Author Topic: Genesis Neogeo Snes Turbografx Nes Gameboy Emu (Read 462086 times)

aka-ranma · « **Reply #135 on:** March 16, 2006, 11:39:20 pm »

Hi Cresho,

Tks for the great EMUs--finally playing TG 16 games. It's like playing on Turbo Express, only better

I downloaded from your site:

http://home.earthlink.net/~cresho/start.htm

And I have the following programs installed:

keyhelper 1.2.2-1.ipk
libsdl_1.2.5-slzaurus20050410_arm.ipk
libSDL-mixer 1.26-Zsports-0.ipk
libmad_0.15.0b-zporrts-0.ipk
snes9x_SDL-2_arm.ipk
zemufe_0.1.1-3ex_arm.ipk
znester_7.1-1_arm.ipk
zpce_0.3.4-1_arm.ipk

Also, under interal disk, I created "Custom" folder and put "keyhelper.xml" there.

But I can't get many roms (like Blazing Lasers, Bonk, Final Lap Twin, Neutopias, etc) to run. A black screen appears and the tap bar apperas on the right side

And like others (well initially), I can't get the control to work. They are reversed.

You have "do not look at this unless you have a key rotation problem" zip file.
And under that, you have:

libSDL_1.26-zports-5Marm.ipk
zpce RC file
znester RC file

So, I didn't do anything with them.

And I haven't tried to enter any codes or anything either. On the "Frontend Setting", "ETC", there is ".sh path" & "Expansion" Do I have to put codes under there? Or from "Qkonsole"? Or is it not neccessary? I read thru this thread, & it's kind of confusing Yep, I am a total newbie one of my main criteria that made me buy C3100 was because it can play emus. So...

Sorry for the long post. Any help would be really great. I am using Sharp ROM.

Thanks in advance

PS. If it's any help--most likely not--the only program I have installed are the mcconvert, kino 2 (& related files), automounter c3000.

Cresho · « **Reply #136 on:** March 17, 2006, 12:54:26 am »

your lucky i read the forums on a daily basis. spare time, etc.

make sure you also have sudo_0.1_arm.ipk and zlib_1.2.3-1_arm.ipk

those games (which happen to be my favorites) do not play on the z. try bonk 2, legendary axe 1 and 2, galaga 90 which play extremely well on the z.

if you have problems with one sdl vs other, uninstall one and install other but do not have both installed at the same time

i am reffering to libsdl_1.2.5-slzaurus20050410_arm.ipk and libSDL_1.2.6-zports-5_arm.ipk

those two will fix your keypad problems. If your still having problems, ill create ipk files and post them for you to try with corrected key.

aka-ranma · « **Reply #137 on:** March 17, 2006, 02:21:28 pm »

Quote

your lucky i read the forums on a daily basis. spare time, etc.

make sure you also have sudo_0.1_arm.ipk and zlib_1.2.3-1_arm.ipk

those games (which happen to be my favorites) do not play on the z. try bonk 2, legendary axe 1 and 2, galaga 90 which play extremely well on the z.

if you have problems with one sdl vs other, uninstall one and install other but do not have both installed at the same time

i am reffering to libsdl_1.2.5-slzaurus20050410_arm.ipk and libSDL_1.2.6-zports-5_arm.ipk

those two will fix your keypad problems. If your still having problems, ill create ipk files and post them for you to try with corrected key.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=118970\"][{POST_SNAPBACK}][/a][/div]

Hi,

Thanks for the response. I did as you said. But the keyboard is still the same. When you have the time, may I have the ipk files?

Thanks again

PS

Maybe it's having 2?

libSDDL-mixer 1.26-zsports-0
libSDL 1.2.6-zsports-5

Cresho · « **Reply #138 on:** March 17, 2006, 04:22:42 pm »

i gaved you a pm....check all three-snes, nes and turbografx and let me know if it fixes it with libsdl1.2.6 or something. if it works, then ill update a few things and post the ipk here.

aka-ranma · « **Reply #139 on:** March 17, 2006, 04:53:49 pm »

Quote

i gaved you a pm....check all three-snes, nes and turbografx and let me know if it fixes it with libsdl1.2.6 or something. if it works, then ill update a few things and post the ipk here.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=119061\"][{POST_SNAPBACK}][/a][/div]

And PM sent! Please disregard the 1st PM. I was really glad that TG 16 & PMed you without testing the other formats. The lastest one was tested with the all 3 Emus.

(just 1 more to go )

Tks again.

aka-ranma · « **Reply #140 on:** March 17, 2006, 09:09:51 pm »

Tks to Cresho, it plays really great now--on all 3 formats Tks alot!

Cresho · « **Reply #141 on:** March 17, 2006, 09:11:59 pm »

okay.

If you guys don't want to hassle too much with this, i made a keypad rotation fix for the unit.

If you are expiriencing problems,uninstall everything and make sure this is the last thing you install.

New instructions.
--------------------------------------------------------------------
for c1000, c3100, c3200

Install
----------------------------------------------------
zpce_0.3.4-1_arm.ipk
snes9x_SDL-2_arm.ipk
zemufe_0.1.1-3ex_arm.ipk
znester_7.1-1_arm.ipk
libmad_0.15.0b-zports-0_arm.ipk
libSDL_1.2.6-zports-5_arm.ipk
libSDL-mixer_1.2.6-zports-0_arm.ipk

and this last file should be the last file to install If you have key problems. Also, remember to make this the last install. But do not install if the above ipk files are working properly.
zaurus-zemukeyfix-cxxxx_1.0_arm.ipk

--------------------------------------------------------------------

gab74 · « **Reply #142 on:** March 21, 2006, 10:56:53 am »

Only a little thing....
i see that the emulator is not at full speed for certain games: for example i play "pacmania" or "blades of steel" and the screen is slowly repainted...

is there a way to quick the emulator on C3100 ?

Thanks Cresho GOOD WORK !!!

Cresho · « **Reply #143 on:** March 23, 2006, 01:43:54 am »

Maybee I should post on how to reduce frames per seconds.

aka-ranma · « **Reply #144 on:** March 23, 2006, 01:59:49 am »

Quote

Maybee I should post on how to reduce frames per seconds.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=119877\"][{POST_SNAPBACK}][/a][/div]

Ok, I know I am getting greedy now but...

1. Is there any way that allows SNES/TG16/NES to play on full screen? The only thing that played on full display was Ninja Spirits for TG16--really looked great .

2. And is it best to install all the program files to the flash RAM, or to SD? Is it
possible?

Mine is on the flash RAM I think (since I installed it on the program area), & the games are on SD.

I am asking because, I did use alot of saves, & want to use less save as possible, if it is indeed being saved on the flash RAM. I just want to use Zaurus as long as I can . And if it is, I want to reinstall the programs to SD card.

And can you tell me where the save file is located? I know it's being saved on somewhere. But I can't find it anywhere on the files, or on search .

Thanks again!

gab74 · « **Reply #145 on:** March 24, 2006, 01:19:47 pm »

Quote

Maybee I should post on how to reduce frames per seconds.
[div align=\"right\"][a href=\"index.php?act=findpost&pid=119877\"][{POST_SNAPBACK}][/a][/div]

yes it will be a good thing posting how to reduce framse for seconds...so i think all can work well !

Cresho · « **Reply #146 on:** March 24, 2006, 01:22:35 pm »

sorry guys....i just ordered my z and its going to take about a week before i can answer these last few questions.

be patient.

i ordered the c-3200. a few weeks ago, i sold my c-1000

aka-ranma · « **Reply #147 on:** March 24, 2006, 03:41:03 pm »

Congrats on C3200!

andresgriego · « **Reply #148 on:** March 24, 2006, 03:51:36 pm »

Quote

sorry guys....i just ordered my z and its going to take about a week before i can answer these last few questions.

With an estimated arrival date of April 1?

You feeling lucky?

Papadon · « **Reply #149 on:** March 26, 2006, 07:55:00 pm »

Hey Cresho,

I'm wondering how you can change FRAMESKIP/VSYNC options for NES/SNES emulators and if there's a way to enable any software/hardware rendering like SUPEREAGLE, SUPERSAI, etc. Any help is appreciated...

Thanks,

News:

Author Topic: Genesis Neogeo Snes Turbografx Nes Gameboy Emu (Read 462086 times)