Author Topic: How To Restore 6000 To Original State? (Read 60182 times)

BarryW · « **Reply #30 on:** December 04, 2004, 02:00:03 am »

From nevarrie's site, the 1.12 rom.

http://zaurus.thegrantclan.org/download/zaurus/roms/tosa/

crow · « **Reply #31 on:** December 04, 2004, 05:30:46 pm »

BarryW, a big thank you to both you and nevarrie!

jbruno · « **Reply #32 on:** December 12, 2004, 09:23:49 am »

I'd like to experiment with other ROMs on my new 6000, but I don't know how to restore it to its original state (i.e., ROM as shipped from factory.)

Is there some document somewhere that shows how to do this? I've just left the ROM on there that came with it, out of fear of breaking the thing.

Any help would be appreciated!

soundwave106 · « **Reply #33 on:** December 12, 2004, 09:44:45 pm »

I think a hard reset does that? (Press the "reset" button on the back while holding power on + rec)

fhann36 · « **Reply #34 on:** December 13, 2004, 08:21:27 pm »

Press d and P keys while resetting, it will take you to a menu to restore NAND.
Not sure If you need the original ROM though

fhann36 · « **Reply #35 on:** December 13, 2004, 08:24:27 pm »

First backup your NAND. This will be the ROM you use to restore the original sharp ROM after your done experimenting

jbruno · « **Reply #36 on:** December 13, 2004, 09:53:01 pm »

Thanks, everybody. I'll try this tomorrow (backing up what I have) and immediately restoring before getting my feet we w/new roms.

I did this with my 5000 many times, but I am being more careful with the 6000 - it was more expensive!

antoine · « **Reply #37 on:** December 13, 2004, 10:20:01 pm »

I've flashed my (new) SL-6000L with the OpenZaurus ROM v3.5.2 and it worked, unfortunately, I haven't a chance to backup it before too soon to happy to get it... and maybe too stupid also I am.
Now I'd like to come back to original stuffs (especially for wifi and opera support), could you please help me finding out the original Sharp ROM. I mean what is DevNet, do you have an URL or something.
Please advise, I'm lost (mainly sad), thank you.

byzantium · « **Reply #38 on:** December 13, 2004, 10:47:47 pm »

Hi, see Link to Sharp 6000 ROM or the links in previous posts.

Please try using the Search next time as well

Good luck

antoniovf · « **Reply #39 on:** December 15, 2004, 03:34:41 pm »

Im triing to reflash with this intructions, only i want to know that i can back to the official version if i need. But the combination reset+q+t dont work. One stupid cuestion... The reset buton are in the back of the zaurus sl-6000, isnt it? I have this doubt because in my case dont work. Or is the power button I have to push? thanks.

dlee27 · « **Reply #40 on:** December 17, 2004, 01:46:56 am »

I'm trying to restore back to the Sharp Rom and it doesn't work. I did this successfully before a couple of times with the instruction previosly posted, so I don't know what went wrong. When I press q+t+reset both leds light on but after a short while both leds blinks forever. I know this leds should go out after NAND restore, but they blinks.

I also tried OZ 3.5.2 and it says:
"Seriously problem!!! Your Zaurus not SL-C700/750/760/860/6000 model. Cannot install OpenZaurus on unknown, press the ENTER key for reboot."

Any suggestion? Thanks.

thaak · « **Reply #41 on:** December 30, 2004, 09:31:05 pm »

Hi

Just checking would it be usefull to mirror NAND backups. Have some spare bandwidth and a webserver. Am willing to put a sight together. If you intrested just give a shout. Also very off topic have four gmail accounts to give away if anyone wants. You can email me NANDS or request for gmail at zaurus6000sl@gmail.com

Padron · « **Reply #42 on:** January 22, 2005, 10:15:00 am »

Quote

It looks like eddiectc and me are in the same ship (play arround with SL-6000 and no back-up VERY BAD GUYS).
I installed the NAND backup from guylhem and its looks like theres some modifications. When i try to make work the WIFI card does not work and it changes the old boot with the one used with the modified kernel.
BTW Ambicom bluetootj card does not work anymore too.

and so
if anyone here want to share your NAND backup eddiectc and me appreciate it a LOT (we promisse to do not do play again without backup, we promise).

PD Excuse my english, "Â¿alguien aqui habla espaÃ±ol ?"
[div align=\"right\"][a href=\"index.php?act=findpost&pid=50952\"][{POST_SNAPBACK}][/a][/div]

Padron · « **Reply #43 on:** January 22, 2005, 12:08:06 pm »

Sorry about that last post. I usually read and try installing software, and rarely request information because most questions are aswered and found with reading the threads and posts.

I've just purchased the 6000L . I'm new to the board and have been reading the posts and installing apps.

I installed the extreme.net nand and now my wifi doesn't work. Running a df shows /dev/root at 100%

I want to install the original sharp rom.
The problem is the link to "http://zaurus.thegrantclan.org/download/za...0217S6V112.zip" times out.

Is there an alternate site available where one could download the original sharp rom?

Thanks

6000l
512mb Sandisk SD
1gb sandisk CF
TRENDnet CD 10/100 ethernet adapter

Padron · « **Reply #44 on:** January 22, 2005, 12:28:09 pm »

Quote

Is there an alternate site available where one could download the original sharp rom?

Thanks

6000l
512mb Sandisk SD
1gb sandisk CF
TRENDnet CF 10/100 ethernet adapter
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

Found it at [a href=\"http://www.externe.net/zaurus/flash/]http://www.externe.net/zaurus/flash/[/url]

News:

Author Topic: How To Restore 6000 To Original State? (Read 60182 times)