Author Topic: Cacko Rom 1.22 Is Available!  (Read 67360 times)

ev1l

  • Hero Member
  • *****
  • Posts: 608
    • View Profile
    • http://bbshuffle.blogspot.com/
Cacko Rom 1.22 Is Available!
« Reply #255 on: April 12, 2005, 07:47:01 pm »
You need to remount the partition read/write before you can edit the file, I think.

charlesa

  • Jr. Member
  • **
  • Posts: 89
    • View Profile
    • http://
Cacko Rom 1.22 Is Available!
« Reply #256 on: April 13, 2005, 09:50:40 am »
Quote
You need to remount the partition read/write before you can edit the file, I think.
[div align=\"right\"][{POST_SNAPBACK}][/a][/div]

I forgot I saw this one before in 1.21.   (note: I was doing this too late at night)!    /usr is mounted as a cramfs or squashfs image,and can't be set rw.  There is a work around, however:

https://www.oesf.org/forums/index.php?act=ST&f=26&t=4713

The other thing about the base station SSID not containing spaces is maybe something that should go in the FAQ?

FWIW,

C!
« Last Edit: August 01, 2020, 08:37:59 am by Varti »

craigtyson

  • Sr. Member
  • ****
  • Posts: 462
    • View Profile
Cacko Rom 1.22 Is Available!
« Reply #257 on: April 13, 2005, 12:39:57 pm »
Ah ha Solves my question too.  Editing inetd.conf

Cheers
Craig
SL-C1000, Angstrom GPE 2007.12r13
Ambicom WL1100C, SanDisk UltraII 1GB SD
 
Old Faithfull - SL-5500 battery out of the C750 (see below) TKC v1 (New) 1GB SD
Dead - SL-C750, Cacko 1.23 lite (Dropped, very messy!)
Ambicom WL1100C, SanDisk Dead - 1GB SD
Keep your Z on a bungee, you never know.....

cfchew9238

  • Newbie
  • *
  • Posts: 10
    • View Profile
Cacko Rom 1.22 Is Available!
« Reply #258 on: April 16, 2005, 02:36:32 pm »
I am new here using C860, and just installed the cacko 1.22, but need advise how to make the Symbol Wifi works. Please advise.

Thank you.

cfchew9238

  • Newbie
  • *
  • Posts: 10
    • View Profile
Cacko Rom 1.22 Is Available!
« Reply #259 on: April 18, 2005, 09:00:42 am »
After studying the msgs, finally got the Symbol card working, smiling all the way while surfing the internet, it is fast, and much faster than my the other unit of Sigmarion III.

Input of SSID in the c860 is the key to make the Symbol cf card running (but at the same timeI turned off the autoconnection)

Somehow, I still failed to install the ipk files (qpe-filemanager, zeditor) which are needed to edit the conf files. For some reason, during installing the ipk file, the installer will pop up an error msg "The filename of this package includes character this application can't handle. Please change the filename and retry install". Really need help on this.

Using the Konsole is tough for me which need some times to catch up.

Thank you very much.

DRDR

  • Newbie
  • *
  • Posts: 46
    • View Profile
Cacko Rom 1.22 Is Available!
« Reply #260 on: April 19, 2005, 10:47:51 am »
Suggestion for an additional entry in the hostap_cs.conf file:

card "WAVEline Compact Flash Wireless Adapter"
  version "Compu-Shack Production GmbH", "WAVEline Compact Flash Wireless Adapter", ""
  #manfid 0xd601, 0x0002
  bind "hostap_cs"

With this new card I finally can use Wifi again. But I still do not know what the problem with the old one was...

albertr

  • Hero Member
  • *****
  • Posts: 535
    • View Profile
    • http://
Cacko Rom 1.22 Is Available!
« Reply #261 on: April 27, 2005, 09:28:23 am »
Does anyone have a tarball of /root & /home filesystems from Cacko's 1.22 ROM?
-albertr

tmk

  • Newbie
  • *
  • Posts: 5
    • View Profile
Cacko Rom 1.22 Is Available!
« Reply #262 on: June 30, 2005, 12:03:23 am »
Anyone managed to get Planex GW-CF11X to work with Cacko 1.22? It works in OpenZaurus (but there my PHS AirH" card doesn't work so no good + I prefer Cacko). Prism3 based apparently and needs to have some firmware uploaded - which happens on OpenZaurus (though it detects it and uploads SanDisk Connect Plus.. but that seems to work fine).

Observations:

I plug in the card and a pop-up says it's a Planex etc.

Seems to show up at eth0 rather than wlan0.

Wireless Monitor claims 100% quality, but there isn't any signal etc. the card doesn't show any link either so it's dead.

Tried all the solutions listed earlier in this thread and the ones in Cacko FAQ, but they don't work (uploading the .hex returns an error about input/output). As a side note, OpenZaurus seems to flash using a differently tool?

cardctl status always shows "[suspended]".

Any suggestions are appreciated. Thanks a lot in advance.

.tmk

wyk747

  • Newbie
  • *
  • Posts: 21
    • View Profile
Cacko Rom 1.22 Is Available!
« Reply #263 on: August 18, 2005, 11:35:15 am »
i am now using my c860 to post thx to this rom

i love it