Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Yasen

Pages: [1] 2
Angstrom & OpenZaurus / Mirror Of
« on: March 17, 2007, 06:57:52 am »
Is it possible to make local feed mirror and how could i make this?

Angstrom & OpenZaurus / Hentges 3.5.3 Poodle
« on: September 12, 2006, 04:37:41 am »
Dose anybody have publicly avaible mirror for this. Maybe CoreDump is having problems.

General Discussion / Is Elsi Down Or Just My Provider...
« on: September 10, 2006, 01:51:18 pm »
Is there anyone who have access to it?

Angstrom & OpenZaurus / Oz & Poodles Problems
« on: September 15, 2005, 03:44:30 am »
But I cant use it like it should be used so I' geting back to Sharp.
1. Hentges & bootstrap boot ok.
2. Cardfs & altboot are great idea. Cardfs was very useful for me but altboot couldn't be tested because of lacking of ext2 images.*
3. Opera works fine after some tweaks

Probably Jeode & Hancom will too but havent tryed.

1. Can't boot nether Opie nor GPE standart images.
2. I have to move one entry from hermes.conf to hostap_cs.conf if I wont WiFi.
3. After 3-4 instaling GUI and console ipkg tool stops to work freezinf my z

*Here more about ext2 images.

And before flaing me that forums are nor bugtrackers and etc. I want to say few things.
I'm not a Linux user. Moustly I work on Windows. I belive I have good enoght knowage about OS( have worked hardly on dos and almoust every type of Windows and have some basic knowage about *IX) and computers. I'm not afraid of console tryed alotof things there ro make Opie suitable for me.
So I give up.
At least till next release of OZ & Hentges.
From what I've see in Hentges it's  closer to what I would use on my Z. Keep it improving.

Sharp ROMs / usb storage modules question
« on: November 10, 2004, 11:04:59 am »
Here I found some modules for usbstorage. Can some one explain me how to use them. Thank you

Angstrom & OpenZaurus / Repartitioning 5600
« on: November 08, 2004, 09:34:54 am »
Here I found this:
Analysis of the previous message showed that the kernel seems to partition the MTD
If this is true can 5600 be repartitioned so all flash memory is mounted to "/"?

Angstrom & OpenZaurus / When New OZ is going tobe relized
« on: November 05, 2004, 04:54:51 am »
Will there be changes in CF drivers. I'm interesed in Orinoco drivers. This from 3.5.1 don't work with my Trendnet card.

5x00 General discussions / Repartitioning 5600?
« on: November 04, 2004, 07:06:18 am »
Has anyone thought for this and gether some info. I think that variant for Sharp rom without all sym links and only one partition will be more useful.
Any sugestion coments will be appreciated.

General Discussion / Custom rom question
« on: October 26, 2004, 08:57:46 am »
I don't have Linux box. Have made some changes on the Z directly. The question is: Will file produced from "dd if=/dev/mtdblock0 of=/mnt/cf/zaurus.rom"  be initrd.bin file with which I can reflash my Z?

PS BTW where hase gone

User Request for Applications / driver fo TEW-222CF
« on: October 04, 2004, 05:16:09 am »
Ii is CF WiFi card. I'm redy to help with anything but I can't code and my knowage for Linux type system is very limited.
Thanks in advance.

Angstrom & OpenZaurus / TEW-222CF locks OZ 3.5.1
« on: September 21, 2004, 04:57:38 am »
Screen becoms white on the right when card is pluged in and there is no response from Zaurus. The only way to get Z working is hard reset. Here is thread for sharp rom

Accessories / Network help
« on: September 10, 2004, 07:38:07 am »
Could some one explain to a n00b how to start this card. I found this topick in sharp dev net but I'm not very good in linux so I cant understemd what I have to do.
Please help.
Thanks in advance.

General Discussion / wifi power consumation ?
« on: July 30, 2004, 05:44:10 am »
The only wifi cf card which I can buy is Trendnet TEW-222CF.This are technikal specifications:
Adapter Type: CompactFlash Type-I
Standards: IEEE 802.11b, Wi-Fi
Data Rate: 11Mbps, 5.5Mbps, 2Mbps, and 1Mbps
Module Technique: Direct Sequence Spread Spectrum (DSSS), CCK, DQPSK, DBPSK
Antenna: Internal Chip Antenna
Media Access Protocol: CSMA/CA with ACK
LED Indicator: Link, Act
Frequency: 2.4 to 2.4835GHz (Industrial Scientific Medical Band)
Output Power: 15dBm (typical)
Receiving Sensitivity: -82dBm @11Mbps with 10-5 Bit Error Rate (BER) (typical)
Power Requirement:
Operating Voltage: 5V or 3.3V
TX: 300mA (max)
RX: 200mA (max)
Sleep Mode: 50mA
Channels: 11 Channels (US & Canada)
Dimensions: 69 x 43 x 6.5 mm (2.7 x 1.7 x 0.26 inch)
Weight: 15g (0.48oz.)
Operating: 0° ~ 65° C (32° ~ 149° F)
Storage: -20° ~ 75° C (-4° ~ 167° F)
Humidity: Max. 95% (Non-condensing)
Certification: FCC, CE, EN300328 and EN300826 in Europe
Is it suitable for my Z and do I need some software to use it. Has any one had experience with that card? Thank you in advance.

General Discussion / where is ... ?
« on: July 16, 2004, 10:15:43 am »
Hi all,
yesterday I tryed to delete some build in apps which I dont use and dont like (such as Texeditor, ImageViewer, Snake, Asteroids and so on). I followed sym links and found that many of them, and some others which I use, are linked to quicklounch. Where are the real progs and how can I delete them?
thank you.

General Discussion / How to run .jar aplication?
« on: July 12, 2004, 10:09:48 am »
I need this on my Z. Can anybody explain me how to run .jar file ?

Pages: [1] 2