What about looking in the script and replacing every hdd3 with hdd4?
[div align=\"right\"][a href=\"index.php?act=findpost&pid=158224\"][{POST_SNAPBACK}][/a][/div]
I WISH it were that easy.
(Oh and btw I'm using the non-loopback version of the files when possible that are *.tgz)
Here's the script in question for general consumption just in case someone more script savvy than I can help me:
__________________________________________________________
(pdaXqtrom-install.sh)
__________________________________________________________
#!/bin/sh
FILES="pdaXqtrom-base pdaXqtrom-apps zgcc2-95-3 java dictionaries openoffice games"
echo "X/Qt super jumbo installer - version 0.3.6.4"
if [ "`id -u`" != "0" ]; then
echo "error: you have to be root to run this!"
exit 1
fi
if [ "`which awk`" = "" ]; then
echo "error: awk not found! please install it first."
exit 1
fi
if [ "`which wc`" = "" ]; then
echo "warning: wc not found!"
fi
if [ "`which mount`" = "" ]; then
echo "warning: mount not found!"
fi
unzip_image()
{
if [ -f $1.zip ] && [ ! -f $1 ]; then
echo "...found $1.zip"
if [ "`which unzip`" = "" ]; then
echo "error: unzip not found!"
exit 1
else
echo "...uncompressing"
unzip $1.zip
fi
fi
}
ungzip_image()
{
if [ -f $1.gz ] && [ ! -f $1 ]; then
echo "...found $1.gz"
if [ "`which gzip`" = "" ]; then
echo "error: gzip not found!"
exit 1
else
echo "...uncompressing"
gzip -d $1.gz
fi
fi
}
untgz_image()
{
if [ -f $1.tgz ] && [ ! -f $1 ]; then
echo "...found $1.tgz"
if [ "`which zcat`" = "" ] || [ "`which tar`" = "" ]; then
echo "error: zcat or tar not found!"
exit 1
else
echo "...uncompressing"
zcat $1.tgz|tar xf -
fi
fi
}
untargz_image()
{
if [ -f $1.tar.gz ] && [ ! -f $1 ]; then
echo "...found $1.tar.gz"
if [ "`which zcat`" = "" ] || [ "`which tar`" = "" ]; then
echo "error: zcat or tar not found!"
exit 1
else
echo "...uncompressing"
zcat $1.tar.gz|tar xf -
fi
fi
}
MOUNTBASE=/mnt
if [ -f /etc/rc.d/init.d/mntloop ]; then
echo "automounter is installed."
echo "stopping loop devices..."
if [ "`which automounter`" != "" ]; then
automounter stop
else
echo "old version of automounter detected, please update"
/etc/rc.d/init.d/mntloop stop
fi
else
echo "automounter is not installed."
echo "it is recommended to install automounter or something similar"
fi
IMAGES=0
for i in $FILES
do
CHECK=`ls ${i}* 2>/dev/null| wc -l`
if [ $CHECK -ne 0 ]; then
IMAGES=`echo $IMAGES|awk '{print $1+1}'`
fi
done
LOOPS=`ls /dev/loop* -l|wc -l|awk '{print $1}'`
echo "The system has $LOOPS loop devices."
echo "There are $IMAGES cramfs/squashfs images."
if [ $LOOPS -lt $IMAGES ]; then
if [ "`which mknod`" = "" ]; then
echo "error: mknod not found!"
exit 1
else
echo ""
echo "...creating additional loop devices"
for i in 2 3 4 5 6
do
if [ ! -e /dev/loop$i ]; then
echo " mknod /dev/loop$i b 7 $i"
mknod /dev/loop$i b 7 $i 2>/dev/null
fi
done
echo ""
echo "You will need to recreate the additional loop devices after each reboot!"
fi
fi
if [ -d /etc/X11 ]; then
echo "...purging /etc/X11"
rm -r /etc/X11
fi
if [ -f /home/root/.xinitrc ]; then
rm /home/root/.xinitrc
fi
if [ -f /home/zaurus/.xinitrc ]; then
rm /home/zaurus/.xinitrc
fi
if [ ! -f /home/zaurus/.profile ]; then
touch /home/zaurus/.profile
chown zaurus:qpe /home/zaurus/.profile
fi
if [ "`grep LC_ALL /home/zaurus/.profile`" = "" ]; then
echo "export LC_ALL=C" >> /home/zaurus/.profile
fi
if [ "`grep LANGUAGE /home/zaurus/.profile`" = "" ]; then
echo "export LANGUAGE=C" >> /home/zaurus/.profile
fi
if [ "`grep LC_ALL /home/root/.profile`" = "" ]; then
echo "export LC_ALL=C" >> /home/root/.profile
export LC_ALL=C
fi
if [ "`grep LANGUAGE /home/root/.profile`" = "" ]; then
echo "export LANGUAGE=C" >> /home/root/.profile
export LANGUAGE=C
fi
mkdir -p /usr/share/stardict 2>/dev/null
mkdir -p /usr/local/share/stardict 2>/dev/null
for i in $FILES
do
XQTJUMBO=$i
XQTCRAM=$XQTJUMBO.cramfs
XQTSQUASH=$XQTJUMBO.squashfs
XQTMOUNT=$MOUNTBASE/$XQTJUMBO
if [ "`echo $XQTJUMBO|grep zgcc`" != "" ]; then
XQTMOUNT=/mnt/zgcc
fi
echo "...checking for $XQTJUMBO"
unzip_image $XQTCRAM
unzip_image $XQTSQUASH
#untgz_image $XQTCRAM
#untgz_image $XQTSQUASH
#untargz_image $XQTCRAM
#untargz_image $XQTSQUASH
ungzip_image $XQTCRAM
ungzip_image $XQTSQUASH
if [ -f $XQTSQUASH ] && [ -f $XQTCRAM ]; then
echo "error: $XQTSQUASH and $XQTCRAM found! cannot determine which one to install."
fi
if [ ! -f $XQTSQUASH ] && [ -f $XQTCRAM ]; then
echo "...installing $XQTJUMBO to `pwd`"
if [ ! -d $XQTMOUNT ]; then
mkdir -p $XQTMOUNT
fi
if [ "`grep $XQTCRAM /etc/fstab`" = "" ]; then
echo "`pwd`/$XQTCRAM $XQTMOUNT cramfs loop 0 0" >> /etc/fstab
fi
CRAM=`basename $XQTCRAM`
if [ "`grep $CRAM /etc/fstab|grep -v '#'|wc -l|awk '{print $1}'`" != "1" ]; then
echo "Warning: ambiguous entry for $CRAM found in /etc/fstab"
fi
if [ "`mount|grep $XQTMOUNT`" = "" ]; then
mount `pwd`/$XQTCRAM
fi
for i in `ls $XQTMOUNT/*-setup 2>/dev/null`
do
SETUP=$i
if [ "$SETUP" != "" ] && [ -f $SETUP ]; then
$SETUP
fi
done
fi
if [ ! -f $XQTCRAM ] && [ -f $XQTSQUASH ]; then
echo "...installing $XQTJUMBO to `pwd`"
if [ ! -d $XQTMOUNT ]; then
mkdir -p $XQTMOUNT
fi
if [ "`grep $XQTSQUASH /etc/fstab`" = "" ]; then
echo "`pwd`/$XQTSQUASH $XQTMOUNT squashfs loop 0 0" >> /etc/fstab
fi
SQUASHB=`basename $XQTSQUASH`
if [ "`grep $SQUASHB /etc/fstab|grep -v '#'|wc -l|awk '{print $1}'`" != "1" ]; then
echo "Warning: ambiguous entry for $SQUASHB found in /etc/fstab"
fi
if [ "`mount|grep $XQTMOUNT`" = "" ]; then
mount `pwd`/$XQTSQUASH
fi
for i in `ls $XQTMOUNT/*-setup 2>/dev/null`
do
SETUP=$i
if [ "$SETUP" != "" ] && [ -f $SETUP ]; then
$SETUP
fi
done
fi
if [ ! -f $XQTCRAM ] && [ ! -f $XQTSQUASH ]; then
if [ -f $XQTJUMBO.tar.gz ] || [ -f $XQTJUMBO.tgz ]; then
if [ -f /etc/xipk.conf ] && [ -d "`cat /etc/xipk.conf`" ]; then
XQTINST=`cat /etc/xipk.conf`
echo "...installing and extracting $XQTJUMBO to $XQTINST"
touch $XQTINST/ltest
if [ "$?" != "0" ]; then
echo "error: read-only filesystem!"
exit 1
fi
ln -s $XQTINST/ltest $XQTINST/lltest
if [ "$?" != "0" ]; then
rm $XQTINST/ltest 2>/dev/null
echo "error: not a linux filesystem!"
exit 1
else
rm $XQTINST/lltest 2>/dev/null
rm $XQTINST/ltest 2>/dev/null
fi
if [ -f $XQTJUMBO.tar.gz ]; then
echo "...extracting $XQTJUMBO.tar.gz"
zcat `pwd`/$XQTJUMBO.tar.gz|tar xvf - -C $XQTINST
fi
if [ -f $XQTJUMBO.tgz ]; then
echo "...extracting $XQTJUMBO.tgz"
zcat `pwd`/$XQTJUMBO.tgz|tar xvf - -C $XQTINST
fi
for i in `ls $XQTINST/*-setup 2>/dev/null`
do
SETUP=$i
if [ "$SETUP" != "" ] && [ -f $SETUP ] && [ "$XQTINST" != "/" ]; then
echo "...running $SETUP"
$SETUP
fi
done
else
echo "error: installation directory not specified in /etc/xipk.conf"
exit 1
fi
else
echo "$XQTJUMBO not found!"
fi
fi
done
if [ "`which automounter`" != "" ]; then
echo "remounting loop devices..."
automounter start
else
if [ -f /etc/rc.d/init.d/mntloop ]; then
/etc/rc.d/init.d/mntloop start
fi
fi
echo ""
echo "X/Qt installed and configured (if found)."
echo "use xlauncher or the StartX icon to start it."
echo ""
____________________________________________________________