[new] Kernel 2.6.24.4 With Cpufreq

[2or0]

Updated: Jul. 16 2008
- RNDIS patch
- PRISM2_DOWNLOAD_SUPPORT and PRISM2_NON_VOLATILE_DOWNLOAD enabled
http://yonggun.tistory.com/72
-----------------------

The kernel 2.6.24.4was built with cpufreq patch. I added the autofs4 module to auto-mount SD and CF card.
http://yonggun.tistory.com/72

Last modified: Apr. 17 2008
-------------------------------------------

The kernel 2.6.24.3 was built with cpufreq patch.
http://yonggun.tistory.com/68

Last modified: Mar. 25 2008
-------------------------------------------

FIXED

--------------------------
I built the kernel 2.6.24 for eabi debian on Z. These are patched with angstrom patches and without cpufreq. I tested only on C3200. Please give a feedback ASAP.

This kernel works on Cxx00 series.

 - There are the kernels for sharp loader and for uboot.

 - FUSE, serial_cs and ieee80211_crypt_tkip modules work.

http://yonggun.tistory.com/66

---------------------------
Hi, I built kernel 2.6.24-rc7 for debain eabi. It works for my c3200. Maybe it works on c1000(). Would someone test it on C1000?

Also I uploaded the patch file. Someone interested in rebuilding the kernel, can use it.

http://yonggun.tistory.com/64

[Vitel]

Hi 2or0,

Thanks a lot for the new version. I've just tried it on my C1000. It is successfully loaded  However, I've found two troubles:
1. I cannot start booting from SD card if CF card is not inserted. I think it would be great to compile something like
kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p1 and/or kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p2
In this case we do not have to insert CF card and hold '1' key each time we reboot C1000.
2. Cannot modprobe serial_cs. This is from dmesg:
serial_cs: Unknown symbol serial8250_unregister_port
serial_cs: Unknown symbol serial8250_resume_port
serial_cs: Unknown symbol serial8250_register_port
serial_cs: Unknown symbol serial8250_suspend_port
This module is required for bluetooth cards.

[2or0]

Hi 2or0,

Thanks a lot for the new version. I've just tried it on my C1000. It is successfully loaded  However, I've found two troubles:
1. I cannot start booting from SD card if CF card is not inserted. I think it would be great to compile something like
kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p1 and/or kernel.img-2.6.22.9-yonggun-eabi-mmcblk0p2
In this case we do not have to insert CF card and hold '1' key each time we reboot C1000.
2. Cannot modprobe serial_cs. This is from dmesg:
serial_cs: Unknown symbol serial8250_unregister_port
serial_cs: Unknown symbol serial8250_resume_port
serial_cs: Unknown symbol serial8250_register_port
serial_cs: Unknown symbol serial8250_suspend_port
This module is required for bluetooth cards.

1. From kernel 2.6.23.x, kernel has something wrong. With Uboot I cannot boot properly regardless of booting option. This kernel has to boot into /dev/hda1, but it makes error if I don't press "1" when it boot. I cannot fix it.  

2. I added serial_cs modules.  

[Vitel]

2. I added serial_cs modules.

I've updated kernel modules, but result is still the same: serial_cs: Unknown symbol...

[scottlfa]

Will this boot straight too the HDD (hda1) in the 3100?  Without having to press a button during boot?

[same]

hello scott

in the web page http://yonggun.tistory.com/64 it's said: press 2 to boot from hda1 or 1 from sd when you restart the system.

I also hate that press "2" button startup process  
Sometimes when reboting I end up removing the battery due to SD kernel panic lock, which is a procedure that I don't like at all, maybe there's another solution to reboot when kernel panic'd, I couldn't find.

[scottlfa]

I was vainly hoping I did not read that line ... -sigh- Well its all cool then, will move up too 2.6.24 soon.

[nokamoto]

Hi! Thanks to new version!!

I have 802.11g CF WLAN card(PLanex GW-CF54G) and now it worked!!

http://nokamoto.blogspot.com/2008/01/zauru...x-gw-cf54g.html

[qaz]

Great news! I have Pretec Marvell card, but I will probably wait for non-uboot kernel.

[2or0]

I updated the kernel 2.6.24. Please see the 1st post.

[qaz]

I updated the kernel 2.6.24. Please see the 1st post.

I am testing new kernel now, sharp bootloader version.
My marvell wi-fi card works for the first time, thanks to 2or0 and nokamoto!
The only problem I experieced for now is that tskeys eats 100% CPU after starting X. I used angstrom kernel before, so maybe some cfg files need to be tweaked for this version of kernel.

[2or0]

I updated the kernel 2.6.24. Please see the 1st post.

I am testing new kernel now, sharp bootloader version.
My marvell wi-fi card works for the first time, thanks to 2or0 and nokamoto!
The only problem I experieced for now is that tskeys eats 100% CPU after starting X. I used angstrom kernel before, so maybe some cfg files need to be tweaked for this version of kernel.

I don't have your problem. When I started xwindow, nothing happened as usual.

But I have a problem: When I suspend the system, I cannot turn it on and I should reset the system. Does anyone have this problem? This is the critical problem.

yonggun

[Vitel]

I've just tried the new version on C1000 with uboot. It looks like both kernel.img.2.6.24-yonggun-sd1 and kernel.img.2.6.24-yonggun-sd2 use mtdblock2 as root device. Because of this my Z fails to load with kernel panic.
If it's hard to fix this problem, I think it can be avoided by changing partition table on SD card.

[ecc_hy]

I have compared the files as binary:
 kernel.img.2.6.24-yonggun-hda1
 kernel.img.2.6.24-yonggun-sd1
 kernel.img.2.6.24-yonggun-sd2

There are same file. The md5 of files are same.

[qaz]

But I have a problem: When I suspend the system, I cannot turn it on and I should reset the system. Does anyone have this problem? This is the critical problem.

yonggun

Yes me to - resume is broken.