrator
  • Hero Member
  • *****
  • Posts: 3707
    • View Profile
2gb And Up Sd Cards Supported
« Reply #155 on: December 08, 2006, 05:32:11 am »
Quote
I have an A-Data 4GB myFlash Turbo SD 150x. From reading through the posts, it would appear that it works. I downloaded the driver from (I think) Meanies site. The installed driver says sdmmc-module ver 2.4.20. I have Cacko 1.23 installed on my 3200. I put in the card and it does not show up. I attempt to mount /dev/mmcda1 and it says "No such device'. dmesg|tail says (many times):

pxa_sd_wait_id_response:responce time out (cmd=01 MMC_STAT=0x2142)

Can't fdisk, etc. My digital camera sees it, wants to format it, but can't. Any ideas?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=148460\"][{POST_SNAPBACK}][/a][/div]

you need to reboot the Z after installing the patch?

it definitely works on my 3100 with cacko1.23, I tested using a 4GB card which also works in wife's Canon IXUS-750 digicam

BTW, it's formatted fat-32
« Last Edit: December 08, 2006, 05:32:31 am by speculatrix »
Logged
Gemini 4G/Wi-Fi owner, formerly zaurus C3100 and 860 owner; also owner of an HTC Doubleshot, a Zaurus-like phone.

Ling

  • Sr. Member
  • ****
  • Posts: 350
    • View Profile
    • http://
2gb And Up Sd Cards Supported
« Reply #156 on: December 08, 2006, 08:28:29 pm »
Quote
Quote
I have an A-Data 4GB myFlash Turbo SD 150x. From reading through the posts, it would appear that it works. I downloaded the driver from (I think) Meanies site. The installed driver says sdmmc-module ver 2.4.20. I have Cacko 1.23 installed on my 3200. I put in the card and it does not show up. I attempt to mount /dev/mmcda1 and it says "No such device'. dmesg|tail says (many times):

pxa_sd_wait_id_response:responce time out (cmd=01 MMC_STAT=0x2142)

Can't fdisk, etc. My digital camera sees it, wants to format it, but can't. Any ideas?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=148460\"][{POST_SNAPBACK}][/a][/div]

get another Zaurus, you need a C3x00/C1000 in order for that module to work.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=148463\"][{POST_SNAPBACK}][/a][/div]

I thought that an SL-C3200 was a C3x00? Since 4GB cards are at least $50 delivered, I can't afford to just keep buying them. I will read through the posts and see what folks have gotten to work and narrow the search. In my search I have seen a few discussions about tactics used to resurrect/format cards, I was hoping that you guys could give me some ideas on a last ditch effort to get this card to work. I will keep fooling with it before I give up. Thanks.
Logged
SL-C3200 w/ pdaXii13 5.3
SL-C860 w/ OZ GPE 3.4.1
Accessories: 4GB Microdrive, 4GB Transcend SD, Linksys WFC12 CF 802.11b, Ambicom CF Modem, Socket Bluetooth

harvell

  • Full Member
  • ***
  • Posts: 241
    • View Profile
    • http://
2gb And Up Sd Cards Supported
« Reply #157 on: December 08, 2006, 09:06:28 pm »
Quote
I thought that an SL-C3200 was a C3x00? Since 4GB cards are at least $50 delivered, I can't afford to just keep buying them. I will read through the posts and see what folks have gotten to work and narrow the search. In my search I have seen a few discussions about tactics used to resurrect/format cards, I was hoping that you guys could give me some ideas on a last ditch effort to get this card to work. I will keep fooling with it before I give up. Thanks.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=148579\"][{POST_SNAPBACK}][/a][/div]


I think they were looking at your handle.  It says you have a C860..  
Logged
C1000 w/...  Cacko Lite (When I use the Z alot for business)... pdaXrom (when I see something cool and want to try it.  Best way for me to learn shell commands)
Eee PC for Mrs. Harvell  
4G SD

speculatrix

  • Administrator
  • Hero Member
  • *****
  • Posts: 3707
    • View Profile
2gb And Up Sd Cards Supported
« Reply #158 on: December 09, 2006, 05:03:23 pm »
another thing, once you've got the correct driver loaded, is to ensure that the card has a partition table - windows will cheerfully mount a fat32 formatted card where the card is entirely given over to the file system, linux wont. Use "fdisk" to create a partition, then "mkfs.vfat" to format it.
Logged
Gemini 4G/Wi-Fi owner, formerly zaurus C3100 and 860 owner; also owner of an HTC Doubleshot, a Zaurus-like phone.

Ling

  • Sr. Member
  • ****
  • Posts: 350
    • View Profile
    • http://
2gb And Up Sd Cards Supported
« Reply #159 on: December 25, 2006, 03:10:19 pm »
Since attachments don't seem to be working, is there somewhere else to download Cresho's patch. The link from Tetsu's page is dead, so I can't even download his. Unfortunately the link from handheld software points right back to here. I can't find it in the pdaXrom repositories.
Logged
SL-C3200 w/ pdaXii13 5.3
SL-C860 w/ OZ GPE 3.4.1
Accessories: 4GB Microdrive, 4GB Transcend SD, Linksys WFC12 CF 802.11b, Ambicom CF Modem, Socket Bluetooth

Jon_J

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
    • http://
2gb And Up Sd Cards Supported
« Reply #160 on: December 25, 2006, 03:42:37 pm »
Quote
Since attachments don't seem to be working, is there somewhere else to download Cresho's patch. The link from Tetsu's page is dead, so I can't even download his. Unfortunately the link from handheld software points right back to here. I can't find it in the pdaXrom repositories.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=149067\"][{POST_SNAPBACK}][/a][/div]
I tried sending you a copy of the tetsu driver using the private messaging system, I'm not sure if it went through.
Here's the filename, in case you want to google for it.
zaurus_sd_driver_update_cxxxx_1.0+tetsu_arm.ipk

I also tried to attach it here, that didn't work either.
Logged
C3100 Multiboot-->Angstrom 2007.12-r18 | Cacko 1.23 | ArchLinuxARM
C3200 pdaxii13v2-5.5-alpha4 Akita on NAND
Ambicom WL1100C-CF Wifi - Ambicom CF modem - Ambicom CF GPS - Belkin-F5D5050 USB LAN
Socket CF Bluetooth rev K - Iogear 4 port USB micro hub - pocket CF card reader
Targus mini USB optical mouse - 2 Targus SD card readers

Jon_J

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
    • http://
2gb And Up Sd Cards Supported
« Reply #161 on: December 25, 2006, 03:49:08 pm »
Logged
C3100 Multiboot-->Angstrom 2007.12-r18 | Cacko 1.23 | ArchLinuxARM
C3200 pdaxii13v2-5.5-alpha4 Akita on NAND
Ambicom WL1100C-CF Wifi - Ambicom CF modem - Ambicom CF GPS - Belkin-F5D5050 USB LAN
Socket CF Bluetooth rev K - Iogear 4 port USB micro hub - pocket CF card reader
Targus mini USB optical mouse - 2 Targus SD card readers

Ling

  • Sr. Member
  • ****
  • Posts: 350
    • View Profile
    • http://
2gb And Up Sd Cards Supported
« Reply #162 on: December 25, 2006, 05:25:43 pm »
Quote
I found it here:
http://tetsu.homelinux.org/zaurus/kernel/v...0+tetsu_arm.zip
[div align=\"right\"][a href=\"index.php?act=findpost&pid=149070\"][{POST_SNAPBACK}][/a][/div]

Jon,

I was able to download it. Thanks for your help.
Logged
SL-C3200 w/ pdaXii13 5.3
SL-C860 w/ OZ GPE 3.4.1
Accessories: 4GB Microdrive, 4GB Transcend SD, Linksys WFC12 CF 802.11b, Ambicom CF Modem, Socket Bluetooth

speculatrix

  • Administrator
  • Hero Member
  • *****
  • Posts: 3707
    • View Profile
2gb And Up Sd Cards Supported
« Reply #163 on: December 27, 2006, 04:55:30 am »
I put a copy in my downloads
Logged
Gemini 4G/Wi-Fi owner, formerly zaurus C3100 and 860 owner; also owner of an HTC Doubleshot, a Zaurus-like phone.

dougeeebear

  • Hero Member
  • *****
  • Posts: 537
    • View Profile
    • http://
2gb And Up Sd Cards Supported
« Reply #164 on: January 05, 2007, 12:47:43 pm »
I am thinking about purchasing a 4gb Transcend SD card here, which is supposed to work, but after reading all the negative posts about problems with 4gb cards, I'm wondering if I am just wasting my time and money on something that may or may not work.
Or maybe it will work for awhile then quit.

The driver is greatly appreciated, and would be awesome if I thought it would "just work", but there are no guarantees even with this card that has already been mentioned to work.

Hmmm... what to do???  

EDIT:
Well, I ordered it anyway.
If it doesn't work correctly in the SD slot on my Z, it's bound to work in my USB SD card reader or in the SD slot on my laptop.
« Last Edit: January 05, 2007, 02:14:01 pm by dougeeebear »
Logged
Zaurus SL-C1000 and SL-5500
NetWalker PC-T1 (tablet)
Pages: 1 ... 9 10 [11] 12 13 14
← previous next →