Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - dproldan

Pages: [1] 2 3 4
1
C1000/3x00 General discussions / Announcing Zgrom 0.1
« on: December 16, 2012, 04:53:52 pm »
Just installed this in my SL-C1000.   Very good job!

2
Zaurus - pdaXrom / Looking For Transmission Ipk
« on: August 20, 2011, 07:35:26 am »
Hello

  Does anybody have the bittorrent client transmission lying around.  It was compiled by kkazakov13 but the feeds dissapeared long time ago.

   Thank you

3
I also come here and check the latest messages once a week.

  saddly, my Zaurus has been in a drawer for many months.   Lately,  I've been thinking into turning it into a torrent downloading machine,  will post about it when I start.

4
Ubuntu / How Do You Input Function Keys?
« on: April 20, 2009, 01:50:19 pm »
nope,  no funtion key work at all.   Do they work for you?

5
Ubuntu / How Do You Input Function Keys?
« on: April 19, 2009, 03:33:17 pm »
Yes,  I have those lines in xmodmap.  I'm using that Jaunty zubuntu install.

  I've even tried to put "F10" at those positions on all the number keys,  unsuccessfully.

  Finally.  I had to map it to the right shift key.  But of course I can only access F10.   Unfortunately,  openMSX on the zaurus is too slow to be usable at the moment.

  I guess Xbindkeys has something to do with this problem.  But even if I kill it,  function keys still don't work.

6
Ubuntu / How Do You Input Function Keys?
« on: April 14, 2009, 04:18:42 pm »
Yes,  changing standard letters work perfectly.  

  I supposed that pressing "Fn" + 1-0  would send F1-F10,  but it doesn't.   Is that the correct key combination?

Thanks

7
Ubuntu / How Do You Input Function Keys?
« on: April 14, 2009, 05:25:51 am »
I need to press F10 for entering a program option (openMSX),  but I'm lost.  I've tried modifying keymaps and modmaps with no luck

  I haven't found the way either witht the zaurus keyboard or an external USB keyboard.

  Any clue?

8
Spain / Aun Queda Vida
« on: January 05, 2009, 04:52:04 pm »
Quote from: ipenido
┬┐Cuantos usuarios espa├▒oles (aunque prefiero abrir el cero a todos los hispanohablantes) activos quedan que la conserven y cuantos que la usen habitualmente?

  Yo tengo una C1000 en casa para ebooks y trastear.  Y Una C3100 que llevo a casi todos lados,  conectandola al movil con BT la uso para el correo electronico,  web,  etc.

9
C1000/3x00 General discussions / C1000 No Rom Upload
« on: April 13, 2008, 02:45:42 pm »
Go to this site :

http://trisoft.de/en_c1000howto.htm

  and follow the instructions in the section :  In case a backup won't work (and only then !)

 That should restore the zaurus to an usable state.

10
Accessories / Sitecom CN-501 Bluetooth card, working?
« on: March 31, 2008, 01:57:55 pm »
Hi,

  It works fine in PDAXii13 after modifying this line in /etc/bluetooth/bt-uart.conf  

"Compact Flash", "Bluetooth Card", "", "":/dev/ttyS3 -s 921600 bcsp:/dev/ttyS3 baud_base 921600

  and deleting the second line with "Compact Flash", "Bluetooth Card",......

11
Android / Google Android M5-rc14 Installable Image Available!
« on: March 04, 2008, 11:35:57 am »
Quote from: zogs
ok it's normal but don't start , I'm waiting for a long time...I'm can see just the red line

  Same thing here.
  I'm getting this errors on the console:

 PANIC: handle_group_exit: xxxx leader xxxx

repeated,  where xxxx are different everytime.

 attached is the log-init file with the lowest number.  there are many after a while.

12
Zaurus - pdaXrom / Bluetooth In R198
« on: June 24, 2007, 12:07:26 pm »
Quote
actually, with SP8 installed, all that is set for you automatically...

/etc/rc.d/init.d/bluetooth start or stop will do the trick
[div align=\"right\"][a href=\"index.php?act=findpost&pid=163640\"][{POST_SNAPBACK}][/a][/div]

   That isn't working for me.  I still had to enter those commands for it to work.

   There are two entries for "Compact Flash", "Bluetooth Card", "", "" in bt-uart.conf  ,   could that be the reason?

13
Zaurus - pdaXrom / Bluetooth In R198
« on: June 24, 2007, 09:00:33 am »
It is working for me here with a Sitecom Compact Flash Bluetooth adaptor.

  Installed r198
  Installed SP8
  inserted card
  setserial /dev/ttyS3 baud_base 921600
  hciattach -s 921600 /dev/ttyS3 bcsp

  Then you can use hcitool scan,  etc.


  Thanks for your help!

14
SIMpad forum / Simpad Sl4 Replacement Screen
« on: June 07, 2007, 01:32:24 pm »
I did exactly that,  put a WP50 screen in a SL4.   It works fine,  at least for 1 year or so ,  when it developed the same problem i had with the original touch screen,  completely innacurate,  with strange cursor jumps.

15
Zaurus - pdaXrom / D-link Dcf-660w With R198
« on: June 05, 2007, 09:59:36 am »
I'm having a hard time trying to figure out what's wrong with my card,   hope you can help me.

  I have a SL-C1000 with r198 installed and Meanie's SP4 applied.
  I define all the network settings before plugging in the card as wlan0.

  when I plug it in,  it connects fine for some 30 seconds and then disconnects.  from that point,  nothing makes sense to me.
 
  sometimes it shows up with lspcmcia/pccardctl,  sometimes it doesn't.  

  many times,  the screen turns white until I unplug the card.  

  lsmod shows that orinoco, orinoco_cs, hermes, hostap_cs, hostap all are loaded.

  in /sys/bus/pcmcia/drivers,  there are hostap, ide_cs and orinoco subfolders.

  there are only three files in /etc/pcmcia/    shouldn't there be a lot of .opts files there?

  Here's a part of my dmesg after pluggind the card

Code: [Select]
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
ieee80211_crypt: registered algorithm 'NULL'
hostap_cs: 0.4.4-kernel (Jouni Malinen )
hostap_cs: setting Vcc=33 (constant)
hostap_cs: setting Vcc=33 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: Registered netdevice wifi0
hostap_cs: index 0x01: Vcc 3.3, irq 137, io 0xc4820000-0xc482003f
prism2: wifi0: operating mode changed 3 -> 2
prism2_hw_init: initialized in 320 ms
wifi0: hfa384x_cmd: entry still in list? (entry=c1cdb3a0, type=0, res=0)
wifi0: hfa384x_cmd: command was not completed (res=0, entry=c1cdb3a0, type=0, cmd=0x0121, param0=0xfc00, EVSTAT=8000 INTEN=0010)
wifi0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110, rid=fc00, len=2)
ieee80211_crypt: registered algorithm 'WEP'
wifi0: NIC: id=0x800c v1.0.0
wifi0: PRI: id=0x15 v1.1.1
wifi0: STA: id=0x1f v1.7.4
wifi0: registered netdevice wlan0
wifi0: LinkStatus=1 (Connected)
wifi0: LinkStatus: BSSID=00:80:5a:31:7b:9b
orinoco 0.15rc3 (David Gibson , Pavel Roskin , et al)
orinoco_cs 0.15rc3 (David Gibson , Pavel Roskin , et al)
ADDRCONF(NETDEV_CHANGE): wifi0: link becomes ready
wifi0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
wifi0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
wifi0: invalid skb->cb magic (0x00000000, expected 0xf08a36a2)
wifi0: hfa384x_cmd_issue: cmd reg was busy for 5 usec
wifi0: hfa384x_cmd: entry still in list? (entry=c1cdbae0, type=0, res=0)
wifi0: hfa384x_cmd: command was not completed (res=0, entry=c1cdbae0, type=0, cmd=0x0021, param0=0xfd51, EVSTAT=8888 INTEN=8888)
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6)
pccard: card ejected from slot 0
wifi0: hfa384x_cmd: entry still in list? (entry=c1cdbae0, type=0, res=0)
wifi0: hfa384x_cmd: command was not completed (res=0, entry=c1cdbae0, type=0, cmd=0x0021, param0=0xfd51, EVSTAT=8888 INTEN=8888)
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6)
wifi0: hfa384x_cmd: entry still in list? (entry=c3e5b520, type=0, res=0)
wifi0: hfa384x_cmd: command was not completed (res=0, entry=c3e5b520, type=0, cmd=0x0002, param0=0x0000, EVSTAT=8888 INTEN=8888)
hostap_cs: Shutdown failed
wifi0: removed pending cmd_queue entry (type=1, cmd=0x0011, param0=0xf100)
wifi0: removed pending cmd_queue entry (type=0, cmd=0x0021, param0=0xfd51)
wifi0: card already removed or not configured during shutdown
wifi0: hfa384x_cmd: command was not completed (res=0, entry=c1cdbae0, type=0, cmd=0x0021, param0=0xfd51, EVSTAT=0000 INTEN=0000)
wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd51, len=6)

  Again,  sometimes it works fine for 15-20 minutes and suddenly the light turns off.

  I've tried to trace the problem,  but, in my ignorance,  nothing makes sense to me.

  Help!

TIA

Pages: [1] 2 3 4